考虑气体扩散渗透的隔热材料瞬态隔热性能数值模拟

高超声速飞行器机动飞行时环境压力变化导致隔热材料沿厚度方向存在压力梯度,进而引起隔
热材料内气体的扩散渗透,影响隔热材料隔热性能。为研究气体扩散渗透对隔热材料隔热性能的影响,建立了
隔热材料内气体扩散渗透模型,采用罗斯兰德近似、有限体积法建立了隔热材料内扩散渗透及辐射导热传热计
算模型,对气体扩散渗透条件下的瞬态隔热性能进行了数值模拟。算例模拟结果表明:对2 cm 厚纳米隔热材
料,在外界气压为0. 1 MPa,绝热面为真空的状况下,当渗透率大于10-14 m2 时,气体扩散渗透开始影响隔热材
料内传热,导致隔热性能降低,气体黏性系数对气体扩散渗透有显著影响,随着黏性系数降低,气体扩散渗流现
象显著;衰减系数对绝热面温度响应有显著影响,随着衰减系数增大,绝热面温度响应显著降低。     

镁合金在空空导弹导引头上应用可行性研究

对空空导弹导引头上镁合金材料的选用、加工、表面处理、结构装配、盐雾试验等方面进行了研究。首先在目前应用较为广泛的镁合金材料牌号中选取了适合导引头结构应用的MB15来代替目前应用的铝合金材料,并选取导引头中具有代表性的薄壁、高精度试验件进行了加工试制;其次对试制试验件选取不同的表面处理方法进行表面处理,通过装配、盐雾试验来验证其表面处理的防腐蚀能力;最后给出了在空空导弹导引头上应用镁合金的合理建议。     

Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

高温合金K38G微晶涂层氧化动力学研究

研究了溅射微晶涂层对K38G在800℃和900℃空气中氧化动力学的影响。发现微晶化后K38G的氧化动力学与经典的抛物线规律存在负偏差。分析认为,微晶化后氧化物形核率大大提高,氧化膜中的扩散由晶格扩散变为晶界短路扩散为主,从而改变了氧化膜的生长动力学。根据Wagner高温氧化的基本理论,对微晶合金高温氧化动力学规律进行了探讨,导出微晶K38G合金氧化动力学遵循四次方规律,即x4=kPt。     

关于对喷水室热工计算公式的分析及修正

通过分析喷水室内水和空气之间的热质交换过程，指出目前采用的热工计算公式的不足，并在此基础上推导出喷水室热平衡方程新公式，对理论教学起到一定的指导作用。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

TEMPERATURE EFFECT ON OXIDATION PROTECTION LIFE OF MULTI-LAYER COATING FOR C/C COMPOSITES

Carbon-carboncomposites(C/C)exhibitexcellentstructuralpropertiesabove165OC,andareconsideredasthemostpromisingcandidatematerialsforthehighthrust-weightratioturbineengines.Asakeytechnologyforthehigh-temperaturestructuralapplicationsofC/C,oxidationprotectionispaidmoreandmoreattentionrecently.TheoxidationprotectionllfeofacoatedC/Cisdeterminedbyenvironmenta1temperature,becauseitnotonlydecidesthether-mochemicalconditionsofinterfacesinacoating,butalsocontrolsthedynamicprocessofoxy-gendiffusion.The…     

充气气囊减速方案的气动设计研究

减速是航天飞行器必须面对的问题。充气气囊减速方案利用柔性编织材料外加涂层方式构成气囊，利用气体发生器快速产生高压气体，集防热、减速和着陆减振功能于一体，重量轻、成本低、适用范围广、可靠性高。设计了满足减速需求的气囊外形，利用数值求解NS方程和工程计算方法进行了气动力的预测和比较分析，利用六自由度动力学模型与气动力的耦合计算，对减速效果进行了计算与分析，并对热环境、温度场、应力、热应力及变形进行了计算，还对分离不确定性进行了研究。地面引导性风洞试验和理论分析表明，充气气囊减速方案具有十分明确的减速效果和优点，可用于未来航天飞行器实现减速飞行目的的技术方案。