粘结层表面预处理对EB-PVD热障涂层循环氧化的影响

研究了在Ni3Al基高温合金基底上采用阴极电弧镀方法制备NiCoCrAlYHf粘结层、电子束物理气相沉积(EB PVD)方法制备Y2O3 ZrO2陶瓷层的热障涂层(TBCs)在1150～30℃之间的热循环氧化行为。通过对热循环过程中热障涂层界面韧性的测试和氧化行为的研究,分析了粘结层表面预处理工艺(喷丸和吹砂)对热障涂层使用寿命的影响。由于喷丸和吹砂会降低热障涂层的界面韧性,同时又促进了热生长氧化物(TGO)的生长,这些预处理工艺不利于提高热障涂层的寿命。     

The Cassini Cosmic Dust Analyzer

The Cassini-Huygens Cosmic Dust Analyzer (CDA) is intended to provide direct observations of dust grains with masses between 10⁻¹⁹ and 10⁻⁹ kg in interplanetary space and in the jovian and saturnian systems, to investigate their physical, chemical and dynamical properties as functions of the distances to the Sun, to Jupiter and to Saturn and its satellites and rings, to study their interaction with the saturnian rings, satellites and magnetosphere. Chemical composition of interplanetary meteoroids will be compared with asteroidal and cometary dust, as well as with Saturn dust, ejecta from rings and satellites. Ring and satellites phenomena which might be effects of meteoroid impacts will be compared with the interplanetary dust environment. Electrical charges of particulate matter in the magnetosphere and its consequences will be studied, e.g. the effects of the ambient plasma and the magnetic field on the trajectories of dust particles as well as fragmentation of particles due to electrostatic disruption.The investigation will be performed with an instrument that measures the mass, composition, electric charge, speed, and flight direction of individual dust particles. It is a highly reliable and versatile instrument with a mass sensitivity 10⁶ times higher than that of the Pioneer 10 and 11 dust detectors which measured dust in the saturnian system. The Cosmic Dust Analyzer has significant inheritance from former space instrumentation developed for the VEGA, Giotto, Galileo, and Ulysses missions. It will reliably measure impacts from as low as 1 impact per month up to 10⁴ impacts per second. The instrument weighs 17 kg and consumes 12 W, the integrated time-of-flight mass spectrometer has a mass resolution of up to 50. The nominal data transmission rate is 524 bits/s and varies between 50 and 4192 bps.This revised version was published online in July 2005 with a corrected cover date.     

Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

原子氧对Kapton／Al薄膜性能影响研究

模拟空间环境下原子氧辐照条件,通过采用固定的原子氧束流密度进行不同时间辐照试验,研究了温控涂层材料Kapton/Al薄膜的质量损失、光学性能、表面形貌和表面粗糙度的演化规律.试验结果表明,原子氧对材料的剥蚀量与原子氧的作用时间成正比例关系.材料辐照后太阳吸收率发生明显变化,而辐射率几乎不发生变化.辐照后试样表面的粗糙度,是影响太阳吸收率变化主要因素.随着辐照时间的增长,材料表面粗糙度增加,导致太阳吸收率增大.     

铝合金与橡胶软油箱抗老化涂层接触腐蚀机理研究

通过对7A04-T6包铝合金及去包铝合金与三种橡胶抗老化涂层材料在高温、高湿环境中的接触腐蚀产物SEM形貌分析及EDS成分分析,表明铝合金与橡胶抗老化涂层接触腐蚀形貌特征为点蚀,腐蚀严重时试样表面局部或全部被大量腐蚀产物所覆盖,腐蚀产物的主要元素为Al,C,O,Mg,Zn,Cl,Si,S.提出了铝合金与橡胶抗老化涂层"接触-扩散-吸附/沉积物层与电解质薄液膜层形成/腐蚀闭塞区形成/阴离子加速自催化腐蚀/点蚀-晶间腐蚀-剥落腐蚀"的接触腐蚀过程及机理.     

防静电白色热控涂层的耐空间环境及工艺性能

研究了防静电白色热控涂层（ACR-1）的耐空间环境性能及工艺性能。在模拟空间环境设施中研究了紫外辐照、电子辐照和质子辐照对涂层太阳吸收率（αs）的影响。结果表明ACR-1在地球静止轨道环境中具有较高的稳定性；经过3000当量太阳小时（ESH）的紫外光辐照后，△αs为0．02；质子辐照效应对涂层仅。的变化影响较大。另外，研究了涂层厚度对αs和其与基材结合力的影响，以及基材表面处理工艺对涂层在-196—150℃冷热交变循环试验中可靠性的影响。     

热处理对大气等离子喷涂纳米结构YSZ热障涂层晶粒长大的影响

采用大气等离子喷涂制备了纳米结构氧化钇稳定的氧化锆热障涂层。运用SEM ,TEM和XRD等方法研究了涂层和原料粉末的微观结构和相组成。结果表明 ,喷涂过程中平均晶粒大小由4 0nm变为 6 7nm ,涂层主要由亚稳四方相组成。涂层热处理结果显示 ,90 0℃以下晶粒长大速度缓慢 ,然而 1 0 0 0℃以上晶粒长大速度迅速增加 ,而且出现较多的单斜相     

铝合金与橡胶抗老化涂层接触腐蚀的影响因素研究

通过正交试验,研究了环境温度、相对湿度、时间、接触方式等因素对7A04-T6包铝及去包铝合金与橡胶抗老化涂层接触腐蚀的影响。研究结果显示:环境温度、相对湿度、铝合金与橡胶抗老化涂层接触的紧密程度都是铝合金腐蚀的显著影响因子;在高温、高湿的环境中,与橡胶抗老化涂层紧密接触会加剧铝合金腐蚀。     

国外航天运输系统防热系统,结构和材料的总体分析研究

对近年来国外航天运输系统包括飞船、航天飞机和空天飞机等的防热方案的选用方向、防热结构和防热材料的研究与应用以及发展方向进行了高度概括与分析，采用了新的分类方法，介绍了各种新型的防热系统、结构和材料。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.