弹道交班自适应算法研究

为实现复合制导不同制导弹道的平滑过渡,用二阶吻合法设计了一不同制导律间的指令交接导引段。建立了自适应弹道交接导引算法的模型。理论分析和仿真结果表明,该算法具较好的弹道过载平滑能力,有一定的应用价值。     

在二元柔壁自适应风洞中利用面元法进行三元模型实验

简要叙述了在西北工业大学二元柔壁自适应风洞中利用面元法进行二元半机翼模型试验的研究情况，分析了面元法的基本思想和部分试验结果。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

某型工程车多功能检测仪的硬件设计

设计的检测仪用于检测某型工程车的电控系统,以51单片机作为中央处理单元,以MAX392多路选择器实现多路选通,以CPLD扩展外围接口,可较好地实现信号的采集、存储和信息显示等功能。检测仪还具有代用功能,在紧急情况下可代替原车电控系统进行工作。     

TC11钛合金的热态变形行为研究

采用等温恒应变速率压缩试验法,研究了TC11合金在780℃-1080℃和应变速率为0.001s-1~70s-1范围内的高温压缩变形行为。考察了变形温度、应变速率及变形程度对流动应力的影响关系。结果表明,流动应力对变形温度和应变速率敏感,随变形温度升高和应变速率降低流动应力减小,特别是在α β两相区变形温度对流动应力的影响显著。     

XX—Ⅱ平尾六分量天平的研制

本文是国内第一台六分量部件天平的研制总结,文中对此类天平所遇到的一些棘手问题所采取的一些措施及实验结果作了介绍。     

对B2C领域两种营销渠道形式的比较探析

在B2C领域,传统营销渠道与网络营销渠道是一对相互竞争的矛盾。网络营销渠道是新生事物,凭借低成本优势得以迅速成长。传统营销渠道根基雄厚,且更贴近消费者的需求,因此仍吸引着大多数的消费者。网络营销渠道如何进一步发展,传统营销渠道如何吸收新的元素,不对两种营销渠道进行比较,是不能获得满意的答案的,而比较这两者之间的相对劣势比比较它们的优势更能引发思考。     

基于Web Service的B2B电子商务系统模型的研究

B2B电子商务是目前最具潜力的商务形式。但传统B2B电子商务系统的基本结构和交互接口均没有统一的标准和解决方案，带来了系统可重构性和可移植性差等缺陷。针对这种缺陷，结合Web Service技术，提出基于Web Service的B2B电子商务系统模型。该系统模型通过构建核心应用程序整合Internet和Internet范围内相对独立的Web Service，并作为供应链的一部分，能提供标准接口实现和其他应用程序如ERP，CRM和SCM等的交互，这种形式的B2B电子商务系统能很容易地进行开发和维护。最后以其中一个模块为例，给出了具体实现基于WebService的B2B电子商务系统的解决方案．     

高强度钢内螺纹冷挤压成形与强化试验研究

内螺纹冷挤压成形是提高内螺纹疲劳强度的有效方法.作者研制出挤压扭矩和温度的测量系统,并从理论上证明了挤压变形区金属在挤压过程中受到三向压应力的作用,这可以大大增加金属的塑性,改善内螺纹的成形条件.高强度钢内螺纹成形与强化的关键在于挤压丝锥结构的优化设计以及工件底孔尺寸、挤压速度和冷却润滑液的合理选择.疲劳对比试验结果表明:在两个不同应力水平下,用挤压丝锥挤压强化的300M高强度钢螺纹,其寿命是切削螺纹的4～30倍.     

高速CO2焊接过程稳定性分析

利用汉诺威焊接质量分析仪,检测CO2焊短路过渡过程的电参数信号,研究高速焊接情况下燃弧时间与短路过渡周期的变化规律,分析了高速CO2焊接过程中短路过渡各个电参数对焊接过程稳定性的影响。对短路与燃弧阶段的电流、电压波形进行分析,认为波形控制可以有效改善焊接过程的稳定性。