无源无线声表面波压力传感器校准技术研究

声表面波压力传感器是一种新型传感器,它的一大优势是具有无源无线信号传递特性,可以突破传统传感器线缆连接的限制,近年来受到国内外研究机构普遍重视。本文探讨了SAW压力传感器的校准技术,对某种商业传感器进行校准,使用最小二乘法分析校准结果,并进行不确定度评估。校准结果显示该传感器在误差、线性、重复性等方面可满足一定精度要求,通过进一步发展,有望在航天领域得到实际应用。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.     

航天器表面电荷激发空间静电场规律研究

从带电表面微元出发，通过求解泊松方程，得到带电介质平板表面邻近空间静电势的解析表达式，建立介质表面电位-介电常数模型，求得了带电介质平板表面电位、表面带电量和介质介电常数三者之间的关系式。结合典型的航天器表面介质材料带电案例，对此类圆盘结构介质平板带电问题进行了仿真分析，结果表明，在介质材料表面电位一定的情况下，表面电荷激发的空间静电势值随距离的增大而减小，并且距离介质表面越近，电势的空间变化率越大；在介质材料带电量相等的情况下，介质表面电位随着介质介电常数的增大而减小，并逐渐趋于一个稳定值，所以在一定范围内选择介电常数较大的介质材料可以降低介质的表面电位，减小介质间发生静电放电的几率。     

光波纳米推进技术中的表面等离激元增益光镊作用机理

为研究天线不同结构对表面等离激元（SPP）增益光镊作用的影响,建立天线-基底的电磁波传输耦合激元电场触发光梯度力的数值模型,并利用数值模型分析天线不同结构对SPP电场的影响规律,同时,这种电场变化规律对光镊增益有直接的数学关系,基于上述物理机制,获得不同天线结构对光梯度力产生的优化策略。为验证上述物理机制与优化策略的有效性,开展纳米颗粒的粒子图像测速（PIV）试验,天线材料为银,基底为二氧化硅,纳米颗粒为银,试验能够完好地观测到纳米颗粒在天线通道的运动情况。结果表明,光梯度力的增益机制在于激元电场强度和梯度两方面因素,前者随天线不对称性增强而先增大后减小,后者呈现一直增大趋势;纳米颗粒推动作用力的计算误差约为5.5%~13.8%,且试验值与计算值的趋势相符,一方面验证本文研究机理及优化策略的有效性,另一方面证明PFP技术的原理可行。     

硅烷偶联剂在防热涂料中的应用前景分析北大核心CSCD

硅烷偶联剂作为一种重要的处理剂,广泛应用于涂料、橡胶、塑料等领域。本文综述了硅烷偶联剂的结构特点和作用机理,介绍了硅烷偶联剂在常用涂料领域的几种典型应用,主要包括基体树脂增容、颜填料表面改性、涂层与基材连接,讨论了不同使用条件下影响硅烷偶联剂效果的因素,并对硅烷偶联剂在防热涂料中应用的发展趋势进行了展望。     

碳纤维增强复合材料车削表面质量分析

以PCD刀具车削加工短切碳纤维/酚醛复合材料的表观质量为研究对象,通过开展正交试验,采用三维测量技术,研究切削三要素和刀尖圆弧半径对工件加工质量的影响;通过Design Expert软件,对加工因素的显著性进行分析。结果表明,随着切削速度v和进给量f的增大,表面粗糙度Ra逐渐增大,随着切削深度a_p和刀尖圆弧半径r的增大,Ra逐渐变小;试验显著因素为刀尖圆弧和进给量;最佳加工参数为：v=160 r/min、f=0.15 mm/r、a_p=0.6 mm、r=0.6 mm;通过加工试验和建模分析验证,结论可靠。     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。     

表面温度传感器自动检定系统

介绍了一种用于表面温度传感器检定的数据采集、处理系统,此系统具有操作简单,使用方便,运行可靠等特点。     

卫星沿轨道运动对地面覆盖带外沿轨迹的确定

根据单参数平面曲线族包络线求解原理,给出了卫星沿轨道运动对地面覆盖带外沿轨迹的解,井讨论了地球旋转对地面覆盖带的影响。