COTS星载双模测控应答机基带设计与实现

提出了一种星载双模测控应答机基带设计方案,采用COTS（商用现货）器件实现,能较好解决星载功率受限和空间辐射效应引起的相关问题。测控应答机主处理器由反熔丝FPGA（现场可编程门阵列）实现,可在低功耗条件下保证最基本测控需求,解调上行DPSK（差分相移键控）信号,调制下行扩频信号;协处理器受主处理器控制,由SRAM（静态存储器）FPGA来实现,对上行扩频信号进行解扩解调。测控应答机可根据星载电源功率情况和不同测控任务切换模式,具有成本低、可靠性高、使用灵活等优势。     

基于CMMI的配置管理系统设计与实现

在研究软件配置管理方法的基础上,结合CMMI配置管理要求以及航天测控软件配置管理实际需求,建立配置管理实施框架,实现了一个一体化的配置管理系统。该系统能够辅助开发人员和配置管理人员便捷地制定配置管理计划,进行配置标识、建立和发布基线、跟踪和控制更改、执行配置审核和报告的自动生成,实现了CMMI对软件配置管理的要求,提高了配置管理的自动化管理水平和易用性。     

GPS软件接收机中载波相位测量的实现

GPS接收机载波相位测量的精度优于码相位测量,但却存在整周模糊度。利用码和载波相位测量的组合可以提高伪距的精度,进而改善接收机的定位性能。研究GPS软件接收机中载波相位测量的实现方法。通过处理实际采集的信号,分析码和载波相位测量组合方法的性能。实验结果表明,通过50 s的平滑,伪距误差可以减小到毫米量级。     

用于PSK载波提取的改进型逆调制环的研究

文章介绍了一种在全数字接收机中可用软件方式实现的MPSK载波提取方法———改进型逆调制环,并给出了性能分析。该方法适用于高速且速率可变的PSK调制技术,能较好地消除悬搁现象,适合于用DSP或FPGA来实现。     

微机集散控制上位机通用监控软件的设计与实现

介绍了一种以模块化结构，面向多对象的微机集散控制上位通用监控软件的设计思想，主要功能和实现方法，以及实际应用效果。     

平台防飞软件的设计依据

本文叙述了在导弹控制系统试验中因平台倒台而造成飞转的基本原理，为了控制国平台飞转而造成的故障损失，提出建立平台防飞软件的设计依据。     

公费医疗经费管理及信息分析系统

公费医疗经费管理及信息分析系统是应廊坊市卫生局的要求开发的。本系统以FOXPRO作开发平台，实现了用户提出的基本数据录入及修改、医疗经费核销与拨付、数据自动追加与核减、自动计算平均值及合计值、自动提供分析结果、浏览查询显示分析数据、打印分析总表及简化简化分析表、数据备份及恢复等功能。     

Low-cost precise measurement of oscillator frequency instability based on GNSS carrier observation

Global navigation satellite systems (GNSS) receivers can be used in time and frequency metrology by exploiting stable GNSS time scales. This paper proposes a low-cost method for precise measurement of oscillator frequency instability using a single-frequency software GNSS receiver. The only required hardware is a common radio frequency (RF) data collection device driven by the oscillator under test (OUT). The receiver solves the oscillator frequency error in high time resolution using the carrier Doppler observation and the broadcast ephemeris from one of the available satellites employing the onboard reference atomic frequency standard that is more stable than the OUT. Considering the non-stable and non-Gaussian properties of the frequency error measurement, an unbiased finite impulse response (FIR) filter is employed to obtain robust estimation and filter out measurement noise. The effects of different filter orders and convolution lengths are further discussed. The frequency error of an oven controlled oscillator (OCXO) is measured using live Beidou-2/Compass signals. The results are compared with the synchronous measurement using a specialized phase comparator with the standard coordinated universal time (UTC) signal from the master clock H226 in the national time service center (NTSC) of China as its reference. The Allan deviation (ADEV) estimates using the two methods have a 99.9% correlation coefficient and a 0.6% mean relative difference over 1–1000 s intervals. The experiment demonstrates the effectiveness and high precision of the software receiver method.     

SLUCUBE: Innovative high performance nanosatellite science and technology demonstration mission

The Space Systems Research Laboratory (SSRL) at Saint Louis University is developing SLUCUBE nanosatellite as part of the space mission design program. The objective of the mission is to demonstrate space capability of high performance nanosatellite components that has been developed at SSRL for the past three years. The objective of the program is to provide extremely low-cost and rapid access to space for scientists and commercial exploitation using commercial-off-the-shelf components. SLUCUBE is a double CubeSat with dimensions 10×10×20 cm and a mass of 2 kg. This nanosatellite features suite of technology demonstration components to enlarge the capability of space mission for such class of spacecrafts. The primary mission of SLUCUBE is to test and demonstrate several enabling technologies by flying a number of university developed high performance components. This paper describes the new developed technologies by providing details of specific components developed along with the R&D efforts and laboratory facilities. A brief discussion about the student involvement and educational benefits will also be presented.     

隔离信号调理模块自动校准系统设计

针对隔离信号调理模块型号多、参量多、使用量大,采用手动计量校准耗时耗力、容易出错、工作效率低等问题,在VEE Pro软件开发平台上,设计开发出一套隔离信号调理模块自动校准系统。该系统包括仪器信息记录、校准及打印输出三个主模块,测试过程采用实时测试显示,自动进行数据处理并存档。使用结果表明：该系统操作简便,提高了工作效率及准确度,降低了人为出错几率,确保了测试数据准确可靠。