低雷诺数下翼型层流分离泡及吹吸气控制数值研究

在低雷诺数下Eppler387翼型表面会出现层流分离泡现象,因此本文使用Fluent求解器开展吹/吸气控制翼型表面层流分离泡的数值研究,主要探究了射流位置、射流角度、射流速度比三个控制参数对层流分离泡控制的影响规律.研究结果表明,采用与SSTκ-ω湍流模型耦合的γ～(Reθt)转捩模型可以准确预测层流分离泡的位置;吹/吸气可以有效抑制低雷诺数下层流分离泡的发展,明显提高低雷诺数下翼型升阻比.固定射流位置,较大吸气速度比和较小吹气速度比可分别获得较好的流动控制效果,且吸气控制比吹气控制对层流分离泡的抑制作用更加有效.     

Scaling of interaction lengths for hypersonic shock wave/turbulent boundary layer interactions

The interaction length induced by Shock Wave/Turbulent Boundary-Layer Interactions (SWTBLIs) in the hypersonic flow was investigated using a scaling analysis, in which the interaction length normalized by the displacement thickness of boundary layer was correlated with a corrected non-dimensional separation criterion across the interaction after accounting for the wall temperature effects. A large number of hypersonic SWTBLIs were compiled to examine the scaling analysis over a wide range of Mach numbers, Reynolds numbers, and wall temperatures. The results indicate that the hypersonic SWTBLIs with low Reynolds numbers collapse on the supersonic SWTBLIs, while the hypersonic cases with high Reynolds numbers show a more rapid growth of the interaction length than that with low Reynolds numbers. Thus, two scaling relationships are identified according to different Reynolds numbers for the hypersonic SWTBLIs. The scaling analysis provides valuable guidelines for engineering prediction of the interaction length, and thus, enriches the knowledge of hypersonic SWTBLIs.     

Design and analysis of a hypersonic inlet with an integrated bump/forebody

Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However, the design and analysis of bump in hypersonic flow was still few.In this paper, the mechanism of a supersonic bump inlet is introduced to the design of hypersonic forebody.A hypersonic inlet with an integrated bump/forebody is obtained by the Method Of Characteristics(MOC) based on a chin inlet.Numerical simulations show that the modified inlet achieves diversion of low-speed flow.Besides, the integrated bump/-forebody is also beneficial to inlet start.During the starting process, the shape of the separation zone is rebuilt by the modified forebody surface which makes spillage much easier.This new design leads to a reduction of the self-start Mach number by 0.95.     

斜激波串与上游激波干扰特性试验研究

为研究斜激波串在背压条件下前移与上游激波相互干扰的流场结构和运动规律，在来流为马赫数 2.7 的直管道内设计一种等宽度斜楔，采用动态压力测量、高速纹影和粒子图像测速(PIV)技术等手段进行了试验。研究结果表明：内置斜楔在管道内产生入射激波、分离激波、膨胀波、再附激波和激波诱导分离等复杂上游激波流场，在分离区附近形成有顺压梯度和逆压梯度的区域。当增大下游压比时，斜激波串逐渐向上游激波流场移动；经过斜楔产生的分离区时，斜激波串的移动速度急剧提升，同时出现非对称分离偏转方向的切换。对比了三种长度尺寸的等楔角斜楔所产生的上游激波流场的差异性，发现在相同的斜楔前缘起始点和楔角时，随着斜楔长度的增加，上游激波流场中激波诱导的分离尺度逐渐变大。     

铝箔气泡复合材料的制备及隔热性能研究

通过干法复合工艺及流延复合工艺制备了一种隔热性能优良、性价比高且具有三明治夹心结构的新型保温材料——铝箔气泡复合材料,并研究了气泡层数、气泡直径、反射层结构及熟化温度对铝箔气泡复合材料隔热性能的影响。结果表明,铝箔气泡复合材料的热导率随气泡层数的增加而增大,随气泡直径的增大而减小,铝箔在反射层结构中的位置对材料热导率有影响,40~100℃×24h熟化,热导率下降,隔热性能提高。     

水中上升气泡体积变化率的图像分析技术

水中上升气泡的体积变化率是舰船自消隐特种气幕技术等诸多研究的重要基础.鉴于当前对这一体积变化率研究的紧迫需求,提出并较为深入地研究了水中上升气泡体积变化率的图像分析技术.首先,在理论研究的基础上,专门建立了分析计算的数学模型;进而给出了分析的实施方法,即利用摄像法获取水中上升气泡的图像序列,并从中得出所需图像的相关信息,再利用建立的模型即可求出其体积变化率;同时,设计了专门的实验,初步验证了这一分析技术的可行性.     

展向不同间距壁面粗糙元对近壁湍流拟序结构的影响

采用氢气泡流动显示技术,研究了壁面不同展向间距粗糙元对近壁湍流拟序结构的影响。实验中粗糙元布置在氢泡丝前,其间距按如下两种排列设置：粗糙元直径的0、1和3倍,等间距1、2和4cm;每种情况粗糙元直径均为2.3、4和6mm。基于平均流速和水力直径的流动雷诺数从14000到48000变化。实验观测了光滑壁面和粗糙元壁面的近壁湍流拟序结构条带特征。发现：对于两种不同排列,相同雷诺数和相同粗糙元间距条件下条带有量纲间距均随着粗糙元直径增大而减小,条带有量纲高度均随粗糙元直径的增大而增大;相同雷诺数和相同直径粗糙元条件下条带有量纲间距均随着展向间距增大而增大,条带有量纲高度均随展向间距的增大而减小。粗糙元壁面湍流条带有量纲间距均比光滑壁面小,条带有量纲高度均比光滑壁面大。研究结果对近壁湍流的流动控制具有重要指导意义。     

非定常低雷诺数流数值模拟方法研究

低雷诺数翼型流动的一个重要特征是分离泡的产生,并且分离泡通常是非定常的。基于有限体积法,N-S方程和S-A模型的控制方程非耦合求解,时间均采用牛顿型LU-SGS方法推进,无粘项和粘性项用中心差分方法离散计算,在计算非定常流场时,采用伪时间子迭代方法,湍流模型计算时采用在固定点转捩,研究了二维翼型低雷诺数流粘性流动的数值模拟方法,并利用所开发的非定常可压缩粘性流计算方法,数值模拟了在低雷诺数下两种翼型的非定常流动。计算结果表明：气动力系数及分离泡呈规则的周期性变化,证明方法是成功的、可行的。     

垂直上升弹状流中弹状氢气泡运动速度

针对垂直管路内气液两相流实验化困难的问题,运用建模仿真的方法建立了竖直管路中弹状流气泡的运动模型,模拟了弹状氢气泡在垂直管路的上升过程,并对其运动速度进行了研究.仿真结果表明:在静置的竖直管道内,充分发展的弹状氢气泡的速度基本上以0.2265m/s的速度匀速上升;弹状氢气泡在流动液氢中运动时,其速度模型中的速度系数与流体的速度有关,当雷诺数从220上升到6400时,其系数的值从1.83下降到1.14;在未充分发展的弹状流系统中,气泡间距对气泡速度分布有着影响,其上升速度随着气泡间距的减小而增大.      

Effects of surface roughness on the aerodynamic performance of a high subsonic compressor airfoil at low Reynolds number

The aerodynamic performance of compressor airfoil is significantly affected by the surface roughness at low Reynolds number (Re). In the present study, numerical simulations have been conducted to investigate the impact of surface roughness on the profile loss of a high subsonic compressor airfoil at Re = 1.5 × 10⁵. Four roughness locations, covering 10%, 30%, 50% and 100% of the suction surface from the leading edge and seven roughness magnitudes (R_a) ranging from 52 to 525 μm were selected. Results showed that the surface roughness mainly determined the loss generation process by influencing the structure of the Laminar Separation Bubble (LSB) and the turbulence level near the wall. For all the roughness locations, the variation trend for the profile loss with the roughness magnitude was similar. In the transitionally rough region, the negative displacement effect of the LSB was suppressed with the increase of roughness magnitude, leading to a maximum decrease of 14.6%, 16.04%, 16.45% and 10.20% in the profile loss at R_a = 157 μm for the four roughness locations, respectively. However, with a further increase of the roughness magnitude in the fully rough region, the stronger turbulent dissipation enhanced the growth rate of the turbulent boundary layer and increased the profile loss instead. By comparison, the leading edge roughness played a dominant role in the boundary layer development and performance variation. To take fully advantage of the surface roughness reducing profile loss at low Re, the effects of roughness on suppressing LSB and inducing strong turbulent dissipation should be balanced effectively.