Impact of ITRS 2014 realizations on altimeter satellite precise orbit determination

This paper evaluates orbit accuracy and systematic error for altimeter satellite precise orbit determination on TOPEX, Jason-1, Jason-2 and Jason-3 by comparing the use of four SLR/DORIS station complements from the International Terrestrial Reference System (ITRS) 2014 realizations with those based on ITRF2008. The new Terrestrial Reference Frame 2014 (TRF2014) station complements include ITRS realizations from the Institut National de l’Information Géographique et Forestière (IGN) ITRF2014, the Jet Propulsion Laboratory (JPL) JTRF2014, the Deutsche Geodätisches Forschungsinstitut (DGFI) DTRF2014, and the DORIS extension to ITRF2014 for Precise Orbit Determination, DPOD2014. The largest source of error stems from ITRF2008 station position extrapolation past the 2009 solution end time. The TRF2014 SLR/DORIS complement impact on the ITRF2008 orbit is only 1–2 mm RMS radial difference between 1992–2009, and increases after 2009, up to 5 mm RMS radial difference in 2016. Residual analysis shows that station position extrapolation error past the solution span becomes evident even after two years, and will contribute to about 3–4 mm radial orbit error after seven years. Crossover data show the DTRF2014 orbits are the most accurate for the TOPEX and Jason-2 test periods, and the JTRF2014 orbits for the Jason-1 period. However for the 2016 Jason-3 test period only the DPOD2014-based orbits show a strong and statistically significant margin of improvement. The positive results with DTRF2014 suggest the new approach to correct station positions or normal equations for non-tidal loading before combination is beneficial. We did not find any compelling POD advantage in using non-linear over linear station velocity models in our SLR & DORIS orbit tests on the Jason satellites. The JTRF2014 proof-of-concept ITRS realization demonstrates the need for improved SLR+DORIS orbit centering when compared to the Ries (2013) CM annual model. Orbit centering error is seen as an annual radial signal of 0.4 mm amplitude with the CM model. The unmodeled CM signals show roughly a 1.8 mm peak-to-peak annual variation in the orbit radial component. We find the TRF network stability pertinent to POD can be defined only by examination of the orbit-specific tracking network time series. Drift stability between the ITRF2008 and the other TRF2014-based orbits is very high, the relative mean radial drift error over water is no larger than 0.04 mm/year over 1993–2015. Analyses also show TRF induced orbit error meets current altimeter rate accuracy goals for global and regional sea level estimation.     

Uncertainties and effects on geocenter motion estimates from global GPS observations

Global positioning system (GPS) observations can be used to estimate the geocenter motion, but are subjected to large uncertainties and effects due to uneven distribution of GPS stations and high-degree aliasing errors. In this paper, uncertainties and effects on geocenter motion estimates from global GPS observations are investigated and assessed with different truncated degrees and selected GPS network distributions based on different plate motion models, including NUVEL-1A, MORVEL56 and ITRF08. Results show that the selected GPS stations have no big effects on geocenter motion estimates based on different plate motion models, while large uncertainties are found at annual and semi-annual components when using different truncated degrees. Correlations of geocenter motion estimates from selected GPS networks with GRACE and SLR are better with truncated degree 3, and higher truncated degrees will degrade geocenter estimates. Smaller RMS also shows better results with the truncated degree 3 and the NUVEL1A has the worse results because more GPS sites are eliminated. For annual signal with truncated degree 3, four GPS strategies can reduce annual amplitudes by about 29.2% in X, 5.6% in Y, and 27.9% in Z with respect to truncated degree 1. Annual phases of all GPS solutions from MORVEL56 and ITRF08 are almost close to the GRACE solution with truncated degrees from 3 to 10, while the semi-annual signals are relatively weaker for all cases.     

Creation of the new industry-standard space test of laser retroreflectors for the GNSS and LAGEOS

We built a new experimental apparatus (the “Satellite/lunar laser ranging Characterization Facility”, SCF) and created a new test procedure (the SCF-Test) to characterize and model the detailed thermal behavior and the optical performance of cube corner laser retroreflectors in space for industrial and scientific applications. The primary goal of these innovative tools is to provide critical design and diagnostic capabilities for Satellites Laser Ranging (SLR) to Galileo and other GNSS (Global Navigation Satellite System) constellations. The capability will allow us to optimize the design of GNSS laser retroreflector payloads to maximize ranging efficiency, to improve signal-to-noise conditions in daylight and to provide pre-launch validation of retroreflector performance under laboratory-simulated space conditions. Implementation of new retroreflector designs being studied will help to improve GNSS orbits, which will then increase the accuracy, stability, and distribution of the International Terrestrial Reference Frame (ITRF), to provide better definition of the geocenter (origin) and the scale (length unit).     

航天测控系统卫星鉴定技术研究

针对基于卫星的航天测控系统精度鉴定技术开展了深入的分析和研究,提出了较为全面的卫星鉴定的思路和技术途径。在时序比对统计方法的基础上对利用卫星进行系统误差分离的方法展开了深入研究,并将比对估计统计方法和"EMBET"自鉴定方法有机结合起来。通过可行性分析和工程应用充分验证了利用卫星对航天测控系统进行精度鉴定的可行性、正确性和优越性。     

10 Years of LAGEOS-1 and 15 years of LAGEOS-2 spin period determination from SLR data

Satellite Laser Ranging (SLR) stations measure distance to the satellites equipped with Corner Cube Reflectors (CCRs). These range measurements contain information about spin parameters of the spacecraft. In this paper we present results of spin period determination of two passive satellites from SLR data only: 10 years of LAGEOS-1 (10426 values), and 15 years of LAGEOS-2 (15580 values). The measurements have been made by standard 10 Hz SLR systems and the first 2 kHz SLR system from Graz (Austria). The obtained data allowed calculation of the initial spin period of the satellites: 0.61 s for LAGEOS-1 and 0.906 s for LAGEOS-2. Long time series of the spin period values show that the satellite’s slowing down rate is not constant but is oscillating with a period of 846 days for LAGEOS-1 and 578 days for LAGEOS-2. The results presented here definitely prove that the SLR is a very efficient technique able to measure spin period of the geodetic satellites.     

Design and experiment of onboard laser time transfer in Chinese Beidou navigation satellites

High-precision time synchronization between satellites and ground stations plays the vital role in satellite navigation system. Laser time transfer (LTT) technology is widely recognized as the highest accuracy way to achieve time synchronization derived from satellite laser ranging (SLR) technology. Onboard LTT payload has been designed and developed by Shanghai Astronomical Observatory, and successfully applied to Chinese Beidou navigation satellites. By using the SLR system, with strictly controlling laser firing time and developing LTT data processing system on ground, the high precise onboard laser time transfer experiment has been first performed for satellite navigation system in the world. The clock difference and relative frequency difference between the ground hydrogen maser and space rubidium clocks have been obtained, with the precision of approximately 300 ps and relative frequency stability of 10E−14. This article describes the development of onboard LTT payload, introduces the principle, system composition, applications and LTT measuring results for Chinese satellite navigation system.     

TLE数据误差与基于TLE数据的交会预报分析

目前普遍使用TLE数据进行在轨物体的危险交会预报. TLE数据误差不仅会影响交会预报的准确性, 还是计算碰撞概率的必要参数, 因此, 只有准确估计TLE数据误差, 才能得到可信的碰撞概率数值. 本文采用两种方法, 即TLE数据自比和与高精度轨道预报数据相比较的方法, 计算TLE数据误差, 并分别利用TLE数据和高精度数据计算同一交会, 比较两种数据预报的交会结果差异. 结果表明, 采用TLE根数自比方法的计算误差偏小, 而使用精轨数据作为校准数据所得到的TLE误差更接近真实误差, 计算碰撞概率更为合理, 有利于减少虚警.      

Observation level combination of SLR and VLBI with c5++: A case study for TIGO

A multi-technique space geodetic analysis software named c5++ has been developed and allows one to combine data on the observation level. With SLR and VLBI modules being ready and tested, this software has been used to compute coordinate time series of the geodetic fundamental station TIGO, located near Concepción, Chile. It can be shown that the combination of space geodetic data on the observation level leads to a significant improvement of station position repeatability, which is an important measure for the stability of a station in the terrestrial reference frame. Moreover, it could be demonstrated that the geophysical signal of the post-seismic tectonic plate movement is usually more complete than detected by any of the two single-technique solutions. In addition, it has been confirmed that so-called nuisance parameters, which are relying on data from a single technique, are not biased when combing observations from different space geodetic techniques.     

北斗在轨卫星广播星历精度分析

为分析北斗广播星历的精度,采用激光测距资料和精密星历作为参考进行分析。由于没有提供BDS-3试验卫星精密星历,本文设计了3天弧段的DBS-3试验卫星精密定轨试验,解算的轨道精度约为50 cm,钟差精度约为2 ns。之后联合国际GNSS监测评估系统iGMAS发布的事后BDS-2精密星历,对BDS-3/BDS-2广播星历轨道、钟差精度进行分析。为准确评估广播星历轨道精度,还采用SLR观测数据作为外部检核手段分析北斗在轨卫星广播星历轨道精度。统计了广播星历轨道误差的1D RMS和钟差误差的STD,结果表明：多数钟差精度优于 10 ns ,轨道精度优于5 m。另外为分析广播星历卫星钟的时频性能,计算了在轨卫星钟差的频率稳定度、漂移率和准确度,试验结果表明：BDS-3试验卫星各项性能指标普遍优于BDS-2,频率准确度、频率漂移率和频率稳定性指标计算结果显示BDS-3卫星相对于BDS-2卫星分别提升了42.8%,22.5%,9.5%。