燃烧条件下药柱脱粘扩展的设计

利用有限元方法分析了不同条件下药柱脱粘部位的应力状况,设计了复合固体推进剂燃烧条件下的脱粘扩展试件,通过X射线实时成像系统纪录了燃烧过程。结果表明:要形成脱粘扩展,脱粘部位装药要有大的拉伸变形;当药柱在点火冲击作用下,脱粘产生比较大的拉伸变形,且变形达到脱粘扩展的临界变形量时,就会出现脱粘扩展。     

铝粉颗粒燃烧产物的平均弥散度计算研究

采用金属颗粒的扩散燃烧模型和燃烧产物的均匀多相成核理论，对铝粉燃烧所形成的Al2O3平均弥散度进行了计算研究。根据计算结果，对铝粉燃烧区域中的温度、燃烧产物的过饱和度及其凝聚成核速率的变化规律进行了分析讨论。并研究了环境因素对上述多数和铝粉燃烧产物平均弥散度的影响。     

高陡度光学非球面高效制造的探讨

分析了计算机控制光学表面成形法、计算机控制应力盘抛光、磁流变抛光制造光学非球面元件的几项先进技术,探讨了光学元件的高速、高效加工,提出了高陡度光学非球面的固着磨料研磨加工。     

少烟推进剂中新型复合多功能添加剂研究

利用多种实验手段，考察了四种新型复合多功能添加剂对ＡＰ／ＲＤＸ／ＡＬ／ＨＴＰＢ少烟复合推进剂力学性能，燃烧性能，热分解性能和工艺性能的影响。实验及分析证实，Ｃ－２和Ｃ－１两种复合多功能添加剂能显著改善少烟复合推进剂的力学性能，尤其是低温力学性能，同时还能提高推进剂燃速，是两种良好的多功能添加剂。     

高压不稳定环境中的燃料液滴蒸发

对燃料液滴在高压不稳定环境中的蒸发进行了研究，着重讨论了气相介质压力振荡对液滴蒸发特性的影响，计算了Ｃ１２Ｈ２６液滴在Ｎ２介质中蒸发时的蒸发速率、滴温和无因次滴径随时间的变化。结果表明：（１）蒸发速率、滴温发生相同频率的振荡，相位滞后分别为π和π／２；（２）压力振荡使蒸发速率平均值增大，液滴生存时间减少；（３）在不定常加热阶段压力振荡影响很小。     

发动机装药应变测试方法实验研究

介绍了用弓形传感器测试固体发动机模拟器的装药在硫化降温过程中的应变情况，并将结果与理论计算进行了对比，分析表明：实验结果与计算结果和定性分析结果附合良好，虽然在实验过程中温度控制不够严格，两种结果有一定的误差，但当温度达到基本平衡时，两种结果吻合很好。     

燃烧室头部进气规律对煤粉燃烧效率的影响

用实验方法研究了火焰筒式煤粉燃烧室头部进气规律对燃烧效率的影响。通过对6种结构的头部配气方案的分析比较,得出了煤粉燃烧室合理的头部配气方案,为今后煤粉燃烧室的设计和工作状态的选择提供了重要的实验依据。     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.