多级轴流压气机出口级转子扩张通道优化设计

为提高多级轴流压气机后面级气动性能,针对某多级轴流压气机出口级转子搭建了基于遗传算法和神经网络代理模型的扩张通道压气机优化设计平台,并对其进行扩张通道优化设计研究。根据优化得到的数据库分析了各设计参数对效率和裕度的影响规律。在优化所得解集中选择了两个扩张通道设计方案,探究了其对效率和裕度的影响规律和机制。结果表明:扩张通道设计可使出口级转子在设计流量点的负荷提高12.1%、效率提高1.28%,同时获得12.50%的裕度改善量。基于当地熵产率损失模型可得,扩张通道转子相较于原型转子,其上下端壁损失增加,叶型损失减小。扩张通道转子近失速点堵塞系数变小是其裕度提升的主要原因。      

Cost Engineering – The new paradigm for space launch vehicle design

The paper describes the basic definition and application of 'Cost Engineering' which means to design a vehicle system for minimum development cost and/or for minimum operations cost. This is important now and for the future since space transportation has become primarily a commercial business in contrast to the past where it has been mainly a subject of military power and national prestige. Several examples are presented for minimum-cost space launch vehicle configurations, such as increasing vehicle size and/or the use of less efficient rocket engines in order to reduce development and operations cost. Further a cost comparison is presented on single-stage (SSTO)-vehicles vs. two-stage launchers which shows that SSTOs have lower development and operations cost although they are larger, respectively have a higher lift-off mass than two-stage vehicles with the same performance. The design of a space tourism-dedicated launch vehicle is an extreme challenge for a cost-engineered vehicle design in order to achieve cost per seat not higher than $50,000. Finally an outlook is presented on the different options for manned Earth-to-Moon transportation modes and vehicles – another most important application of 'cost engineering', taking into account the large cost of such a future venture.     

导弹级间热分离动态特性仿真研究

级间热分离具有改善和提高继续飞行级的稳定性和入轨精度而被固体弹道式导弹广泛采用。以某导弹级间热分离为研究背景建立了分离动态方程,基于ADAMS平台进行了参数化模型的分离动力学仿真分析,协调、选择级间分离的各种参数,阐述了级间热分离需考虑的主要问题。研究表明,虚拟现实技术是实现合理选定导弹级间热分离时序的有效途径,不仅可提高分离系统设计、分析和校核过程中的条理化和清晰度,而且为实现分离系统设计与仿真的精确化、可视化、组合化和通用化提供了较好的基础。     

Physiologic and metabolic responses of wheat seedlings to elevated and super-elevated carbon dioxide

The metabolic consequence of suboptimal (400 μmol mol⁻¹ or ppm), near-optimal (1500 ppm) and supra-optimal (10,000 ppm) atmospheric carbon dioxide concentrations [CO₂] was investigated in an attempt to reveal plausible underlying mechanisms for the differential physiological and developmental responses to increasing [CO₂]. Both non-targeted and targeted metabolite profiling by GC–MS and LC–MS were employed to examine primary and secondary metabolites in wheat (Triticum aestivum, cv Yocoro rojo) continuously exposed to these [CO₂] levels for 14, 21 and 28 days. Metabolite profile was altered by both [CO₂] and physiological age. In general, plants grown under high [CO₂] exhibited a metabolite profile characteristic of older plants under ambient CO₂. Elevated [CO₂] resulted in higher levels of phosphorylated sugar intermediates, though no clear trend in the content of reducing sugars was observed. Transient starch content was enhanced by increasing [CO₂] to a much greater extent at 10,000 ppm CO₂ than at 1500 ppm CO₂. The percentage increase of starch content resulting from CO₂ enrichment declined as plants develope. In contrast, elevated [CO₂] promoted the accumulation of secondary metabolites (flavonoids) progressively to a greater extent as plants became mature. Elevated [CO₂] to 1500 ppm induced a higher initial growth rate, while super-elevated [CO₂] appeared to negate such initial growth promotion. However, after 4 weeks, there was no difference in vegetative growth between 1500 and 10,000 ppm CO₂-grown plants, both elevated CO₂ levels resulted in an overall 25% increase in biomass over the control plants. More interestingly, elevated atmospheric [CO₂] reduced evapotranspiration rate (ET), but further increase to the supra-optimal level resulted in increased ET (a reversed trend), i.e. ET at 1500 ppm < ET at 10,000 ppm < ET at 400 ppm. The differential effect of elevated and super-elevated CO₂ on plants was further reflected in the nitrogen dynamics. These results provide the potential metabolic basis for the differential productivity and stomatal function of plants grown under elevated and super-elevated CO₂ levels.     

当前经济增长的周期性、阶段性特征及政策思路

根据经济周期谷底的特性以及中美两国经济紧密关联和经济周期越来越契合的规律,可以印证2009年就是新一轮经济周期的谷底,由此可以断定当前处于复苏阶段.然而近三年来我国经济增速持续下滑至谷底以下,这一反常现象是由于经济短周期冲高回落与经济增长阶段转换相互叠加造成的.河南省与全国经济周期高度一致,时滞半年左右.在高速经济增长阶段河南省潜在经济增长率比全国高出2个百分点,中高速阶段高出1.5个百分点.河南省近几年经济增速深度下滑,其关键原因是投资增速下滑,其根本原因是结构升级缓慢.未来河南经济要摆脱持续下行趋势,保持经济中高速增长,应坚持调结构、扩投资、促改革的政策思路,“调结构”是根本,“扩投资”是基础,“促改革”是保障.     

推进剂重定位过程仿真与分析

为了拓展低温上面级滑行时间，满足深空探测任务需求以及提升运载火箭任务适应性，中国未来型号研制将采用间歇沉底的方案，其主要难点是推进剂重定位过程的研究。本文针对目前重定位仿真多为二维CFD仿真且不能准确合理地预示气泡逸出过程的问题，提出一种基于Flow-3D的三维CFD仿真方法。该方法采用卷气体积与液体体积之比（卷气率）预示气泡逸出过程，比以往采用气泡粒子数预示气泡逸出过程的方法更为合理准确。重定位及气泡逸出过程的仿真结果与半人马座落塔试验的结果具有一致性，捕捉到了重定位过程所有特征流型，且对应时刻误差不超过10%。仿真结果表明间歇沉底推进剂管理方案的可行性，并确定了某低温上面级的相关设计参数。     

可重复启动低温上面级的推进剂管理装置研究

回顾了低温上面级推进剂管理技术的国内外研究现状,分析了上面级微重力环境中低温推进剂管理涉及的液体蓄留、气液分离和局部热控等关键技术。开展了液氧贮箱推进剂管理装置的方案设计,并试验验证了可填充蓄液器的填充和下层板网的指定路径排气等关键功能,确认了方案的可行性。     

Secondary instability of separated shear layers

The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to become turbulent flow. The transition process is usually initiated by flow instabilities—a primary instability stage followed by a secondary instability stage. This forms a rational framework for the early stage of a transition process and it is crucially important to understand the physics of instabilities leading to turbulence. This article reviews the results of studies on secondary instability of separated shear layers in separation bubbles and summaries the current status of our understanding in this area.     

LaBr3(Ce)元件破损在线监测关键核素确定及效率校准

常用的元件破损在线监测方法受外在因素影响较大，以γ能谱中关键裂变产物核素比活度进行在线定量分析是一种可靠的元件破损监测方法。针对新型LaBr₃(Ce)元件破损监测仪，设计了元件破损模拟实验，对逸出的裂变产物采用HPGe和LaBr₃(Ce)探测器进行了对比测量。通过不同冷却时间γ能谱的核素分析，确定了¹³⁵Xe，⁸⁸Kr，¹³⁸Xe，⁸⁸Rb，¹³⁸Cs等可作为LaBr₃(Ce)元件破损γ能谱监测的关键核素。同时，制备了覆盖能量范围(250～2 400)keV，含⁶⁰Co，¹³⁷Cs，¹³³Ba；²⁴¹Am，¹⁵²Eu；¹⁰⁹Cd，⁸⁸Y，⁵⁷Co及²⁴Na的4组放射性标准溶液，在建立的效率校准系统上，校准了LaBr₃(Ce)在线监测仪的效率。在反应堆一次异常情况分析中，已校准的LaBr₃(Ce)元件破损监测仪对关键核素的现场分析结果与HPGe的取样分析结果一致，表明效率校准结果准确，校准方法可靠。     

分级时效工艺对1420Al—Li合金组织与性能的影响

研究了分级时效工艺对1420Al-Li合金组织与性能的影响，试验结果表明：经70℃／12h＋120℃／4－10h工艺分级时效处理可使1420Al-Li合金的综合力学性能得到显著的提高；分级时效工艺使1420Al-Li合金析出的δ‘相粒子分布均匀、尺寸细小。