A multi-parameter model of heat treatment process for soft magnetic materials on performance of HSERs

Material properties play an important role in the performance of electromagnetic mechanism. For an aeronautic Hermetically-Sealed Electromagnetic Relay (HSER), more than 50% parts are made of soft magnetic materials. Therefore, the performance of soft magnetic materials directly determines the static and dynamic characteristics of the HSER. Based on the theory of crystal recrystallization, this paper analyzes cold extrusion and heat treatment in the processing of soft magnetic materials, simulates the grain change process of an armature at different heat treatment temperatures, establishes a correlation model of temperature, grain size, and magnetic energy, and verifies results by scanning electron microscopy. Results of heat treatment temperatures from 800 °C to 920 °C are obtained and compared. A sample soft magnetic material after heat treatment at different temperatures has the largest difference in the initial magnetization range, up to 22%. In order to verify the fluctuation of the overall output characteristics of an HSER caused by the difference between soft magnetic materials, a static and dynamic analysis model of a typical HSER is established, and the accuracy of the model is verified by a set of actual test system. The difference of dynamic characteristics under different heat treatment temperatures is nearly 3%.     

激光支持的脉冲等离子体推力器工作过程实验研究

为了加深对激光支持的脉冲等离子体推力器工作过程的认识，本文对有无陶瓷隔离板和不同初始电压下的激光支持的脉冲等离子体推力器进行了实验研究。利用放电伏安特性对比了放电特性参数和性能参数，然后利用结合窄带滤光镜的高速摄影技术揭示了性能差异背后的物理过程变化。结果表明，陶瓷隔离板可以有效避免放电电弧对工质的烧蚀，这可以抑制滞后烧蚀的产生，从而提高推力器的推进性能。对激光烧蚀产生的工质的电离和加速是在多次振荡放电过程中进行，而不像理想电流片模型那样只电离和加速一次。放电通道内工质的电离和加速效果最为显著的时间为放电的第2个半周期。随着初始电压的增加，单位放电能量产生的推进性能先增加后趋于平稳，然后继续增加。单位放电能量产生的推进性能在初始电压高于2050V后得到较大的提高，通过放电等离子体图像推测，这意味着附着等离子体电弧的存在对推力器性能的提高有重要影响。     

Ag/Ni/玻璃微珠填充硅橡胶性能

采用自制的导电填料Ag/Ni/玻璃微珠制备了导电硅橡胶,对其形貌进行了表征,对其导电性能、电磁屏蔽效能、力学性能进行了研究。结果表明,Ni的存在使Ag/Ni/玻璃微珠填充硅橡胶在低频的屏蔽效能有所增强,填充体积分数为56%时,导电硅橡胶导电性良好,10 kHz~6 GHz屏蔽效能达70.6~98.8 dB,力学性能良好。     

层状Ti3C2Tx/水性聚氨酯复合双层薄膜的制备及电磁屏蔽性能

采用交替真空抽滤制备Ti_3C_2T_x MXene/WPU复合双层薄膜,用扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征了微观形貌,X射线衍射仪(XRD)测试了晶体结构,通过矢量网络分析仪测试了电磁屏蔽性能。结果表明,可以通过超声离心制备出少层Ti_3C_2T_x;复合双层薄膜具有高韧性、高导电性以及优异的电磁屏蔽性能,表面电阻为3.57Ω;电磁屏蔽性能结果表明,MWPU_(3:1)的复合薄膜屏蔽性能为37.9 dB。在X波段与K波段,MWPU_(3:1)复合薄膜性能较为优异,且复合薄膜是吸收型电磁屏蔽材料。     

Comparison of electron density measurements from CSES and Swarm satellites with GNSS ionospheric tomography data

Electron density measurements obtained from China Seismo‐Electromagnetic Satellite (CSES) and Swarm-B can play an increasingly important role in the study of ionosphere above F2 peak height. This study presented a comprehensive comparison of electron density products obtained from Langmuir probe mounted on CSES and Swarm-B with ionospheric tomography for a whole year period of 2019. CSES was fully compared with Swarm-B on a global scale, including both absolute and relative differences, and a new index called NFI was developed to better quantify the similarity between two latitudinal profiles of electron density. CSES and Swarm-B were then compared with tomography respectively in four regions, roughly located in America, Europe, Australia and China. Results indicated that CSES data are consistent with Swarm-B, as NFI values exceed 0.6 for most of the analyses. Tomography and Swarm-B were found to have a good agreement as their biases are less than 0.2 × 10⁵ el/cm³ in general. For the comparison between CSES and tomography, the bias increased to around 0.6 × 10⁵ el/cm³ but the standard deviation changed slightly, validating the underestimation of electron density by CSES. The spatiotemporal comparisons of CSES and Swarm-B with tomography showed that: 1) the differences in electron density were relatively low in middle latitudes and increased rapidly in the regions of equatorial ionization anomaly; 2) Swarm-B has a better consistent with tomography than CSES, but both are capable of detecting ionosphere anomalies such as midlatitude arcs; and 3) CSES and Swarm-B both can capture the seasonal changes of electron density, while their values are basically smaller than those from tomography in Spring and Summer months.     

多层结构设计在吸波材料中的应用

简述了多层结构吸波材料设计的理论模型、设计原则及优化设计方法,从吸收剂材料的电磁特性方面总结了多层结构吸波材料的特点,详细论述了多层结构设计对吸波材料性能的影响,最后提出了多层吸波材料的技术难点和发展趋势。     

共沉淀法制备花状NiCo2O4及其吸波性能的研究

通过共沉淀法制备花状NiCo₂O₄吸波材料，利用XRD、FTIR、BET、XPS和SEM等方式表征了样品成分及形貌特征，将不同煅烧温度（300、400、500、600、700 ℃）的产物利用矢量网络分析仪通过同轴测试法模拟了不同厚度下的吸波性能。结果表明：400 ℃煅烧样品在反射损耗值、吸收带宽以及样品厚度都表现出较好的性能，当厚度为1.5 mm时，在14.32 GHz处吸波材料达到最大的吸收损耗值为-43.71 dB，有效吸收带宽为4.48 GHz （12.08~16.56 GHz），可以预见镍钴基吸波材料具有很大的潜力。     

全红外光激发里德堡原子微波电场测量

基于高激发里德堡原子的微波电场测量技术与传统金属天线相比有诸多优越性，是未来微波电场高精度测量的重要方案之一。采用全红外光激发里德堡原子的方案不再依赖复杂而昂贵的短波长激光器，大大减小了激光器系统的体积与能耗。在三红外光级联激发里德堡铷原子的过程中，发现了中间态对应的双光梯形电磁诱导透明光学参数对三光激发里德堡态电磁诱导吸收峰信噪比具有重要影响，因此采用光失谐方法能很好地优化三光EIA光谱。利用微波场下的Autler-Townes分裂效应和标准天线方法对微波喇叭天线发射的微波电场实现精确的校准，并以此为基础通过超外差接收技术成功探测到本地场与信号场所形成的拍频信号，得到了拍频光电信号与信号场强度之间的线性关系。最终通过实验噪声基底的噪声功率谱得到三红外光里德堡铷原子微波测量的极限灵敏度为37.5(5.5) nV·cm－1/Hz。采用三束红外光激发的方法为研制小型里德堡原子微波电场探测仪器奠定了物理基础。