侦察-攻击作战航空综合体效能模型分析

对侦察-攻击作战航空综合体的基本概念、组成和功能进行全面系统地阐述;并根据侦察-攻击作战航空综合体作战过程的特点,阐述了评估侦察-攻击作战航空综合体效能的数学模型,为进一步研究该类型作战航空综合体作战效能提供了一些帮助。     

再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

Mechanism of error propagation from the subdaily Universal Time model into the celestial pole offsets estimated by VLBI

Within the analysis of space geodetic observations, errors of the applied subdaily Earth rotation model can induce systematic effects in different estimated parameters. In this paper, we focus on the impact of the subdaily Universal Time (UT1) model on the celestial pole offsets (CPO) estimated from very long baseline interferometry (VLBI) observations. We provide a mechanism that describes the error propagation from the subdaily UT1 into the daily CPO.In typical 24-h VLBI sessions the observed quasars are well distributed over the sky. But the observations, if looked at from the Earth-fixed frame, are not homogeneously distributed. The amount of observations performed in different terrestrial directions shows an irregularity which can be roughly compared to the case where the observations are collected in only one Earth-fixed direction. This peculiarity leads to artefacts in VLBI solutions, producing a correlation between the subdaily variations in UT1 and the position of the celestial pole. As a result errors in diurnal terms of the subdaily UT1 model are partly compensated by the estimated CPO. We compute for each 24-h VLBI session from 1990 until 2011 the theoretical response of the CPO to an error in the subdaily UT1 by setting up a least-squares adjustment model and using as input the coordinates of the observed quasars and observation epochs. Then real observed response of the estimated CPO derived from the VLBI session solutions is compared to the predicted one. A very good agreement between the CPO values estimated from VLBI and the predicted values was achieved. The presented model of error propagation from the subdaily UT1 into the daily CPO allows to predict and explain the behaviour of CPO estimates of VLBI solutions computed with different subdaily Earth rotation models, what can be helpful for testing the accuracy of different subdaily tidal models.     

关于模糊逻辑系统及其建模函数的数学描述

模糊逻辑系统按真值化处理与推量规则导出最优系统数学表达式。在线性定常状态下,分别建立起连续与间断系统的数学模型,归纳出模糊控制的等效解法。并应用模糊数学算法,对一非线性实例绘制出双模控制框图。     

静止叶栅三维粘性数值模拟

应用Ｎ－ Ｓ方程压力修正算法和ｋ－ ε两方程湍流模型,对端弯叶片和基准（无端弯）叶片的平面叶栅进行了三维粘性数值模拟。在采用简单交错网格的情况下,通过对计算控制体通量的速度进行修正的方法解决了Ｎ－ Ｓ方程压力修法算中遇到的压力场和速度场呈锯齿状分布的问题。用实验测量值对本数值模拟方法的精度和可靠性进行了检验     

干扰因素对补燃式液体火箭发动机性能的影响

给出了描述补燃循环液体火箭发动机静态特性的非线性数学模型,用拟牛顿法求解各性能参数,分析了干扰因素对液体火箭发动机参数的影响,所得结论可用于发动机试验结果分析、发动机可靠性分析、发动机故障分析,也可用于揭示发动机参数随各种干扰因素的变化规律.      

飞机飞行载荷测量载荷方程的优选

介绍用应变计方法测量飞机飞行载荷的载荷方程,应用方差分析和下检验技术进行优选,逐次剔除无应电桥和多余电桥,经自动计算,得到仅会对某种载荷有显著贡献的少量电桥的最优载荷方程,供飞行试验测量飞机飞行载荷使用。算例结果表明,此方法获得最优载荷方程有效。     

面向产品建模的新一代实体造型技术研究

针对ＣＩＭ和并行工程的产品建模需要,探讨了实体造型的两种新途径。一种是用精确的ＮＵＲＢＳ曲面构造基本体素,实现曲面拼合运算;另一种是采用特征技术,将子形素贴合在父形素的连接面上,实现尺寸驱动的参数化设计,部分回避传统的拼合运算。     

低Weber数射流撞击雾化的数学模型

通过分析低Weber数无粘射流撞击形成液膜雾化的特征, 由质量守恒和动量守恒, 并借鉴前人的理论和实验结果, 推导出Taylor心形波作用下计算液膜厚度和形状的近似解析式, 数值计算结果与文献所给实验数据基本吻合一致。结合矩形喷孔形成的扇形液膜的破碎理论, 进一步计算了不同撞击角下雾化形成液滴尺寸的大小及分布。      

液体火箭发动机故障特性动态模拟

以某大型泵压式供应系统液体火箭发动机为研究对象, 建立了液体火箭发动机非线性动态数学模型。针对已发生过或可能出现的故障形式, 以阶跃形式输入, 进行了故障状态下动态特性模拟。数值方法用四阶定步长龙格-库塔方法发展而成的自适应变步长龙格-库塔法。计算结果表明, 所建模型较精确合理, 数值方法满足故障模拟的要求。该工作为故障模式提取、监控参数优化选择、基于模型的故障检测与诊断等发动机健康监控问题的研究奠定了基础。