Longitudinal distribution of thermospheric densities and ionization rates in the upper atmosphere of Mars at mid-latitude using MGS ACC data

The Accelerometer Experiment (ACC) onboard Mars Global Surveyor (MGS) measured 1600 density profiles in the upper atmosphere of Mars during aerobraking. These measurements reveal large-scale and small-scale structure in the thermosphere of Mars. Here, the measurements of mass density for 115 orbits (#P0670–P0789) from November 1 to 30, 1998, under spring equinox and medium solar activity conditions (average F_10.7 ∼ 137) during phase 2 of the aerobraking in the thermosphere of Mars at different altitudes and longitudes are presented for northern mid-latitude (17–42°N) in the dayside atmosphere using ACC onboard MGS. From these mass densities, the neutral densities of different gases are derived from their mixing ratios. Using these neutral densities, the longitudinal distribution of photoionization rates and photoelectron impact ionization rates are calculated at wavelength range 1–102.57 nm due to EUV and soft X-ray radiation under photochemical controlled region using Analytical Yield Spectrum approach (AYS). These conditions are appropriate for MGS Phase 2 aerobraking period from which the accelerometer data is used. Under the photochemical equilibrium condition, the electron density near the peak varies as the square root of the total peak ionization rate. Using this fact, an attempt is being made to estimate the mean primary and secondary peak electron density by averaging the longitudinal variations of total peak ionization rates in the northern mid-latitude (17–42°N) ionosphere of Mars, as there is no radio science measurement at this latitude region by MGS.     

应用BP神经网络针对高通量质子事件的通量数值预报

质子事件的爆发与太阳软X射线辐射有着很强的相关性,利用GOES卫星的1～8 (A)波段和0.5～4 (A)波段的软X射线数据,选取一些特征参量验证该相关性并应用到质子事件短期预报中.在当前质子事件传输物理机制不完全明确的情况下,在现有的预报质子事件有无的模型基础上,利用BP神经网络,根据软X射线通量水平等预测事件质子峰值通量水平,再对训练后的网络进行检验,检验预测所得结果与实际探测值误差小于一个量级,具备一定实用意义.      

Feedrate scheduling method for constant peak cutting force in five-axis flank milling process

It is extremely important to select appropriate feedrates for the stable machining of parts with ruled surface in modern aviation industrial applications. However, the current studies take too much time to achieve this goal. Therefore, this paper presents an efficient feedrate optimization method for constant peak cutting force in five-axis flank milling process. The solution method of the instantaneous undeformed chip thickness (IUCT) is proposed using least squares theory with the cutter entry angle and feedrate as variables. Based on this method, an explicit analytical expression of the peak cutting force for each cutting point is established. Furthermore, a feedrate scheduling method is developed to quickly solve the appropriate feedrate under constant peak cutting force. To verify the proposed IUCT model, the fitting IUCT is compared with the accuracy data at different feedrates. Additionally, some experiments of five-axis flank milling are conducted to demonstrate the effectiveness of the peak force model and the feedrate scheduling method. And the surface roughness before and after feedrate scheduling is detected. The results show that the proposed feedrate scheduling method can quickly adjust the feedrate and ensure constant peak force during machining. At the same time, the surface quality is kept at a high level.     

脉冲爆震火箭发动机高频实验研究

为了研究脉冲爆震发动机的高频工作特性,以航空煤油和压缩氧气为推进剂,采用爆震增强装置,增大推进剂供给压力以及增大电磁阀控制气压力等措施,在脉冲爆震火箭发动机模型上进行了实验,成功获得45Hz时的爆震压力波形。实验结果表明,频率增高,爆震波峰值压力下降,有利于加速缓燃向爆震的转变(Defla-gration to Detonation Transition,DDT)。当爆震充分发展时,爆震波波速基本不变,峰值压力上升时间趋于定值。工作频率为45 Hz时,爆震波峰值的压力为3.2 MPa,爆震波的波速为1 715.5m/s。     

Linkage of the ionospheric peak electron density and height deduced from the topside sounding data

Topside sounding electron density profiles are analyzed to explore interrelations of the F2 layer critical frequency and the peak height for a representative set of conditions provided by ISIS1, ISIS2, IK19 and Cosmos-1809 satellites for the period of 1969–1987. The foF2 and hmF2 are delivered with exponential extrapolation of electron density profile to zero of its 1st derivative. It is shown that the linear regression exists between foF2 and hmF2 under different conditions. The linkage between the two parameters amended to the empirical model of the peak height [Gulyaeva, T.L., Bradley, P.A., Stanislawska, I., Juchnikowski, G. Towards a new reference model of hmF2 for IRI. Adv. Space Res. 42, 666–672, doi:10.1016/j.asr.2008.02.021, 2008] results in an empirical model of the both foF2 and hmF2 expressed by superposition of functions in terms of local-time, season, geodetic longitude, modified dip latitude and solar activity. For the solar activity we use a proxy Fsp index averaged from the mean solar radio flux F10.7s for the past 81 days (3 solar rotations) and F10.7 value for 1 day prior the day of observation. Impact of geomagnetic activity is not discernible with the topside sounding data due to mixed positive and negative storm-time effects. Appreciable differences have been revealed between IRI-CCIR predictions and outcome of the new model which might be attributed to the different techniques of the peak electron density and height derivation, different epochs and different global distribution of the source data as well as the different mathematical functions involved in the maps and the model presentation.     

基于偏置角动量的欠驱动航天器姿态保持控制

对有扰情况下欠驱动航天器三轴姿态保持控制问题进行了研究,提出一种基于俯仰偏置动量轮和滚动轴推力器的姿态保持控制方法。该方法基于偏置动量航天器滚动-俯仰轴耦合的原理实现,避免了欠驱动零动量航天器平衡点附近欠驱动轴耦合弱的问题;将航天器的姿态运动分为长周期运动和短周期运动,用极点配置方法进行控制律设计,给出保证系统稳定的参数选取范围,求出了系统稳态误差。最后,通过数值仿真验证了所设计的控制器不但能快速消除初始姿态偏差,而且能抵抗外干扰将航天器姿态保持在平衡点附近。     

宽带数据链路中的帧同步技术研究

文中对宽带数据链路中的帧同步技术进行了研究。采用QPSK调制解调时,数据帧中同步字采用两个重复的符号长度为16的恒幅零自相关(CAZAC)复序列,通过检测两个CAZAC同步字来确认系统处于失步或同步状态。分析结果表明,基于本文给出的同步字的数据帧格式在进行帧同步检测时,在引入帧同步校核系数(α=2)和帧同步保护系数(β=8)后,平均同步捕获时间很短;且一旦系统处于同步状态,其发生失步的概率极小。     

一种实现太阳阵峰值功率跟踪的智能控制方法

首先讨论了峰值功率跟踪的一般概念及原理,然后提出了一种采用模糊自寻优智能控制原理实现太阳阵峰值功率跟踪的具体方法。该方法先根据模糊自寻优控制器的输出计算太阳阵电压的参考值,然后将此参考值与太阳阵的实际输出电压相比较,得出的误差信号去控制脉宽调制输出的占空比,以使太阳阵的输出电压达到此参考值。由于参考电压值的算法充分考虑了太阳阵峰值功率点的逼近问题,因此,上述过程多次进行,就能使得太阳阵的工作点最终到达峰值功率点。     

某型机供气分配系统故障分析与设计改进

本文对某型机空调供气分配系统出现的问题进行了研究，通过运用流体仿真手段对供气分配系统的压力损失、温度、流量和流速进行计算分析，并与空调系统性能试验结果进行对比分析，选择合理的驾驶舱和客舱分配比例，最终确定了空气分配系统的改进方案，改进后的供气分配系统操作简单，维护方便，经试验测试性能满足空调系统设计要求。     

基于神经网络自适应动态逆的结冰飞机飞行安全边界保护方法

考虑到飞机带冰飞行的安全问题，对结冰飞机进行安全边界保护成为一种有效的解决手段。基于神经网络自适应动态逆跟踪性能好、鲁棒性强的优点，提出了以安全关键飞行参数限制值作为神经网络自适应动态逆的输入，获取可用舵面偏转角的边界保护方法。建立了飞机本体动力学模型，采用高精度的数值模拟方法获得结冰数据库。设计了神经网络自适应动态逆控制律，通过在动态逆环节引入单隐层神经网络，对不确定性逆误差进行自适应补偿，增强了控制系统的鲁棒性。以俯仰姿态保持模式为例设计了结冰飞行闭环安全边界保护系统。以结冰飞机最小平飞速度的估算值作为飞机最低飞行速度，设计自动油门控制系统，实现对飞行速度的保护。通过仿真验证了设计的控制律具有较强的鲁棒性。对结冰严重程度线性增加情形下飞机状态参数的动态响应进行了分析。仿真结果表明，所设计的结冰边界保护系统，能够实现飞机在容冰飞行过程中对安全关键参数如迎角、飞行速度的实时保护。