裁剪曲面的参数线加工算法研究

结合开发国产化软件的实践，详细论述了ＣＡＤ／ＣＡＭ技术中有关裁剪曲面的描述及加工自动编程算法的研究。从曲面造型及加工编程的通用性角度出发，将曲面的三维几何信息映射到二维参数域上，用二维拓扑信息环来描述裁剪曲面，把各种裁剪曲面的加工编程统一为一种具有拓扑信息环的广义曲面加工编程。同时，采用环形刀计算刀位信息，可方便地推广至球头刀或平底刀的加工编程。根据预先设定的残留高度及插补误差，在编程中对刀切点和刀位点的计算进行有效控制，保证了加工编程的精度要求。从而用较简单的方法实现了对任意裁剪曲面的加工自动编程     

微机控制梳棉机变频调速系统

本文介绍一种用于纺织机械——梳棉机的感应电机变频调速系统。变频调速器由MCS—51系列单片机控制。文章简要介绍了微机控制系统的硬件结构以及采用气隙磁通轨迹控制法产生三相脉宽调制波的基本原理,还介绍了两台电机速度跟踪的要求和实现方法。     

大厚度比零件（外侧）和波纹管（内侧）的缝焊研究

某重点型号波纹管组合件的设计要求是缝焊，对照以往产品的结构，比较明显的情况是波纹管在零件的内侧。零件的厚度是3mm，波纹管的厚度是0.1mm，零件与波纹管的厚度比比较大。波纹管在零件的内侧会产生一个问题：波纹管在焊接过程中会逐渐收缩，到最后与零件之间产生间隙，导致局部形不成焊缝。研究通过减小车配间隙,增加冷却手段、滚轮厚度和压力等措施来实现大厚度比的零件和波纹管之间的缝焊。     

Electrochemical trepanning with uniform electrolyte flow around the entire blade profile

In the traditional machining process for diffusers, blades are easily deformed, and methods suffer from high tool wear and low efficiency. Electrochemical machining(ECM) possesses unique advantages when applied to these difficult-to-machine materials. In the ECM process, theflow field plays a crucial role. Here, an electrolyte flow mode that supplies uniform flow around the entire blade profile was adopted for electrochemical trepanning of diffusers. Various flow rates were employed to obtain the optimal flow field. Simulations were conducted using ANSYS software, and results indicated that increasing the flow rate substantially afforded a more uniform flowfield. A series of experiments was then performed, and results revealed that increasing the flow rate greatly improved both the machining efficiency and the surface quality of the diffusers. The maximum feeding rate of the cathode reached 4 mm/min, the blade taper of the concave part decreased to 0.02, and the blade roughness was reduced to 1.216 lm. The results of this study demonstrated the high feasibility of this method and its potential for machining other complex components for engineering applications.     

飞机数字化装配系统中机身交点孔加工方法研究

针对传统交点孔加工方法加工精度低且存在回弹变形的问题,设计了一种满足飞机大部件数字化装配要求的机身交点孔精加工方法,根据交点孔的加工特性完成了机身定位与固持、数控加工中心定位以及加工工艺的总体设计,确定了交点孔加工程序原点的计算方法和编程原则,最后通过交点孔试切加工试验验证了加工方法的可行性。     

低温磨料气射流加工PDMS实验研究

通过自研的低温磨料气射流加工装置进行低温磨料气射流加工聚二甲基硅氧烷(polydimethylsiloxane,PDMS)实验研究,分析了加工时间、加工距离、冲蚀角度和磨料粒径对冲蚀率、孔深和孔横截面形貌的影响。结果表明:随着加工时间的增加,冲蚀率先增大后减小,在第1阶段加工过程中,孔深与加工时间大致呈线性关系,增加加工时间还可使孔底部变平整;存在一个最佳加工距离使孔深最大,当加工距离大于最大加工距离时,孔深将随着加工距离的增加而急剧下降,孔的锥度随着加工距离的增大而增大;当冲蚀角度处于30°～60°之间时,冲蚀率最大,随着冲蚀角度的增加,孔的形状逐步由椭圆形变成圆形;存在一个最佳磨料粒径,使冲蚀率和孔深达到最大;当冲蚀角度小于90°时,低温磨料气射流加工PDMS材料去除机理为塑性去除和脆性去除的结合。     

精密导电滑环表面微槽车削性能

采用超精密车削精密导电滑环导电环的方法,保证了精密导电滑环绝缘环与导电环的同轴度、环间距,使绝缘微槽变形量低于0.10 mm。建立了精密导电滑环的切槽模型,利用仿真分析讨论了主轴转速、进给速率、刀具前角和切削深度对微槽变形量的影响,并对模型进行了试验验证。结果表明:滑环微槽侧面变形量随主轴转速的增大而变大,当转速达到700 r/min时,变形量达到了0.10 mm,超出了滑环的精度要求;滑环微槽变形量随机床进给速率的增大而变大,当进给速率达到1.5 mm/min时,变形量超出了滑环的精度要求;滑环微槽变形量随着前角的增大而减小;滑环微槽变形量随切削深度的增大而变大,切削深度低于0.2 mm时,滑环变形量微乎其微。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

提高某铝合金薄壁深孔零件加工质量研究

通过分析某铝合金薄壁深孔零件在加工过程中存在的问题基础上,采用了拉镗拉铰加工内孔,再以轴向定位夹紧的方式加工外形的思路,该方法保证了零件加工精度,解决了该铝合金薄壁深孔零件的加工问题,完全满足生产实际需要,质量稳定可靠,可为类似零件加工提供参考。     

S试件几何形状定义与特性分析

S试件是用于综合检测五轴数控铣床动态加工精度的检测试件,目前已申请纳入国际标准ISO 10791-7标准组作为附加测试件。S试件的型面由两个直纹面构成,但S试件草案中并未对S形直纹面的参数化方式进行详细指定,因而导致S试件的几何形状表达方式不唯一,不同的型面几何定义对试件的检测特性有重要影响。针对以上问题,本文给出了Nurbs参数和等弧长两种典型的S试件直纹面定义方法,对比分析了两种直纹面的扭曲角变化及侧铣原理性误差等特性,并根据分析结果选取Nurbs参数作为S试件直纹面定义方式,从原理上完善了S试件的几何定义,有利于S试件标准的推广。