可变构型复合柔性结构航天器动力学建模研究

针对中心刚体加复合柔性结构类航天器采用混合坐标法和子结构模态综合法，建立了可变构型复合柔性结构航天器低阶动力学模型。获得的柔性动力学方程及其各类耦合系数矩阵，适用于全星级可变构型系统和部件级复合柔性附件系统的控制系统设计与仿真，该模型具有阶数低和工程实用的特点。     

Numerical analysis for impacts of nozzle end-clearances on aerodynamic performance and forced response in a VNT turbine

It has been well known that nozzle end-clearances in a Variable Nozzle Turbine (VNT) are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle end-clearances remain the same, varying nozzle end-clearances’ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress. Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances’ distribution.     

A simulation study on the mode conversion process from slow Z-mode to LO mode by the tunneling effect and variations of beaming angle

For a particular angle of incidence wave, it is possible for a slow Z-mode wave incident on an inhomogeneous plasma slab to be converted into an LO mode wave. But for another wave normal angle of the incident wave, it has been considered impossible, since an evanescence region exists between two mode branches. In this case we expect that the mode conversion takes place through the tunneling effect. We investigate the effect of the spatial scale of the density gradient on the mode conversion efficiency in an inhomogeneous plasma where the mode conversion can occur only by the tunneling effect. We use the computer simulation solving Maxwell’s equations and the motion of a cold electron fluid. By considering the steepness of the density gradient, the simulation results show the efficient mode conversion could be expected even in the case that the mismatch of the refractive indexes prevents the close coupling of plasma waves. Also, we show for these cases the beaming angle does not correspond to Jones’ formula. This effect leads to the angles larger and smaller than the angle estimated by the formula. This type of mode conversion process becomes important in a case where the different plasmas form a discontinuity at their contact boundary.     

A hybrid lattice Boltzmann flux solver for integrated hypersonic fluid-thermal-structural analysis

In this paper, a hybrid Lattice Boltzmann Flux Solver (LBFS) with an improved switch function is proposed for simulation of integrated hypersonic fluid-thermal-structural problems. In the solver, the macroscopic Navier–Stokes equations and structural heat transfer equation are discretized by the finite volume method, and the numerical fluxes at the cell interface are reconstructed by the local solution of the Boltzmann equation. To compute the numerical fluxes, two equilibrium distribution functions are introduced. One is the D1Q4 discrete velocity model for calculating the inviscid flux across the cell interface of Navier–Stokes equations, and the other is the D2Q4 model for evaluating the flux of structural energy equation. In this work, a new dual thermal resistance model is proposed to calculate the thermal properties at the fluid–solid interface. The accuracy and stability of the present hybrid solver are validated by simulating several numerical examples, including the fluid-thermal-structural problem of cylindrical leading edge. Numerical results show that the present solver can accurately predict the thermal properties of hypersonic fluid-thermal-structural problems and has the great potential for solving fluid-thermal-structural problems of long-endurance high-speed vehicles.     

基于三维有限元的火箭模态振型斜率预示方法研究

振型斜率火箭是姿控系统设计的重要参数,对飞行任务的可靠性与安全性有着至关重要的作用。依据全箭动特性的测量原理及参数定义,结合三维有限元建模方法和模型修正技术,全面考虑了速率陀螺、惯组安装位置处的局部刚度对振型和振型斜率的影响,建立了基于局部细节精细化建模的全箭模态振型斜率预示方法,并总结了3种不同的振型斜率提取方法,提高了振型斜率的预示精度。同时提供了三维模型振型一维化的方法,解决了使用三维有限元模型计算弹性运动方程式系数的难题。     

Applying fuzzy bi-dimensional scenario-based model to the assessment of Mars mission architecture scenarios

Sending man to Mars has been a long-held dream of humankind. NASA plans human planetary explorations using approaches that are technically feasible, have reasonable risks and have relatively low costs. This study presents a novel Multi-Attribute Decision Making (MADM) model for evaluating a range of potential mission scenarios for the human exploration of Mars. The three alternatives identified by the Mission Operations Directorate (MOD) at the Johnson Space Center (JSC) include split mission, combo lander and dual scenarios. The proposed framework subsumes the following key methods: first, the conjunction method is used to minimize the number of alternative mission scenarios; second, the Fuzzy Risk Failure Mode and Effects Analysis (RFMEA) is used to analyze the potential failure of the alternative scenarios; third, the fuzzy group Real Option Analysis (ROA) is used to estimate the expected costs and benefits of the alternative scenarios; and fourth, the fuzzy group permutation approach is used to select the optimal mission scenario. We present the results of a case study at NASA’s Johnson Space center to demonstrate: (1) the complexity of mission scenario selection involving subjective and objective judgments provided by multiple space exploration experts; and (2) a systematic and structured method for aggregating quantitative and qualitative data concerning a large number of competing and conflicting mission events.     

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System (BMCS) are studied from climatic data, “Marathon Exp. Leg.8, 1984” data, and Sea surface temperature (SST) data base “ds277-Reynolds” (1981–2000). The South Atlantic Central Water (SACW) is divided in two main types: tropical (TW) and subtropical water (ST). Water masses, Fronts, Inter-Frontal and Frontal Zones are analysed and classified: (a) the water masses: Tropical Low-Salinity Water, Tropical Surface Water, Tropical Tropospheric Water, Subtropical Low-Salinity Water, Subtropical Surface Water, Subtropical Tropospheric Water. T,S characteristics of intermediate, deep and bottom water defined by different authors are confirmed and completed; (b) the Inter-Frontal Zones: Tropical/Brazil Current Zone, Subtropical Zone and Subantarctic Zone; (c) the Frontal Zones: Subtropical, Subantarctic and Polar, and (d) the Fronts: Subtropical Front of the Brazil Current, Principal Subtropical Front, North Subtropical Front, Subtropical Surface Front, South Subtropical Front, Subantarctic Surface Front, Subantarctic Front and Polar Front. Several stable T–S relationships are found below the friction layer and at the Fronts. The maximum gradient of the oceanographic characteristics occurs at the Brazil Current Front, which can be any of the subtropical Fronts, depending on season. Minimum mean depth of the pycnocline coincides with the Fronts of the BMCS, indicating the paths of low-salinity shelf waters into the open ocean. In the work it is shown how to recover the horizontal and vertical thermohaline structure of waters from satellite data RSMAS SST.     

基于UML的电力调度管理信息系统的设计与实现

在分析了UML的建模机制的基础上，以UML为工具进行电力调度管理系统的建模设计，给出了设计过程中的用例图、类图和交互图，并在C／S和B／S模式相结合的方式下，开发出了电力调度信息管理系统的软件。     

EDA实验开发机设计

介绍了EDA实验开发机的总体设计方案，给出了各功能模块的描述方法，并对EDA实验开发机各模块的管脚锁定进行了较详细的说明。     

关于企业员工培训模式的研究

通过分析现阶段我国企业员工培训行为及新时代对员工培训的新要求，研究探讨了员工培训模式的基本架构及其关键环节。