Inconel718和GH761拉削表面状态检测

本文针对涡轮盘用合金——Inconel718和GH761,对其拉削表面层状态进行了系统的研究。采用SEM与AES技术,检测并分析了拉削表面层的显微组织和化学成分的变化。     

含磷IN718合金高应变速率下超塑性变形行为的试验研究

研究了含0.022％磷的IN718合金在高应变速率(5×102～4×10-1s-1)下的超塑性变形行为及机制.在试验条件下,合金的拉伸延伸率均超过100％,具有超塑性变形能力 随应变速率升高,延伸率降低至139％,试样颈缩严重,呈针尖状“点式”断口,断口附近晶粒组织明显细化,并存在与拉伸方向平行的纵向裂纹,碳化物对塑性变形的阻碍作用是裂纹形成的重要原因.当变形速率为5×10-2～10-1s-1时,IN718合金的超塑性变形机制为动态再结晶;当变形速率为2×10-1～4×10-1s-1时,动态再结晶仍为主要变形机制,但孪晶开始形成并起重要的协调变形作用.     

高温合金IN718上气膜冷却孔电火花加工试验

针对高温合金IN718上ø0.5mm气膜冷却孔的加工,采用煤油中旋转电极内冲液电火花成型加工方法,利用正交试验设计方法对试验进行设计分析,分析峰值电流、脉宽、占空比和冲液压强4个因素对材料去除率和电极相对损耗的影响,基于正交试验结果建立综合评分公式,选择最优加工参数.研究结果表明,峰值电流对材料去除率的影响最明显, 其次为冲液压强和占空比,脉宽对材料去除率的影响很小;峰值电流对电极相对损耗的影响最明显,其次为冲液压强,占空比和脉宽对电极相对损耗的影响很小;最优的加工参数峰值电流为8A、脉宽为130μs、占空比为0.35、冲液压强为5MPa,对该参数进行加工试验研究,与分析结果一致.      

Optimization on cooperative feed strategy for radial–axial ring rolling process of Inco718 alloy by RSM and FEM

During radial–axial ring rolling process,cooperative strategy of the radial–axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring.In order to improve the comprehensive quality of the ring parts,response surface method(RSM) is employed for the first time to optimize the cooperative feed strategy for radial–axial ring rolling process by combining it with an improved and verified 3D coupled thermo-mechanical finite element model.The feed trajectory is put forward to describe cooperative relationship of the radial–axial feed and three variables are designed based on the feed trajectory.In order to achieve multiobjective optimization,four responses including thermo mechanical parameters distribution and rolling force are proposed.Based on the FEM results,RSM is used to establish a response model to depict the function relationship between the objective response and design variables.Through this approximate model,effects of different variables on ring rolling process are analyzed connectedly and optimal feed strategy is obtained by resorting to the optimal chart specific to a constraint condition.     

Inconel617合金表面电子束熔覆WC-CoCr显微组织和耐磨性研究

Inconel617合金材料在实际应用中以耐腐蚀性、高温抗氧化性能和耐磨性为主。但是,其本身耐磨性比较低。为了提高Inconel617合金表面耐磨性,采用高速火焰喷涂与电子束表面改性技术在Inconel617合金表面制备了WC–Co Cr陶瓷涂层。分析了合金层的微观组织结构和元素分布情况,测试了合金层的硬度与耐磨性。结果表明,在电子束熔覆处理过程中,涂层重熔与基体形成冶金结合,使其耐磨性能大大提高。熔覆层硬度相比Inconel617合金硬度高出620HV0.3。     

Inconel718十二角头螺栓制造工艺技术研究

介绍了Inconel 718十二角头螺栓的材料和结构特点,分析了关键制造加工技术,如热镦锻、热处理、滚压螺纹等,确定了合理的工艺参数,并对研制件的尺寸和性能进行了评估,结果表明工艺技术设计合理。     

Inconel625合金摩擦焊接工艺研究

研究与评定了Inconel625镍基高温合金的摩擦焊接性能,在本文所优化的摩擦焊接工艺条件下,Inconel625合金均可获得焊区100%焊合、焊态组织结构良好、焊合区强度系数满足要求、焊件同轴度精度较高的摩擦焊接头。     

激光快速成形Inconel 718拉伸性能和ANSYS模拟分析研究

采用激光快速成形技术制成Inconel718材料，对其拉伸性能和微观组织进行分析。结果表明，其拉伸性能和微观组织均具有各向异性。采用ANSYS分析软件得出试样拉伸应力分布图，通过模拟数据与试验数据对比，两者应力-应变曲线得到很好吻合，为Inconel718材料复杂机械构件在研制阶段通过有限元分析提供设计依据。     

冷轧变形对Inconel 718合金δ相γ″相析出行为的影响

采用Ｘ射线衍射技术测定了冷轧Ｉｎｃｏｎｅｌ７１８合金在８６０℃加热温度下的δ相和γ″相含量，研究了冷轧变形对δ相和γ″相析出行为的影响。结果表明，冷轧变形影响δ相的析出形貌，随冷轧变形量增加，δ相由针状向颗粒状转变。δ相析出的重量百分数与时间的关系符合Ａｖｒａｍｉ方程，随冷轧变形量增加，ｎ值减小，α值增加。在８６０℃加热温度下，等温１５ｍｉｎ时已有γ″相析出，随时间增加，γ″相含量增加，达到最大值后又降低。在试验中给定的时间条件下，随冷轧变形量增加，γ″相含量降低，而δ相含量增加。     

Oxidation Properties in CO2 of Inconel Alloy 600 Coated by Simultaneous Aluminizing-Chromizing Process

IN 600 alloy was coated with two different types of coatings, Cr-modified aluminide coating this is called aluminizing-chromizing and Y-doped chromium modified aluminide coating this is called aluminizing-chromizing-yttriumizing. Diffusion coating was carried at 1 050 ℃ for 8 h under Ar atmosphere by simultaneous aluminizing-chromizing process and by simultaneous aluminizing-chromizing- yttriumizing. Cyclic oxidation tests were conducted on the uncoated and on the coated Inconel 600 alloy in the temperature range 800- 1 000 ℃ in CO2 for 100 h at 10 h cycle.The results showed that the oxidation kinetics for uncoated Inconel 600 alloy in CO2 is parabolic and the phases present are NiO, (Fe, Cr)2O3 , NiFe2O4 and NiCrO4. The oxidation kinetics for both coated systems in CO2 was found to be parabolic and the value of kP for both coated systems were found to be lower than that for uncoated Inconel 600 alloy. Oxide phases that formed on coated systems are Al2O3 and NiCrO4. The role of yttrium can be attributed to its ability to improve the adherence of the oxide scale.