纤维增强复合材料双轴强度研究进展

先对纤维增强复合材料双轴强度理论研究进行了简单的回顾,可将失效准则是否区分破坏模式 分为两类,并且比较了各强度准则的特点与存在的问题。然后对纤维增强复合材料双轴加载实验装置的发展 作了概括,对目前常用的复合材料双轴加载试样类型进行了总结分析,指出了双轴加载试样设计要求及各试样 类型的优缺点。最后,对纤维增强复合材料的双轴强度研究进行了简要评述与展望。     

大型民用客机管制与监视系统验证及测试平台的构建

研发大型民用客机航路管制与监视系统验证及测试平台,从而实现机地数据通信系统环境下的航路管制与监视信息的数据地面接收和处理;同时,依照现有的空管航路管制与监视功能的国际标准和相关区域的运行要求,实现地面管制系统向机载系统的数据发布。该项研究成果能对口飞机机载数据链相关的ATC(Air Traffic Control,空中交通管制)功能和部分监视功能ADS-C(Automatic Dependent Surveillance-Contract,合同式自动相关监视)、ADS-B(Automatic Dependent Surveillance-Broadcast,广播式自动相关监视),提供对应的地面收发端,监控机载系统数据状态。     

发射惯性坐标系下误差角与数学平台失准角的推导与仿真

基于状态空间法的捷联惯性/天文组合导航系统(SINS/CNS)需要数学平台失准角作为观测值参与滤波估计,工程实际只能得到SINS、CNS二者的姿态误差角.以弹道导弹为背景,在发射惯性坐标系下分别推导了四元数和欧拉角形式的姿态误差角与数学平台失准角之间的相互转换矩阵.建立了弹道导弹SINS/CNS数学模型,并采用EKF和UKF算法验证了该转换矩阵.仿真结果表明误差转换矩阵的正确性.     

基于IETM技术的数据要求分析

比较了MIL-D-87269A和S1000D两个标准的IETM数据要求,分析出CSDB是数据库构建的有效解决方案.基于CSDB的IETM系统实现全寿命信息管理"一次生成,多次使用"的理念.     

多媒体技术在"航空概论"课程教学改革中的应用

通过现代多媒体技术对“航空概论”课程进行改革，构建了包括飞机图片库、飞机影片库、飞机结构拆装仿真实验、航空发动机原理仿真演示、飞机液压传动装置仿真演示和电子教案库五大部分组成的航空概论电子教学平台，实现了传统教学方法向现代多媒体教学方法的转变。     

液压系统卡紧的原因及排除措施

本文主要阐述了液压系统中出现液压卡紧现象的危害、原因以及排除方法等。     

载人航天器微量污染控制装置实验研究

在分析中长期载人航天器舱室内的微量气态污染来源，以及比较国内外微量污染净化系统方案的基础上，提出适合我国将来发展的空间实验室微量污染净化系统，它由活性炭吸附床、高温催化反应装置、常温催化反应装置、风机、阀门及控制装置等组成。文中重点介绍了高温催化氧化装置实验样机的结构设计和控制方法，在搭建的实验平台上对该净化样机进行了各种工作性能实验研究。实验结果表明：温度控制器控制精度高、装置工作性能稳定、净化效率较高。     

Comparison of computational and experimental results in vibroacoustic active control using piezoelectric film technology

The present investigation concerns control of far-field acoustic radiation generated by a thin plate in a broad frequency band using piezoelectric films. System dynamics is of modal nature.This paper describes a comparison of numerical and experimental results for a closed loop type control. This comes from Optimal Control Theory via radiation filter causal transformation based on a dissipative criterion.     

Unsteady experimental and numerical investigation of aerodynamic performance in ultra-high-lift LPT

Detailed experimental and numerical investigations were performed for an ultra-high-lift front-loaded low-pressure turbine cascade (Zw = 1.58) with periodic wakes. The interaction mechanisms between the incoming wakes and endwall secondary flow were carefully examined. Wakes were produced by moving upstream rods, and flow field downstream of the cascade was measured using a seven-hole probe. Experimental results revealed that incoming wakes influenced not only the boundary layer development of the blade suction surface but also the complex endwall secondary vortex structures. On the suction surface: Incoming wakes clearly suppressed the suction side separation bubble at a low Reynolds number of 25000. Nevertheless, the effects of different wake passing frequencies were not significantly different at Re = 100000, and the profile losses under wake passing were even greater than in the absence of wakes. At the endwalls: Incoming wakes more strongly suppressed secondary flow at Re = 100000 than at Re = 25000, because the low-momentum fluid inside the incoming wakes clearly increased the endwall cross-passage pressure gradient at Re = 25000. The experimental results indicated that periodic wakes decreased the passage vortex and counter vortex core strength by 25% and 30%, respectively, at Re = 100000. Instantaneous results also demonstrated that endwall secondary vortices decreased significantly near the position of wakes passing.