基于实时观测数据的大气密度模式修正

针对国际大气密度模式NRLMSISE-00, 以中国神舟飞船探测数据为基础, 提出一种基于实时大气密度观测数据的模式修正方法. 通过计算分析模式计算结果与探测数据的误差分布特征, 针对地磁相对平静期(Ap≤ 30)模式计算的误差特点, 建立了一种平均误差修正方法, 即认为在相对平静期, 在相同纬度和地方时, 模式误差基本相同, 某一时刻模式预测误差可以近似用与其相同纬度和地方时的平均误差来替代, 从而对模式预测结果进行修正. 以神舟4号探测数据为基础, 通过对模式预测结果采用两种方式进行修正, 可以看到模式误差得到了一定的改善. 采用误差库累积准实时修正, 修正后的误差由原来的20 %降至6 %; 采用误差库5天滑动预报修正后, 模式提前1, 2, 3天的预测误差由原来的20 %分别降至7.8 %, 9.4 %和10.5%.     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

数据分发用户协议模型研究

通过分析某型号卫星用户地面链路的实际应用情况,结合互联网应用协议模型,面向系统未来发展需要,提出了数据分发用户协议模型,分析了协议模型的层次关系,介绍了协议模型的具体工作过程,并对其工程可行性进行了分析,解决了地面链路连接管理以及应用负载分配的应用问题,在一定程度上避免了系统安全隐患,为系统实际工程应用提供了切实可行的途径。     

金属增材制造数据处理与工艺规划研究综述

金属增材制造数据处理与工艺规划是金属增材制造软件系统的核心,涵盖了金属支撑结构设计、模型切片以及路径规划等内容,决定着最终金属零部件的产品性能.从金属增材制造模型前处理出发,较为全面地概述了与之相关的多类型支撑设计和新型支撑优化等数据处理内容,针对金属增材制造数据处理中模型切片这一关键环节,分别从平面切片、自适应切片和...     

一种改进的卫星星座服务可用性评价方法

针对存在缺失卫星的轨道面,将星座中的卫星分为两组,从概率角度并采用组合方法提出了星座覆盖可用性和导航精度可用性指标的统计评价模型和仿真流程,进而通过对两项可用性指标进行加权建立了形式统一的服务可用性加权评价模型。利用该模型对单个或多个轨道面有确定数量卫星缺失的状态下,星座构型和轨道参数变化对其服务可用性的影响进行了研究。结果表明,星座轨道平面数和轨道高度均对服务可用性有较大影响。提出的服务可用性评价模型物理意义明确,可有效减少指标评价时间,研究结论有助于在概念设计阶段对星座构型和轨道参数进行优选。     

卫星相机中侧视反射镜振动及微重力环境下的影响分析

文章介绍了“资源一号”卫星02星在地面测试时CCD相机图像扰振现象和对像质的影响, 图像扰振的原因———相机的侧视反射镜发生振动。探讨了侧视反射镜共振的机理: 由于预紧蜗簧与蜗轮弹性变形的组合弹簧而形成共振系统, 从而使外来干扰振动被放大, 并由此得到克服或控制扰振的方法。此外, 还讨论重力环境变化对反射镜振动的影响,认为不会增大振动的影响, 卫星在轨工作时相机可以保持地面同样效果。卫星发射后, 图像像质良好, 说明反射镜振动得到控制, 也说明重力环境改变对振动没有异常变化。     

卫星红外辐射场理论模拟

在红外辐射场理论建模通用框架研究成果的基础上,对卫星的几何构型进行建模;通过背景辐射的非均匀化考虑,根据相应的物理模型对卫星温度场和红外辐射场进行了模拟计算,得到了卫星外表温度场和红外辐射场分布。     

Observations of loops and prominences

We review recent observations by the Yohkoh-SXT in collaboration with other spacecraft and ground-based observatories of coronal loops and prominences. These new results point to problems that SoHO will be able to address. With a unique combination of rapid-cadence digital imaging (32 s full-disk and 2 s partial-frame images), high spatial resolution (2.5 arcsec pixels), high sensitivity (EM 10⁴² cm^–3), a low-scatter mirror, and large dynamic range, SXT can observe a vast range of targets on the Sun. Over the first 21 months of Yohkoh operations, SXT has taken over one million images of the corona and so is building up an invaluable long-term database on the large-scale corona and loop geometry. The most striking thing about the SXT images is the range of loop sizes and shapes. The active regions are a bright tangle of magnetic field lines, surrounded by a network of large-scale quiet-Sun loops stretching over distances in excess of 10⁵ km. The cross-section of most loops seems to be constant. Loops displaying significant increase in the ratio of the footpoint to loop-top diameter () are the exception, not the rule, implying the presence of widespread currents in the corona.All magnetic structures show changes. Time scales range from seconds to months. The question of how these structures are formed, become filled with hot plasma, and are maintained is still open. While we see the propagation of brightenings along the length of active-region loops and in X-ray jets with velocities of several hundred km/s, much higher velocities are seen in the quiet Sun. In XBP flares, for example, velocities of over 1000 km/s are common. Active-region loops seem to be in constant motion, moving slowly outward, carrying plasma with them. During flares, loops often produce localized brightenings at the base and later at the apex of the loop. Quiescent filaments and prominences have been observed regularly. Their coronal manifestation seems to be an extended arcade of loops overlying the filament. Reliable alignment of the ground-based data with the X-ray images make it possible to make a detailed intercomparison of the hot and cold plasma structures over extended periods. Hence we are able to follow the long-term evolution of these structures and see how they become destabilized and erupt.     

铝合金锻件重复淬火保温时间对组织性能的影响

分析了铝合金锻件重复淬火保温时间的长短及其组织性能的影响情况。根据大量的试验数据,证实了重复淬火保温时间及时效保温时间的长短对锻件性能的直接影响,并以此确定了合理的工艺参数。     

燃气轮机转子动力特性分析的旋转对称有限元模型

本文给出了燃气轮机转子临界转速和不平衡响应计算分析的旋转对称有限元模型,付立叶级数的引入可以使得三维转子只在一个基础扇区上使用三维单元建立有限元模型。与梁单元相比,实体单元能准确描述转子的几何形状。文中给出了一个验证性算例和一个工程实例。