Assessment of the suitability of public mobile data networks for aircraft telemetry and control purposes

This paper provides a review of the state of the art of relevant work on the use of public mobile data networks for aircraft telemetry and control proposes. Moreover, it describes the characterisation for airborne uses of the public mobile data communication systems known broadly as 3G. The motivation for this study was to explore how this mature public communication systems could be used for aviation purposes. An experimental system was fitted to a light aircraft to record communication latency, line speed, RF level, packet loss and cell tower identifier. Communications was established using internet protocols and connection was made to a local server. The aircraft was flown in both remote and populous areas at altitudes up to 8500 ft in a region located in South East Queensland, Australia. Results show that the average airborne RF levels are better than those on the ground by 21% and in the order of −77 dbm. Latencies were in the order of 500 ms (1/2 the latency of Iridium), an average download speed of 0.48 Mb/s, average uplink speed of 0.85 Mb/s, a packet of information loss of 6.5%. The maximum communication range was also observed to be 70 km from a single cell station. The paper also describes possible limitations and utility of using such communications architecture for both manned and unmanned aircraft systems.     

多介质气体微小流量标准装置设计探讨CSCD

介绍了气体流量计量发展的特点及需求,提出建立一套多介质气体微小流量标准装置。结合实际装置指标需求,比较分析了常用气体流量标准原理特点,确定采用了PVTt法原理,根据设计指标需求及原理提出了多介质气体微小流量装置整体初步设计方案,并进行了测量不确定度分析。     

The heart-shaped supernova remnant 3C 391 viewed in multi-bands

Using Chandra X-ray, Spitzer mid-IR, and 1.5 GHz radio data, we examine the spatial structure of SNR 3C 391. The X-ray surface brightness is generally anti-correlative with the IR and radio brightness. The multiband data clearly exhibit a heart-shaped morphology and show the multi-shell structure of the remnant. A previously unseen thin brace-like shell on the south detected at 24 μm is projected outside the radio border and confines the southern faint X-ray emission. The leading 24 μm knot on the SE boundary appears to be partly surrounded by soft X-ray emitting gas. The mid-IR emission is dominated by the contribution of the shocked dust grains, which may have been partly destroyed by sputtering.     

线谱对(LSP)分析在G.729语音编码算法中的应用

本文介绍了线谱对(Linear Spectrum Pair,LSP)分析的基本原理及其在G.729中的应用,同时分析比较了LSP参数与常用的线性预测系数LPC的区别,仿真结果表明,LSP参数的抗干扰能力远比LPC系数的抗干扰能力强。     

自调节模拟低通滤波器的研究

通过对有源低通滤波器，频率／电压转换器AD650及其变容二极管的特性分析，提出由信号频率来自调节有源低通滤波器截止频率的新设计方案，并对其可行性进行了分析和研究。     

光电编码器模拟测速机在转台控制系统中的应用

在转台的可靠性设计中, 常用测速机输出作为转台限速报警的触发信号, 但传统的测速机在安装、成本及精度上都不具有优势。利用美国AD 公司生产的AD650 芯片,对被广泛用于转台测角系统中的Heidenhain 公司的RON886C 型增量式旋转编码器 信号进行电压频率(V/ F) 和频率电压(F/V) 转换, 实现利用编码器输出模拟测速机电路, 不仅可以满足限速保护要求,并且较测速机具有成本低,安装使用方便,且精度较高的 优点,在实际应用中效果良好。     

线谱对(LSP)分析在G.729语音编码算法中的应用

本文介绍了线谱对(Linear Spectrum Pair,LSP)分析的基本原理及其在G.729中的应用,同时分析比较了LSP参数与常用的线性预测系数LPC的区别,仿真结果表明,LSP参数的抗干扰能力远比LPC系数的抗干扰能力强.     

凝固冷速对铸造镍基高温合金K417G显微组织的影响

对铸造镍基高温合金K417G进行了不同冷却速率的凝固试验,并对凝固后的试样进行了光学金相和定量金相分析,研究了凝固冷速对合金显微组织的影响,通过线性回归的方法确定了平均枝晶间距与凝固冷速的关系.结果表明:凝固冷速增大明显细化树枝晶、MC碳化物和(γ γ′)共晶.冷速对MC碳化物的量影响不大,但对(γ γ′)共晶量有明显影响,过快和过慢的冷速都能引起(γ γ′)共晶量增加.K417G合金的平均枝晶间距(λ/μm)与凝固时冷速(V/℃·s-1)存在λ=85.1V-0.35的对应关系,根据该关系式可以通过测量铸件不同部位的平均枝晶大小确定该部位凝固时的冷却速率.     

深空干涉测量天线G/T值指标设计

G/T是天线的一项重要技术指标,在综合考虑测地VLBI(Very Long Baseline Interferometry,甚长基线干涉测量)和航天器VLBI观测两者需求的基础上,提出了深空干涉测量天线的G/T指标设计方法.首先根据射电源的空间分布以及流量密度特性,确定了测地VLBI和航天器VLBI观测模式下射电源流量密度的要求.在此基础上建立了2种观测模式下时延误差与深空干涉测量天线G/T之间的关系模型.最后参考目前国际国内测地VLBI观测中的通用参数设置以及月球探测任务中航天器VLBI观测的参数设置,对不同观测任务、不同观测模式下的G/T要求进行仿真分析.综合测地VLBI和航天器VLBI观测仿真分析的结果,S频段G/T建议不小于32 dB/K,X频段G/T建议不小于43 dB/K.仿真分析结果可以作为后续深空干涉测量天线G/T设计的参考.     

一类N-策略M/G/1排队系统队长分布

文章考虑具有延误休假时间的N-策略M/G/1排队系统,通过全概率分解等技术研究了队长的瞬态和稳态性质,导出了在任意时刻t瞬态队长分布的拉普拉斯变换递推表达式和稳态队长分布的递推表达式,最后研究了稳态队长分布的统计性质。