气膜孔内局部堵塞对气膜冷却特性的影响

在吹风比为0.3~1.5,堵塞比为0.1~0.5范围内,对平板上单排倾斜气膜孔内局部堵塞所引起的冷气射流流动和冷却特性变化进行了数值研究,分析了堵塞比、堵塞位置和吹风比对绝热气膜冷却效率的影响.在研究参数范围内的研究结果表明:气膜孔出口端前缘的局部堵塞有利于抑制肾形涡,对气膜孔下游的绝热气膜冷却效率有改善作用,并且随着堵塞比和吹风比的增加,对冷却效果的改善越为明显.而在气膜孔出口端尾缘或侧边的堵塞则在较大的堵塞比下削弱气膜冷却效果.相对于气膜孔出气端的局部堵塞,在气膜孔进气端和中部的堵塞对绝热气膜冷却效率的影响要微弱得多.     

肋角度对气膜冷却特性的影响

在光滑二次流通道的基础上,分析对比了两种带肋通道(135°肋和45°肋)对气膜冷却特性的影响.采用瞬态液晶测试技术获得了气膜孔下游表面传热系数比与气膜冷却效率分布.使用Fluent软件RANS数值方法对相应结构进行了数值模拟,并使用了realizable k-ε湍流模型.光滑二次流通道模型中,气膜孔内流线呈螺旋状分布,导致较大的孔内速度分离与流动损失.冷气射流分成两部分,其中一股形成一对偏斜的对转涡.135°肋结构中,二次流通道上部分的旋转涡为顺时针方向,使得气流易于流入气膜孔,气膜孔内流线呈直线分布.45°肋结构中,二次流通道上部分旋转涡为逆时针方向,增强了气膜孔内旋转涡.45°肋结构中冷气流入气膜孔之后的流动结构与光滑二次流通道结构相似.135°肋结构气膜冷却效率最大而表面传热系数比最低.     

Tear Resistance of Orthogonal Kevlar-PWF-reinforced TPU Film

This work seeks to investigate the notch sensitivity and fracture behaviour of orthogonal Kevlar-plain woven fabric (PWF)-reinforced thermoplastic polyurethanes (TPU) film applied to high altitude balloon. Four types of specimens are implemented to measure notched strength and fracture toughness by conducting static tension and tear tests on an MTS system respectively. The damage and failure mechanisms are discussed and the results for notched strength and tear resistance are evaluated and compared with each other. From the experiments, it is found that the notch sensitivity of the film increases with the increase in the size of the hole, but the notch sensitivity and the stress concentration of the notch are insignificant and there is a decrease of only about 4%-10% in tensile strength for the notched specimens with different hole sizes in diameter compared with the unnotched specimen. In contrast, the tear resistance containing a central slit with only 1 mm length is about half of tensile strength of the unnotched film, which implies that the tear resistance exists an significant notch sensitivity. The results of this study provide an insight into notch sensitivity and fracture behaviour of the Kevlar-PWF-reinforced TPU film and constitute a fundamental basis for the design of high altitude balloon.     

H_3PO_4 C_6H_(11)NaO_7体系中钛合金阳极氧化着色工艺研究

作者在H3PO4 C6 H1 1 NaO7体系中对TC10、TC3、TC1、TA2阳极氧化均能得到丰富色彩。研究表明 ,钛材的成分、电压、pH值、升压方式、氧化时间等对阳极氧化膜的颜色都有一定的影响 ,电压是影响氧化膜颜色的主要因素。此外 ,稀土元素铈和双氧水的加入能提高膜层的耐蚀性。     

EXPERIMENTAL STUDY OF FLOW FIELDS IN THE VICINITY OF A FILM COOLING HOLE EXIT

Sofar,filmcoolingisextensivelyadoptedforprotectinghightemperaturepartsingasturbine.Manyresearchworksarefocusedonflow[1~3Jandheattransfer[4'5jinthedownstreamofthecircularhole,buttheflowcharacteristicsattheholeexit,especiallyforflaredholeexit,arenotreportedatpresent.Inordertodesignasuitab1eholeshapeforpracticalcoolingandprovideplentyexperimentaldataforverificationofcomputercodes,adetai1edexperimentalin-vestigationabout3-Dflowfieldsattheexitofasinglecircularandfan-shapedholehasbeencompleted.1Exp…     

NH－93型有机氟涂料的研究

采用国产含氟乳液为基料，研究了辅料的种类和用量，涂料的组成及工艺参数对涂膜性能的影响，提出了能获得良好涂膜的ＮＨ－９３型氟涂料的配方和成膜条件。     

热膜技术在水流测速中的应用研究

研究了在我国现有条件下，利用普通自来水，在室内和试验水槽中不设调温装置的情况下，热膜技术在水流测速中应用的有关技术问题。并利用从美国TSI公司进口的1050A恒温型热线／热膜流速仪测量了紊动射流和三峡溢流坝模型冲坑中掺气水流的脉动流速及紊动结构问题，获得了成功。     

TEMPERATURE EFFECT ON OXIDATION PROTECTION LIFE OF MULTI-LAYER COATING FOR C/C COMPOSITES

Carbon-carboncomposites(C/C)exhibitexcellentstructuralpropertiesabove165OC,andareconsideredasthemostpromisingcandidatematerialsforthehighthrust-weightratioturbineengines.Asakeytechnologyforthehigh-temperaturestructuralapplicationsofC/C,oxidationprotectionispaidmoreandmoreattentionrecently.TheoxidationprotectionllfeofacoatedC/Cisdeterminedbyenvironmenta1temperature,becauseitnotonlydecidesthether-mochemicalconditionsofinterfacesinacoating,butalsocontrolsthedynamicprocessofoxy-gendiffusion.The…     

Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.     

纵向波纹隔热屏气膜冷却特性实验

针对加力燃烧室纵向波纹隔热屏气膜冷却效果开展了细致的实验研究,利用红外热像仪测量了隔热屏壁面的温度分布,分析了隔热屏板型、吹风比、开孔率等参数对气膜冷却效率的影响。实验中板型选取了平板和纵向波纹隔热屏,吹风比变化范围是0.5~3.0,开孔率变化范围是1.4%~3.7%。结果表明:相比于平板隔热屏的气膜冷却效率沿程逐渐增加,纵向波纹隔热屏的气膜冷却效率随波纹板的起伏而起伏且大于平板隔热屏;随着吹风比的增加气膜冷却效率逐渐加大,在吹风比为3.0时达到最大值;气膜冷却效率在波峰处低,波谷处高,整体上随波纹板的起伏而波动,吹风比越小,气膜冷却效率随波纹板的起伏变化越明显;高吹风比(吹风比为2.0~3.0)下,气膜冷却效率沿程变化与增幅较为缓慢;整体上,随着开孔率的增加气膜冷却效率逐渐加大,小开孔率(开孔率为1.4%、2.7%)下的气膜冷却效率相差不大,但在次流背风侧,开孔率小的气膜冷却效率要小于开孔率大的气膜冷却效率。