多自由度振动环境下惯组非线性传递特性研究

惯组作为飞行器姿控系统的传感器,其局部安装结构的传递特性的测量精度直接关系到导航精度。目前,惯组普遍使用减振器进行隔振,而减振器都呈现出较强的非线性特征。为了考察惯组在不同工况下的传递特性,将惯组简化为六自由度Duffing模型,推导了基础激励下系统的运动微分方程,并用龙格-库塔法对方程进行求解,分析了自由衰减振动和强迫振动下不同工况的系统传递特性。结果表明,多自由度激励比单自由度激励工况得到的系统传递特性的频率和幅值都低。考虑到惯组真实的使用环境,应当在多自由度振动环境下进行传递特性试验。     

基于测试数据的卡箍非线性等效建模方法

为了快速准确地计算卡箍管路系统的振动响应，提出了基于测试数据的卡箍非线性等效建模方法。对卡箍直管系统进行低幅值激励的模态测试，利用试验数据对有限元模型进行修正，识别卡箍线性刚度、线性阻尼参数。对卡箍直管系统开展不同激励水平下的恒力测试，通过样条插值多项式法将恒力频响函数转换为恒位移、恒速度频响函数，并进一步识别卡箍非线性等效刚度、非线性等效阻尼，建立了考虑卡箍非线性的等效动力学模型。研究表明:该卡箍等效动力学模型的预测频响函数与试验频响函数的最大误差仅为-6.9%，可以有效地反映卡箍实际的刚度、阻尼特性，对解决卡箍管路系统的振动响应分析具有重要的指导意义。      

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

非线性不平衡转子轴承系统周期解的预测

本文提出一种对非线性不平衡转子轴承系统周期解进行预测的新型算法,它利用系统周期解的稳态及瞬态信息,反解雅可比矩阵,实现对系统周期解的预测追踪,并利用反解得出的雅可比矩阵,求得系统周期解的Floquet乘子以判别其非线性稳定性。文中以刚性不平衡转子轴承系统为例,实现了周期解的预测追踪及非线性稳定性判别,说明了新算法的有效性。      

国土卫星图象的校正方法

自国土普查卫星发射成功以来,针对国土星成象的几何特性,先后研制了一系列针对不同成象条件和地表状况的几何校正方法。文章的目的,就是对这些方法,从客观的角度,进行评述。找出存在的问题,并指出解决这些问题的方法。     

空间大挠度梁的有限元动力学响应分析

从弹性梁的非线性应变位移关系出发,结合Hamilton变分原理推导出了作大挠度振动的空间梁的动力学有限元方程。方程中考虑了与变形相耦合的非线性惯性项。计算表明,作大挠度振动的悬臂梁的响应是由不同的谐波成分组成;在相同结构阻尼影响下,大挠度梁的稳态振幅比线性情况下的稳态振幅要低;非线性惯性项与弯扭耦合项对系统的动力学特性有比较明显的影响。     

考虑气动力非线性的柔性飞机阵风响应分析

针对大展弦比柔性飞机阵风响应问题,考虑在大攻角(AOA)情况下气动力非线性的影响,通过将修正的Theodorsen方法与片条理论相结合,得到非线性的时域非定常气动力;在此基础上,建立阵风干扰下的大展弦比柔性飞机非线性气动弹性模型,完整地发展了一种新颖的可考虑气动力非线性的大展弦比柔性飞机阵风响应分析方法.结合算例模型开展方法验证和数值仿真,对比翼尖和质心(CG)处阵风附加过载在线性和非线性情况下的变化.算例结果表明,考虑大攻角情况下的气动力非线性后,大展弦比飞机的阵风响应较线性情况有明显变化,翼尖处的阵风附加过载最多可减少41.7%,气动力非线性的影响不可忽视.      

On the observability of Mars entry navigation using radiometric measurements

A thorough observability analysis of the Mars entry navigation using radiometric measurements from ground based beacons is performed. This analysis involves the evaluation of the Fisher information matrix which is derived from the maximum likelihood estimation. A series of navigation cases with multiple beacons are investigated, and both range and range-rate measurements are considered. The determinant of Fisher information matrix is used to quantify the observability of navigation system, while the trace of Fisher information matrix is used to determine the lower-bound of estimation errors. For one and two beacon cases, the navigation system is unobservable. However, the eigenvectors of Fisher information matrix give the observable and unobservable component. When three or more beacon measurements are employed, the states of entry vehicle become observable. Some valuable analytic conclusions on the relationship between the geometric configuration of beacons and observability are obtained consequently. Finally, simulation results from two navigation examples indicate that our effort is useful for understanding and assessing the observability of the Mars entry navigation using radiometric measurements.     

基于图像的经纬仪测量目标快速瞄准技术

电子经纬仪是一种高精度的测角仪器,由多台高精度电子经纬仪构成的测量系统可以实现三维坐标测量,用于对大型工业产品的几何检测。但经纬仪在测量过程中仍然需要人工瞄准目标,存在速度慢、效率低、人为因素影响大等不足。实现经纬仪自动照准目标功能将是一个新的发展方向。提出一种基于图像的自动瞄准技术,通过在经纬仪上安装一台相机获取待测目标点的图像,利用图形目标识别技术获取目标点图像坐标,依据相机与经纬仪的空间关系可以获得各目标点相对于经纬仪的初始角度,从而实现目标点的快速概略定位,理论推导及实验证明本方法能够准确有效的获得目标点的概略位置。