Stability analysis of robotic longitudinal-torsional composite ultrasonic milling

Currently, industrial robots are considered as an alternative towards traditional machine tools. Especially for the large-scale parts milling, robotic flexibility and low cost make it possess the irreplaceability. However, the milling chatter caused by its weak rigidity hampers robotic application and promotion severely in aviation industry. Rotary ultrasonic milling (RUM) technology with one-dimensional axial vibration has been proven and approved on avoiding robotic chatter. Based on this, the research of project team demonstrates that longitudinal-torsional composite ultrasonic milling (CUM-LT) involving separation characteristic has a greater advantage than RUM in terms of chatter suppression. Thereby, the CUM-LT as a new means is applied to avoid processing vibration of robotic milling system. And its influence mechanism on stability improvement of weak stiffness processing system is clarified. Meanwhile, the approaches to strengthen separation effect are provided innovatively. Moreover, a new analysis method of robotic CUM-LT (RCUM-LT) stability is proposed on the basis of ultrasonic function angles. The simulation and experimental results indicate that compared with robotic RUM (RRUM), stability regions of separated RCUM-LT (SRCUM-LT) and unseparated RCUM-LT (URCUM-LT) are improved by 124.42% and 39.20%, respectively. The addition of torsional ultrasonic energy has a wonderful effect on the milling chatter suppression of low stiffness robots.     

利用GPS进行姿态估计的一种算法

首先建立了全球定位系统（ＧＰＳ）姿态确定的观测方程;然后给出了利用ＧＰＳ进行飞行器姿态估计的模型,并对该模型进行了线性处理;最后利用攻推广卡尔曼滤波技术,针对某飞行器进行了仿真计算。计算结果表明,对于不同的测量噪声和系统噪声,滤波器都有较好的估计,姿态估计的精度明显高于单纯ＧＰＳ姿态确定的精度,可以满足大多数飞行器对姿态确定的要求,证实了模型和算法可用性。     

GPS 定位解的可信度研究

基于模糊数学理论的研究方法,给出了GPS定位解的可信度的定义。然后给出了可信度的解析表达式,并利用可信度的解析表达式对可信度的性质进行了研究。最后探讨了可信度可能的应用。     

INTEGRATED GPS/INS OF PSEUDO-RANGE DELTA-RANGE SEMI-PHYSICAL SIMULATION'S RESEARCH

In order to further study the performance of tightly integrated navigation system of GPS/INS, a semi-physical simulation of tightly coupled system has been done based on the data gathered from the experiment of integrated system of GPS and INS. The closed-loop Kalman Filter and U-D discompose algorithm have been used. The simulation results associated to four integrated models of pseudo-range, delta-range, pseudo-range and delta-range alternation, and pseudo-range and delta-range synthesis have been provided, and the actual effects of variously integrated models have been analyzed. The results show that the pseudo-range and delta-range synthesis coupled model is the most effective to improve the coupled system performance and the individual delta-range coupled model had better be avoided in application.     

利用GPS/INS导引飞机精密进场的数值仿真研究

建立了飞机进场的数学模型和导航观测器模型;确定了导引飞机精密进场的最优控制;以Airbus-300为例,给出了稳定的着陆窗口;计算了在GPS的各种定位精度范围内,从着陆窗口内开始着陆的飞机所能达到的等级;研究了GPS采样周期对飞机着陆精度的影响;分析了大气紊流和常值侧风对飞机着陆精度的影响。从计算和数值仿真结果得出了一些初步结论。     

一种抑制控制力矩陀螺框架电机共模电压的方法

控制力矩陀螺作为执行机构,是保障航天器在轨寿命和工作性能的核心部件之一。为了抑制控制力矩陀螺外框电机的共模电压,提高控制力矩陀螺的在轨寿命,本文提出了一种三相四桥臂的拓扑结构与优化的SVPWM调制算法结合的共模电压抑制方法,调制过程中避免零矢量的使用,使驱动器可以保持在平衡状态,经过仿真试验的结果对比分析,验证了这种方法可以有效的抑制系统的共模电压。     

谐振式光纤陀螺系统建模及其应用研究

谐振式光纤陀螺作为高精度角速度传感器,以其集成化高、成本低以及抗干扰性强等独有优势,逐渐成为下一代光学陀螺研究发展的热点。通过对谐振式光纤陀螺工作原理的分析,建立了陀螺数字信号处理系统可视化模型,并对系统谐振曲线和同步解调曲线等开环输出以及锁频反馈下闭环输出进行了模拟仿真。利用仿真模型分析了正弦波调制下谐振谱分裂现象,并搭建实验装置对其进行了验证。结果表明,实验中正弦信号调制频率高于系统谐振输出半高全宽一半,即对应2 MHz时,谐振谱分裂会导致同步解调输出线性区域出现明显失真,严重恶化了标度因数线性度。因此,搭建的谐振式光纤陀螺仿真模型能够准确而有效地模拟系统的工作状态,在系统噪声抑制和精度提升方面具有指导性意义。     

GPS精密点定位的数据处理

在GPS精密点定位数据处理中,通常采用所谓无差分模型.然而,GPS单站观测量也可通过不同差分组合以减少未知参数数目,且在理论上与无差分模型等价.文中利用实际GPS观测数据,比较了不同点定位差分模型的定位精度和其他指标.     

发射系下SINS/GPS/CNS组合导航系统联邦粒子滤波算法

传统的扩展卡尔曼滤波(Extended Kalman filter, EKF)算法应用于未来高超、空天飞行器的组合导航系统时,因其模型线性化展开会导致模型不准确,从而引起导航精度下降;采用蒙特卡洛方法来实现递推贝叶斯估计问题的粒子滤波(Particle filter,PF)算法能有效避免引入线性化误差,具有一定的优势。据此,针对高超、空天飞行器在发射过程中通常需要直接获得发射惯性系下的高精度导航参数的需求,提高发射惯性系下弹载组合导航系统滤波算法的精确性就尤为重要,PF滤波算法无需对非线性系统进行线性化展开即可直接实现对非线性系统的状态误差估计。为此,本文将PF滤波算法引入空天飞行器SINS/GPS/CNS多信息融合组合导航系统,设计了发射系下基于联邦滤波器的PF滤波算法,实现了对组合导航系统状态参数的直接建模估计。算法仿真结果表明,相较于发射系下SINS/GPS/CNS组合导航系统联邦EKF滤波算法,PF滤波算法有效提高了组合导航系统滤波精度。     

多径信道下基于恒模算法的遥测信号盲均衡

运载火箭在塔架静态测试时易受多径衰落影响,导致遥测信号产生码间干扰。本文对PCM-FM体制遥测信号的多径信道使用恒模算法(CMA)进行盲均衡研究,针对遥测信道中的码间干扰展开理论分析和Matlab仿真,并搭建盲均衡功能测试平台开展实验验证。结果表明:CMA收敛速度高、误码率低,对多径干扰具有较好的鲁棒性和实用性。