扩展近似时间最优伺服控制及其试验验证

针对带有惯性阻尼环节的典型伺服系统,提出一种能实现大范围快速定点运动的控制方案。控制方案首先利用时间最优控制律进行快速目标追踪,当系统速度下降到一定范围内时平滑切换成线性控制律。采用线性控制区内的闭环极点阻尼系统和自然频率作为设计参数,给出了全参数化的控制律。基于Lyapunov理论分析了控制系统的闭环稳定性。将该控制方案用于一个直流伺服电机的位置-速度环的定点位置控制,并进行了MATLAB数字仿真和基于TMS320F28335 DSC的试验研究。结果表明:所设计的控制系统可以对大范围的给定目标进行快速和准确的跟踪,且对扰动和系统参数差异具有较好的鲁棒性。     

基于空间电压矢量的软起动器变频阶段的优化及仿真

对于空间电压矢量软起动器变频阶段的负相转矩和转速振荡问题,依据电压矢量的控制方法,对频率转换点的选取实行优化。以电机负载状况来获取各个变频阶段的控制角初始值,以恒压频比原则获取控制角终值,以此对软起动器变频阶段的控制进行优化。最后对优化后的软起动器进行仿真验证,结果显示,软起动器工作在变频阶段时,在频率转换点出现的转速超调得到了改善,电流峰值有所减小,没有负转矩出现。     

表贴式永磁同步电机直接转矩控制变角度预测控制

基于以电压矢量相角为变量的表贴式永磁同步电机(SPMSM)磁链和转矩方程,采用预测控制计算得出施加不同电压矢量相角的下一时刻磁链和转矩值,选择使磁链和转矩误差目标函数最小的电压矢量相角作为最优值,从而确定下一时刻施加的电压矢量。仿真结果表明:在电压矢量变角度预测下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形为正弦。研究了不同等分电压矢量相角选择区域方式下变角度预测控制系统的控制效果。综合考虑控制效果和计算负担,变角度预测控制下将相角选择区域四等分比较理想。     

基于离散反电动势估计的永磁同步电机无速度传感器控制

针对高速永磁同步电机(PMSM)的无速度传感器控制问题,提出了一种基于离散反电动势估计的PMSM无速度传感器控制策略。实施离散反电动势估计的设计有三点:首先,设计了离散dq电流观测器以消除反电动势估计中的电感交叉耦合效应;然后,设计了延迟补偿模型以补偿数模转换引起的电压误差,同时设计了较为精确的离散模型,以克服由数字实现导致的估计反电动势和实际反电动势之间的偏差;最后,开展了高速PMSM驱动试验,试验结果验证了所提出的高速PMSM无速度传感器控制方案的性能。     

固定几何气动矢量喷管气动性能数值仿真

为掌握固定几何气动矢量喷管气动性能,通过CFD数值模拟的方法,研究了主流落压比、扩张段二次流落压比、扩张段二次流角度和引射对固定几何气动矢量喷管轴向推力系数的影响;主流落压比、扩张段二次流落压比和扩张段二次流角度对矢量角的影响;主流落压比、喉道二次流落压比和喉道二次流角度对喉道控制率的影响。结果表明:随主流落压比增大轴向推力系数增大,矢量角减小,喉道控制率减小;随扩张段二次流落压比增大推力系数减小,矢量角增大;随喉道二次流落压比增大,喉道控制率增大;随扩张段二次流角增大轴向推力系数减小,矢量角略有减小;随喉道二次流角增大喉道控制率增大;随引射方式增加喷管推力系数增大。     

折叠机翼变体飞机非对称变形控制效率分析

折叠机翼变体飞机变形量大,变形引起的气动参数变化显著,提出一种将非对称变形作为操纵输入的控制方案,研究非对称变形的控制效率和有效区间。首先建立能够完整描述变形过程的非线性动力学方程和气动力模型;然后基于非对称变形控制方法建立一种非对称变形操纵模型;最后通过与常规操纵面效率对比和仿真的动态响应总结出非对称变形操纵的最大变形操纵有效区间。结果表明:在较低飞行速度下非对称变形操纵效率高,非对称变形操纵能够在基准折叠角度90°附近提供最高的滚转操纵效率。     

基于电动汽车驱动用无刷直流电机控制仿真

通过研究电动汽车中无刷直流电机(BLDCM)负载运行时电机的性能与负载之间的密切关系,针对BLDCM调速应用,提出了一种改进广义预测控制的算法。通过对仿真模型中的BLDCM的数学模型分析,建立BLDCM的控制系统并进行仿真研究。仿真结果表明:当采用改进广义预测算法,与以往的PID控制算法相比,BLDCM的负载稳态精度以及最大转速波动都得到明显的改善,具有响应快、控制精度高,电机负载抗干扰能力强等特点,BLDCM可满足电动汽车行驶中BLDCM运行的要求。     

无刷直流电机神经网络PI控制系统设计

针对传统PI控制存在的动、静态控制性能较差的缺点,提出一种基于神经网络的PI控制方法。将神经网络与传统PI控制结合,构建神经网络PI控制系统,建立三层BP神经网络,并通过梯度下降法对各项参数进行修正,从而实现kp、ki参数的在线调节。仿真及试验证明,与传统PI控制方法相比,使用神经网络的PI控制系统在不同外部条件下都具有更快的响应速度和更小的超调量,可明显提高系统的动、静态性能。     

A novel integrated self-powered brake system for more electric aircraft

Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA.     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.