电推进羽流粒子束溅射的蒙特卡罗模拟

为了研究电推进羽流对推力器及航天器造成的溅射腐蚀作用,采用蒙特卡罗方法对羽流等离子体对材料的溅射进行模拟,研究了溅射的级联碰撞机理,并开展了Xe离子正入射、斜入射Cu材料的溅射率、溅射产物的能量分布以及空间角分布的研究.结果显示,蒙特卡罗方法对溅射率和能量分布的计算结果与试验结果吻合较好,误差<30％,但是斜入射溅射率...     

Design and application of an Electric Tail Rotor Drive Control (ETRDC) for helicopters with performance tests

With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.     

基于粒子群算法的电帆轨迹优化设计

电帆是一种利用太阳风动量的新颖的无工质空间推进系统,文章研究了以电帆为对象的行星际转移轨迹优化问题。以地球轨道转移到火星、金星轨道为任务对象,采用连续推力模型,研究极坐标系下最小时间转移轨迹优化设计问题。提出了两种基于粒子群算法(PSO)的直接优化方法,避免对协态变量初值敏感的两点边值问题（TPBVP）求解。方法一是通过打靶法直接离散化控制量输入,将最优控制问题转化为非线性规划参数优化问题,采用PSO算法寻优,获得近似最优的转移轨迹。方法二是针对任何连续控制律曲线都能以一定精度的多项式函数进行曲线拟合的特性,设计逼近最优转移轨迹控制律的多项式函数,通过PSO算法优化多项式函数参数获得逼近最优解的转移轨迹。仿真结果表明采用上述两种方法进行转移轨迹优化设计,具有随机猜测初值、全局收敛、鲁棒性强的特点。     

Optimal nodal flyby with near-Earth asteroids using electric sail

The aim of this paper is to quantify the performance of an Electric Solar Wind Sail for accomplishing flyby missions toward one of the two orbital nodes of a near-Earth asteroid. Assuming a simplified, two-dimensional mission scenario, a preliminary mission analysis has been conducted involving the whole known population of those asteroids at the beginning of the 2013 year. The analysis of each mission scenario has been performed within an optimal framework, by calculating the minimum-time trajectory required to reach each orbital node of the target asteroid. A considerable amount of simulation data have been collected, using the spacecraft characteristic acceleration as a parameter to quantify the Electric Solar Wind Sail propulsive performance. The minimum time trajectory exhibits a different structure, which may or may not include a solar wind assist maneuver, depending both on the Sun-node distance and the value of the spacecraft characteristic acceleration. Simulations show that over 60% of near-Earth asteroids can be reached with a total mission time less than 100 days, whereas the entire population can be reached in less than 10 months with a spacecraft characteristic acceleration of 1 mm/s².     

电缆网阻值测试仪的设计与实现

随着单片机技术的发展及其在测试领域的广泛应用,早期采用的人工作业对电缆网性能测定的方法已经不再适用。本文介绍了一种基于单片机技术的电缆网阻值测试仪。从电缆网阻值测试仪的功能与设计要求出发,阐述了总体设计方案,说明了该套设备的工作原理,描述了系统的硬件实施和软件设计,并对整套设备进行了实验验证。结果表明：设备满足了用户要求,提高了测试效率。     

Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.     

压电阻抗技术用于铝板损伤检测的实验研究

为了实现对金属铝板的损伤检测,从而为航空装备提供高效、可靠的维修检测技术保障。介绍了压电阻抗技术用于结构损伤检测的基本原理,并以含裂纹铝合金圆片为对象开展了实验研究和深入探讨。研究结果表明,高频激励下,可以通过PZT电阻抗实部响应曲线谱的变化来识别结构损伤。同时引入了不同损伤下,PZT电阻抗实部相关系数偏差（1-R2）,以（1-R2）3来定义损伤指数,从而实现了损伤初步定量估计。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

电动汽车的振动分析

对电动汽车的振动问题进行仿真分析。新型电动汽车的开关磁阻电动机由于结构简单、成本低、效率高、启动性能好等优点,在电动汽车上得到了广泛的应用。缺点主要是由于转矩波动引起的振动较大,易产生噪声,进而使车辆的舒适性和平顺性降低。     

基于SOC的卫星姿轨控系统通用电模拟器设计

在某型卫星地面电联试过程中,对该卫星的姿态轨道控制系统进行接口分析及信号统计,针对其接口复杂性、信号多样性的特点,提出采用片上系统(Systemona Chip,SOC)芯片对所有部件模拟器进行通用化设计。文中给出了该型卫星通用型电模拟器硬件平台设计方案以及陀螺、反作用轮和通用接口模块的硬件配置说明,针对该型卫星姿态轨道控制系统电联试要求,对所有部件按真实接口配置成电模拟器,形成通用接口箱、敏感器电模拟器箱和执行机构电模拟器箱,并通过CAN(Controller Area Network)总线接入闭环仿真,对太阳捕获、地球捕获及正常模式进行了仿真测试,仿真结果表明通用电模拟器满足设计要求,对其他卫星的地面电联试有很好的参考价值。