Laboratory calibration measurements of a piezoelectric lead zirconate titanate cosmic dust detector at low velocities

A cosmic dust monitor for use onboard a spacecraft is currently being developed using a piezoelectric lead zirconate titanate element (PZT). Its characteristics of the PZT sensor is studied by ground-based laboratory impact experiments using hypervelocity particles supplied by a Van de Graaff accelerator. The output signals obtained from the sensor just after the impact appeared to have a waveform that was explicitly related to the particle’s impact velocity. For velocities less than ∼6 km/s, the signal showed an oscillation pattern and the amplitude was proportional to the momentum of the impacting particle. For higher velocities, the signal gradually changed to a single waveform. The rise time of this single waveform was proportional to the particle’s velocity for velocities above ∼6 km/s. The present paper reports on results for the low velocity case and especially discusses the effect of an outer coating of the sensor with a paint, which is used to reduce heating by solar radiation.     

Catalytic activity of interstellar grains: Formation of molecular hydrogen on amorphous silicates

Silicates constitute an important class of interstellar grain material and are the site of catalytic activities, most notably the formation of molecular hydrogen. Here we report an analysis of experiments conducted in the laboratory to measure the efficiency of formation of molecular hydrogen on amorphous silicates, a realistic analogue of interstellar dust grains. From the measurements, we also obtain the energetics of key processes in the reaction and information on the mechanism of reaction. Comparison with earlier measurements of molecular hydrogen formation on a sample of polycrystalline olivine shows that amorphous materials are more efficient catalysts.     

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

One of the highest-priority issues for a future human or robotic lunar exploration is the lunar dust. This problem should be studied in depth in order to develop an environment model for a future lunar exploration. A future ESA lunar lander mission requires the measurement of dust transport phenomena above the lunar surface. Here, we describe an instrument design concept to measure slow and fast moving charged lunar dust which is based on the principle of charge induction. LDX has a low mass and measures the speed and trajectory of individual dust particles with sizes below one micrometer. Furthermore, LDX has an impact ionization target to monitor the interplanetary dust background. The sensor consists of three planes of segmented grid electrodes and each electrode is connected to an individual charge sensitive amplifier. Numerical signals were computed using the Coulomb software package. The LDX sensitive area is approximately 400 cm². Our simulations reveal trajectory uncertainties of better than 2° with an absolute position accuracy of better than 2 mm.     

空间尘埃等离子体中尘粒电荷的相关涨落对尘埃磁声波的影响

本文运用自洽的三流体方程组, 考虑了尘埃的充电过程, 得到均匀磁化尘埃等离子体中垂直于磁场传播的尘埃磁声波的色散关系, 结合空间环境讨论了尘埃电荷的相关涨落对尘埃磁声波的影响.      

南昌市城区大气污染物变化规律分析

本文通过对南昌市城区空气监测数据的统计结果,总结出了城区内大气污染物的变化规律,并对造成这一变化规律的原因进行分析,找出了有关污染特征,并提出减轻或消减城区大气污染的思路,为环境规划提供科学的依据。     

Sensor calibration impacts on dust detection based on MODIS and VIIRS thermal emissive bands

Dust detection using remotely sensed measurements has been one of the challenging problems encountered by atmospheric scientists. MODerate Resolution Imaging Spectroradiometer (MODIS) on the Terra (T) and Aqua (A) platforms have been a versatile sensor for well over 21 and 18 years respectively, and have been extremely useful in the retrieval of aerosol information over the entire globe. The MODIS radiances from the Level 1B in general are expected to be within 5% accuracy in the reflective wavelengths and within 1% in the thermal emissive wavelengths. In this paper, we evaluate the sensitivity of previously developed dust detection technique based on thermal emissive wavelengths, which correspond to MODIS bands 20, 29, 31, and 32 respectively. The Thermal Emissive Dust Index (TEDI) performed very comparably to the traditional Aerosol Optical Thickness (AOT) retrievals by MODIS reflective channels. Since the MODIS Thermal Emissive Bands (TEB) are well calibrated on-orbit using a BlackBody (BB) source, the calibration of these long wave infrared bands is quite robust. As A-MODIS continues to perform well beyond its designed lifetime of 6 years, the instrument has undergone various levels of degradation during its mission time. As a consequence, it is imperative to check the impacts of calibration on the higher-level retrievals. In this paper, we rigorously analyze the sensitivity of TEDI due to the impact of calibration by the afore-mentioned TEB. The perturbation of the dominant (linear) calibration term demonstrated the following: first, there was a correlation in the sensitivity of the TEDI due to the uncertainty in the linear calibration term. Based on a perturbation in the linear calibration term for all aforementioned bands over a range of ±5% yielded the TEDI sensitivity to vary from approximately ?3.2% to about ?3.6%. When considering the uncertainty in each individual band significant changes were observed. The least change was observed for the perturbation in the calibration of band 20 with the TEDI sensitivity and the largest sensitivity in TEDI was observed in the perturbation of band 31 calibration. Thus, in the case of TEDI, noticeable sensitivity due to calibration uncertainty was observed in bands 29, 31, and 32, reiterating the importance of the TEB calibration in these bands. Also, the dust detection scheme based on A-MODIS was successfully transferred to the follow-on sensors such as Suomi (SNPP) and NOAA 20 (N20) VIIRS. The results presented in this paper would be extremely helpful in understanding impacts of calibration on the higher-level products for both current and future missions based on the MODIS heritage. Finally, the work also identifies the importance of radiometric fidelity in maintaining the accuracy of the dust detection. Results presented will show drastic improvement of the Saharan dust detection after the reduction of the electronic crosstalk in the 8.5 µm channel of T-MODIS.     

The nature of the luminous blue variable AG carinae

After many years of permanence at minimum, the luminous blue variable AG Car started in mid 1990 a new brightening phase. We review the spectroscopic variations of the star since 1949, and discuss the nature of the circumstellar nebula. We give evidence that, like in Car, also in AG Car dust is continuously condensing from the stellar wind. We suggest that the star could be partially reddened by the circumstellar dust, which could affect the estimates of the stellar distance. An extended HII halo is present outside the ring nebula, which should be associated with the wind of a previous cooler evolutionary stage of AG Car.     

An engineering model of Titan surface winds for Dragonfly landed operations

Winds near the ground on Titan for the Dragonfly landing site (near Selk crater, 10°N) for the mid-2030s (Titan late southern summer, L_s ~ 310°) are estimated for mission design purposes. Prevailing winds due to the global circulation are typically 0.5 m/s, and do not exceed 1 m/s. Local terrain-induced flows such as slope winds appear to be similarly capped at 1 m/s. At various landing sites and times, these two contributions will vectorially combine to yield steady winds (for part of a Titan day, Tsol) of up to 2.0 m/s, but typically less – the slope wind component will be small in the mid-morning. In early afternoon, as on Earth and Mars, solar-driven convection in the planetary boundary layer will cause wind fluctuations of the order of 0.1 m/s, varying with a typical timescale of ~1000 s. Occasionally this convection organizes into coherent ‘dust devil’ vortices: detectable vortices with speeds of 1 m/s are predicted about once per Titan day. We have introduced the convective velocity scale combined with the advection time of PBL cells as a metric to derive the frequency of occurrence of gusts associated with convective vortices (‘dust devils’). Maximum possible vortex winds on Titan of 2.8 m/s may be expected only once per 40 Tsols, and define the maximum wind (4.8 m/s at 10 m height) that Dragonfly must tolerate without damage. The applicability of different wind combinations, scaled to the height of relevant Dragonfly components above the ground (e.g. the maximum corresponds to 3.9 m/s at 1.3 m height) by a logarithmic wind profile, to Dragonfly design and operations are discussed.     

太空中的PM2.5——太阳系尘埃动力学研究进展

对太阳系尘埃动力学所涉及到的基本内容进行概述，包括尘埃的种类、成分、尺寸、密度、形状和生命周期。介绍了近年来在尘埃的来源与生成机制方面的力学过程、主要理论、模型与方法，包括冲击溅射、表面喷射、风化、滑坡、质量脱落、旋转断裂等，阐述了尘埃的充电过程与磁场环境，简要概述了航天任务的尘埃探测结果，介绍了尘埃受力模型、单个尘埃颗粒的运动以及大量尘埃的分布特征、动力学现象及内在规律方面的最新研究结论。最后对太阳系尘埃动力学领域的未来发展趋势进行了展望。     

液压系统油液污染的危害及控制方法

本文论述了液压油液污染的来源和危害,控制污染的方法以及国内对液压油液污染控制的发展趋势。