A novel none once per revolution blade tip timing based blade vibration parameters identification method

The vibration caused blade High Cycle Fatigue (HCF) is seriously affects the safety operation of turbomachinery especially for aero-engine. Thus, it is crucial important to identify the blade vibration parameters and then evaluate the dynamic stress amplitude. Blade Tip Timing (BTT) method is one of the promising method to solve these problems. While, it need a high resolution Once Per Revolution (OPR) signal which is difficult to get for the aero-engine. Here, a Coupled Vibration Analysis (CVA) method for identifying blade vibration parameters by a none OPR BTT is proposed. The method assumes that every real blade has its own vibration performance at a given speed. Whereby, it can take any blade as the reference blade, and the other blades using the reference blade as the OPR for vibration displacement calculating and further parameter identifying. The proposed method is validated by numerical model. Also, experimental studies are carried out on a straight blade and a twisted three dimensional blade test rig as well as a large industrial axial compressor respectively. The results show that the proposed method can accurately identify the blade synchronous vibration parameters and quantitatively evaluate the mistuning in bladed disks, which lays a foundation for the reliability improvement of aero-engine.     

双向不对称同步数据业务接入设计

根据数据传输设备业务板卡功能特点,采用2个端口绑定的方式解决了双向不对称同步数据业务接入问题,针对链路调试过程中出现的数据传输不稳定现象,通过测试接口信号波形质量和时序关系,发现发送定时信号占空比及其与发送数据间的时序关系不符合相关标准要求,分析对此产生的影响并提出相应解决方案。通过对不同方式实施效果的分析评估,确定了设备连接状态,实际测试验证与理论分析结果完全相符,提高了传输的稳定性和可靠性,并在重要数据传输工程中得到应用,可为解决同步数据传输不稳定问题提供参考。     

General Relativity Accuracy Test (GReAT): New configuration for the differential accelerometer

We presents the results of an activity concerning the test of the Einstein Weak Equivalence Principle with an accuracy of about 5 × 10⁻¹⁵. The experiment will be performed in an “Einstein elevator” using a differential accelerometer with a final sensitivity of about 10⁻¹⁴ g_⊕/Hz^1/2. The differential accelerometer is spun about an horizontal axis at a frequency in the range 0.5–1 Hz in order to modulate, during the free fall, the signal from a possible violation of the Equivalence Principle. In the paper the perturbing effects with the same signature of the possible violation are analyzed and constrained. The experimental results obtained in the laboratory with a first prototype of the differential accelerometer are discussed, comparing this results with those obtained using a new prototype.     

Crab脉冲星标准脉冲轮廓更新对计时精度的改进

对于脉冲星试验01星的两年实测数据，针对蟹状星云脉冲星星历经历了多次更新的特点，提出了更新标准脉冲轮廓进行X射线计时的改进方法。以一系列观测时长为实测数据分组，再采用改进后的方法进行计时分析并与改进前的结果进行对比。通过对比改进前后的计时结果，发现改进方法得到的计时残差的均方根(root mean square, RMS)平均降低了14.2%，定位精度平均提高了14.4%，估计原子钟相对频率偏差的精度平均提高了26.2%，体现了改进方法处理经历多次星历更新的Crab脉冲星观测数据的合理性和优越性。此外，改进方法对脉冲星试验01星两年观测数据的稳定度σz没有量级上的改进，说明改进方法对Crab脉冲星时间稳定度的影响不大。     

A high order method for orbital conjunctions analysis: Sensitivity to initial uncertainties

A high order method to quickly assess the effect that uncertainties produce on orbital conjunctions through a numerical high-fidelity propagator is presented. In particular, the dependency of time and distance of closest approach to initial uncertainties on position and velocity of both objects involved in a conjunction is studied. The approach relies on a numerical integration based on differential algebraic techniques and a high-order algorithm that expands the time and distance of closest approach in Taylor series with respect to relevant uncertainties. The modeled perturbations are atmospheric drag, using NRLMSISE-00 air density model, solar radiation pressure with shadow, third body perturbation using JPL’s DE405 ephemeris, and EGM2008 gravity model. The polynomial approximation of the final position is used as an input to compute analytically the expansion of time and distance of closest approach. As a result, the analysis of a close encounter can be performed through fast, multiple evaluations of Taylor polynomials. Test cases with objects ranging from LEO to GEO regimes are considered to assess the performances and the accuracy of the proposed method.     

时序信号设计的一种新方法

文章结合高速时序工作的特点，从实现的角度提出了一种利用软件调整时序的新方法。在可编程逻辑器件中，利用数字时钟管理器（DCM），通过模块化和增量式设计思想达到对高速时序信号的精确调节。最终实现了一个20MHz速率的时序控制，调节精度达到100ps。     

非线性解耦控制与飞机敏捷性机动

首先介绍了以微分几何控制理论为基础的非线性系统解耦理论，给出了解耦控制律的综合方法及解耦闭环系统平衡点的计算方法，并对解耦系统的稳定性进行分析，随后用非线性解耦理论研究了飞机非线性运动的三种解耦运动模式，并讨论了飞机非线性解耦控制规律的线性近似解，最后用飞机非线性运动的三种解耦运动模式实现了三种形式的敏捷性机动，结果是满意的。为飞机敏捷性，直接力控制和过失速机动问题提供了一种理论研究方法。     

作息时间与广播自动控制系统的研制

采用PLC控制与CMMS4040制成的时钟脉冲发生器相结合的方式，研制开发了作息时间与广播自动控制系统，成功地应用于烟草行业作息时间与广播的控制中。     

非线性飞行控制方法研究概述

原理性地给出目前常用的几种非线性飞行控制方法，即：数值优化法，动态逆设计方法，微分几何法和滑态变结构设计方法，指出了非线性飞行控制提高战斗机机支动性和敏捷性有重要作用，同时也介绍了这几种方法在非线性飞行控制中应用情况。     

雷达测量时标误差修正模型研究

研究了任务中出现的雷达测量时标误差现象，用数据比对及差分法对该问题进行分析，采用面积及残差方差最优的方法确定时标误差的采样点数，利用提出的方法分析并解决了跟踪雷达测量数据可能出现的时标误差问题，验证了方法的正确性和有效性。