基于CATIA/CAA的四轴自动钻铆定位系统干涉检测编程方法研究及应用

干涉检测是自动钻铆加工前的重要准备工作,全文分别通过几种不同的干涉检测方法实现了运动仿真中的干涉检测,通过对各自方法取得的实际效果进行对比分析,得出通过基于CAAC++的方式调用CATIA自有的干涉检测功能不仅运算速度快、干涉检查信息全,并且程序运行稳定,效果最好,同时应用于开发的四轴数控托架仿真系统,辅助自动钻铆机生产加工,具有较广泛的应用前景。     

基于MHSS算法的ARAIM完好性和可用性预测

传统的接收机自主完好性监视只能提供非精密进近阶段的完好性监视,无法实现对完好性要求更加严格的飞行阶段的监视,而高级接收机自主完好性监视（AdvancedReceiverAutonomousIntegrityMonitoring,ARAIM）可以在精密进近阶段为飞机提供满足航向信标性能垂直引导（LocalizerPerformancewithVerticalguidance,LPV）的完好性监视服务。文章基于多假设分组解算法,根据目前的星座环境,结合民航不同飞行阶段的应用需求,对ARAIM算法进行仿真研究。针对水平保护级（HorizontalProtectionLevel,HPL）和垂直保护级（VerticalProtectionLevel,VPL）的指标,在不同星座组合环境下,选取南北半球不同经纬度的5个观测机场,分别仿真了HPL和VPL的变化情况,并对全球HPL和VPL平均分布趋势,以及以99%的概率满足LPV-200进近可用性指标时,ARAIM可用性的全球覆盖率进行了仿真预测分析。仿真结果表明,不论是全球定位系统和格洛纳斯双星座还是增加北斗卫星导航系统后的三星座,5个观测机场的HPL和VPL均能满足LPV-200进近对完好性指标的要求;但在全球范围内,双星座条件下,ARAIM并不能完全支持LPV-200进近对完好性监视的要求,而三星座则可大大提高ARAIM的可用性,为民航用户提供满足精密进近的所需导航服务性能。     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

卫星遥感影像外方位元素的误差传播研究

高分辨率卫星遥感影像的几何定位精度与影像外方位元素精度密切相关.文章针对单景影像直接对地定位和立体影像前方交会定位两种典型情况,对影像各外方位元素在目标几何定位中的误差传播规律进行分析比较,相关结论可供卫星姿控及相机载荷设计方参考.     

Tomographic reconstruction of the ionospheric electron density as a function of space and time

Electron density distribution is the major determining parameter of the ionosphere. Computerized Ionospheric Tomography (CIT) is a method to reconstruct ionospheric electron density image by computing Total Electron Content (TEC) values from the recorded Global Positioning Satellite System (GPS) signals. Due to the multi-scale variability of the ionosphere and inherent biases and errors in the computation of TEC, CIT constitutes an underdetermined ill-posed inverse problem. In this study, a novel Singular Value Decomposition (SVD) based CIT reconstruction technique is proposed for the imaging of electron density in both space (latitude, longitude, altitude) and time. The underlying model is obtained from International Reference Ionosphere (IRI) and the necessary measurements are obtained from earth based and satellite based GPS recordings. Based on the IRI-2007 model, a basis is formed by SVD for the required location and the time of interest. Selecting the first few basis vectors corresponding to the most significant singular values, the 3-D CIT is formulated as a weighted least squares estimation problem of the basis coefficients. By providing significant regularization to the tomographic inversion problem with limited projections, the proposed technique provides robust and reliable 3-D reconstructions of ionospheric electron density.     

空间目标一维距离像重构的线性规划方法

高分辨一维距离像是空间目标故障诊断与识别的重要手段。针对典型的空间目标 ,文章采用稀疏成份分析法研究了一维距离像的超分辨重构和特征提取问题。将处理实信号的基寻踪方法推广到复信号 ,并利用约束最小二乘解提出了一种次优的距离像重构算法 ,实现了空间目标散射中心的有效分离。数值结果验证了其合理性和有效性。     

同温层气球平台反向定位系统的研究

反向定位系统是针对驻留型同温层气球平台的一种新型定位系统 ,该系统的基本原理是由接收站的位置计算得出发射机的位置。文章采用卡尔曼滤波的方法 ,建立了反向定位系统的模型 ,给出其滤波算法 ;鉴于地面接收站的位置选择对该系统的定位精度有较大的影响 ,给出地面站选址依据 ,并通过计算、仿真获得一组较为理想的布站方式。此外 ,钟差是系统的一个主要误差源 ,文中对其引起的定位误差进行了分析 ,并给出估算的方法 ;对系统中的传播误差、设备误差也进行了分析。最后 ,对系统建立了仿真模型进行仿真。结果表明 ,该定位系统具有较好的定位精度     

卫星导航定位方程的病态条件

定位精度因子(PDOP)上限取值是导航星座设计及其性能评价的基本依据。本文系统地论述卫星导航定位方程及其精度评定算法以及线性方程病态条件,通过实测和仿真数值试验结果对比分析,详细论证PDOP与卫星导航定位方程病态条件的关系,进而确定PDOP上限取值,以满足实际工程应用需求。     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

基于虚拟现实的动态设计及系统实现

该文首先介绍了虚拟现实和动态设计的发展和应用，然后构造了系统的基本实现思想和框架，具体实现了虚拟环境与可视化模型、动态设计数据处理与存取以及驾驶式计算系统的跟踪与控制过程等。最后成功的将该系统应用于浸水圆柱壳结构优化设计并总结出在虚拟环境中进行动态设计的优点。