A novel method for destriping of OCM-2 data and radiometric performance analysis for improved ocean color data products

Despite the capability of Ocean Color Monitor aboard Oceansat-2 satellite to provide frequent, high-spatial resolution, visible and near-infrared images for scientific research on coastal zones and climate data records over the global ocean, the generation of science quality ocean color products from OCM-2 data has been hampered by serious vertical striping artifacts and poor calibration of detectors. These along-track stripes are the results of variations in the relative response of the individual detectors of the OCM-2 CCD array. The random unsystematic stripes and bandings on the scene edges affect both visual interpretation and radiometric integrity of remotely sensed data, contribute to confusion in the aerosol correction process, and multiply and propagate into higher level ocean color products generated by atmospheric correction and bio-optical algorithms. Despite a number of destriping algorithms reported in the literature, complete removal of stripes without residual effects and signal distortion in both low- and high-level products is still challenging. Here, a new operational algorithm has been developed that employs an inverted gaussian function to estimate error fraction parameters, which are uncorrelated and vary in spatial, spectral and temporal domains. The algorithm is tested on a large number of OCM-2 scenes from Arabian Sea and Bay of Bengal waters contaminated with severe stripes. The destriping effectiveness of this approach is then evaluated by means of various qualitative and quantitative analyses, and by comparison with the results of the previously reported method. Clearly, the present method is more effective in terms of removing the stripe noise while preserving the radiometric integrity of the destriped OCM-2 data. Furthermore, a preliminary time-dependent calibration of the OCM-2 sensor is performed with several match-up in-situ data to evaluate its radiometric performance for ocean color applications. OCM-2 derived water-leaving radiance products obtained after calibration show a good consistency with in-situ and MODIS-Aqua observations, with errors less than the validated uncertainties of ±5% and ±35% endorsed for the remote-sensing measurements of water-leaving radiance and retrieval of chlorophyll concentrations respectively. The calibration results show a declining trend in detector sensitivity of the OCM-2 sensor, with a maximum effect in the shortwave spectrum, which provides evidence of sensor degradation and its profound effect on the striping artifacts in the OCM-2 data products.     

无人机编队支撑网络的协同通信中继策略

针对无人机编队支撑网络优化选择中继成员进而提高编队协同通信能力问题，基于端到端技术（Device-to-Device，D2D），提出了一种同时考虑无人机编队成员的邻近域及编队成员间的社会性依存关系来优化选择中继成员的中继策略，旨在既能保证无人机编队的基本通信能力，又能同时优化提高编队的吞吐量，从而进一步提升编队支撑网络的整体性能。研究结果表明，所提的无人机编队支撑网络中继成员优化选择策略在系统吞吐量方面较已有方法具有明显优势。     

磁悬浮斜翼节静动态特性

作为直动式电-机械转换器和二维阀本体之间的连接桥梁，反馈放大机构起着位置反馈、运动转换和推力放大的重要作用。但现有二维伺服比例阀的机械式反馈放大机构都存在摩擦磨损等非线性环节，对阀的静态特性影响明显。基于永磁悬浮技术提出一种新型的无接触式磁悬浮斜翼节，其依靠磁斥力将斜翼动子和阀芯悬浮在中位，同时实现位置反馈和运动转换功能，以彻底去除传统机械式反馈放大机构由于接触带来的摩擦磨损等因素对阀控制特性的不利影响。首先基于电磁场理论建立了磁悬浮斜翼节的数学解析模型，讨论了关键结构参数对磁力矩的影响；随后在Maxwell和Adams平台上分别对其静动态特性进行了基于有限元模拟和多体运动学分析的参数优化，在此基础上制作了实验样机，搭建实验台架研究了斜翼节的静动态特性，从而验证了其工程实用性。仿真和实验结果基本相符，3种验证的斜翼节样机中，当外接比例电磁铁推动外动子移动3 mm时，最大磁力矩可达到0.252 N·m，阶跃响应时间约120 ms。参数化设计表明减小工作气隙和增加斜翼节倾角均能提升斜翼节的磁力矩和动态响应，而在气隙中添加磁流体可提升磁力矩，但同时影响阶跃响应。研究工作对于后续磁悬浮斜翼节在二维伺服比例阀上的实际应用具有重要的参考价值。     

40CrNi2Si2MoVA钢机械加工与喷丸试样旋转弯曲疲劳寿命的预测方法

为了预测机械加工及喷丸强化后40CrNi2Si2MoVA钢试样在室温下的旋转弯曲疲劳寿命,结合商用有限元软件ABAQUS和疲劳寿命分析软件FE-SAFE对不同数值计算方法的适用性及准确性进行比较,提出了喷丸强化40CrNi2Si2MoVA钢的寿命预测经验公式。结果表明:对于机械加工试样,选择"Brown-Miller"算法和表面残余应力用于计算可获得比较准确的预测结果;对于喷丸强化试样,高应力水平下也可选用"Brown-Miller"算法及表面残余应力,而低应力水平下则应改用"Stress-based Brown Miller"算法及最大残余应力。基于上述两种方法提出的经验公式:σmax=–64.378·lgN+1449.268,可改善40CrNi2Si2MoVA钢喷丸强化试样疲劳寿命预测的准确性。     

A statistical study of the F2 layer stratification at the northern equatorial ionization anomaly

Ionograms recorded at Puer station (PUR, 22.7°N, 101.05°E, Dip Latitude 12.9°N) in the Southwest of China from January 2015 to December 2016 were used to study characteristics of the F2 layer stratification at the northern equatorial ionization anomaly. Ionosonde observations show that the development of the F2 layer stratification is different under different conditions. Both the upward and downward movement of the F2 layer stratification could be observed. The F2 layer stratification could occur both at daytime and nighttime. The new cusp could originate from different positions on ionograms. Moreover, statistical results indicate that the F2 layer stratification occurred later in the winter than in other seasons at daytime, it occurred frequently in the local spring, and most of ionograms with the F2 layer stratification at post-midnight occurred in March and April. Our results also show that the F2 layer stratification has a correlation with solar activity.     

面对面呼吸飞沫传播和防护的流体力学初步分析

针对SARS-CoV-2疫情,围绕病人和戴防飞沫面罩的健康人面对面呼吸状态下飞沫的流动传播问题,利用计算流体力学方法进行了数值模拟。首先采用二维非稳态不可压缩雷诺平均N-S方程描述平均流场,计算区域采用H型结构网格拓扑结构,将多相流的欧拉模型用于描述空气-飞沫流动,湍流脉动采用RNG k-ε湍流模型。计算获得了呼吸飞沫喷射速度、粒径和入口含量对飞沫流动传播的影响规律,分析了水平传播线和垂直传播线的飞沫浓度分布。研究表明:呼吸飞沫喷射速度、入口含量和流动传播速度、浓度分布呈正相关性,粒径主要影响飞沫流动传播的浓度峰值大小;呼吸飞沫跟随空气流动先以水平传播为主,后转变为以垂直扩散为主,扩散过程会形成“猫眼”状飞沫云团;呼吸飞沫在气流作用下侵入到防飞沫面罩内形成旋涡,导致防飞沫面罩的失效,因此,防飞沫面罩必须结合口罩共同使用。     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

一种适用于情报图像处理的图像集分类算法

无人机情报处理系统是无人机地面控制系统的重要组成部分之一，主要负责对无人机侦察载荷下传的侦察情报进行处理，从复杂的情报中获得直观的情报产品并传递给上级和友邻单位。对于搭载光电载荷的无人机情报处理当前仍以依靠人力鉴别为主。介绍一种基于快速近似最近邻( FLANN) 搜索特征的K 近邻用分类决策，可去除背景信息对分类性能的影响；为了进一步提高算法的运行速度及减少算法的内存开销，采用特征选择的方式分别减少测试图像和训练图像集的特征数目，并尝试同时减少测试图像和训练图像集中的特征数目平衡分类正确率与分类时间之间的矛盾。该算法保留了原始NBNN 算法的优点，无需参数学习的过程，实验结果验证了算法的正确性和有效性。     

CE5T拓展试验轨道精度分析

针对嫦娥5T服务舱(CE5T)拓展试验中的绕地大椭圆轨道，分析了轨道动力学演化趋势，通过测轨数据类型组合策略分析了统一S频段测量(USB)和甚长基线干涉测量(VLBI)在定轨中的贡献，得到了百米级的精密定轨精度；针对地月第二平动点(L2)绕飞轨道，分析了地心和月心积分的轨道动力学差异，制定了精密定轨的参数求解策略，得到了百米级的精密定轨精度；针对月球交会对接轨道的特点，选取三种不同的重力场模型定轨，比较了三者在轨道预报和数据拟合的差异，并与嫦娥3号(CE3)环月轨道的定轨精度进行比对，验证了不同重力场的适用范围，从计算精度和效率两方面制定了优化的定轨策略。     

低温变形对2A14铝合金组织性能影响

提出了低温变形与热处理协同的2A14铝合金强韧化新方法,借助透射电镜、扫描电镜、金相显微镜、拉伸试验机等测试手段对比分析了室温和超低温变形工艺对2A14铝合金组织性能的影响。结果显示:与室温变形相比,超低温变形与热处理协同能够大幅提升合金综合力学性能。当超低温变形量达到20%,合金内部位错密度上升,第二相粒子尺寸更小,分布更为均匀,晶粒细化显著,合金综合力学性能达到最高,抗拉强度为474.5 MPa,屈服强度为426.5 MPa,延伸率为11.6%。