Cutting force prediction for circular end milling process

A deduced cutting force prediction model for circular end milling process is presented in this paper. Traditional researches on cutting force model usually focus on linear milling process which does not meet other cutting conditions, especially for circular milling process. This paper presents an improved cutting force model for circular end milling process based on the typical linear milling force model. The curvature effects of tool path on chip thickness as well as entry and exit angles are analyzed, and the cutting force model of linear milling process is then corrected to fit circular end milling processes. Instantaneous cutting forces during circular end milling process are predicted according to the proposed model. The deduced cutting force model can be used for both linear and circular end milling processes. Finally, circular end milling experiments with constant and variable radial depth were carried out to verify the availability of the proposed method. Experiment results show that measured results and simulated results corresponds well with each other.     

基于序优化理论的晕轨道转移轨道设计

利用晕轨道的稳定流形可以设计从地球到晕轨道的转移轨道。但由于小幅度晕轨道的稳 定流形与地球停泊轨道无法相交,因此需采用两脉冲转移。微分修正法是求解两脉冲转移常 用的优化方法,虽然收敛速度快,但很难获取全局最优解,而且收敛半径小,如果初始猜想 与最优解相差很远,该方法可能会不收敛。将序优化理论与微分修正法相结合,利用序优化 思想缩小搜索空间,得到足够好的初始猜想,然后利用微分修正法快速收敛到满足终端精度 要求的解。仿真结果表明该方法有很好的收敛性,且计算量小。
     

周期性变截面微通道热沉内流体流动与传热特性

以去离子水为冷却工质,对周期性变截面微通道热沉内流体流动与传热特性进行了实验研究.获得了流体流过周期性变截面微通道热沉内的摩擦阻力系数、Nu数、不同热流密度下的加热膜温度、热阻和泵功的关系,并与传统直通道进行比较分析,结果显示周期性变截面微通道热沉由于流体冲击肋侧壁,增加了局部阻力,导致消耗的泵功增加,但换热能力却有了显著的提高,壁面温差减小,具有非常优越的换热性能,能够满足高热流密度微电子器件冷却的需要.      

速度信息缺失的平动点轨道交会预设性能控制

以平动点轨道的交会对接为研究背景,基于高阶积分链微分器和预设性能控制理论提出了一种仅需相对位置信息的平动点轨道近程交会控制律。首先利用高阶积分链微分器估计两航天器的相对速度状态,并设计预设性能控制器使得两航天器的相对运动状态在预设的边界内渐近收敛到期望状态。然后利用李雅普诺夫函数证明相对运动状态存在扰动时控制器的稳定性。该方法为闭环控制,且与模型无关,容易在线操作。仿真结果表明,在平动点轨道航天器存在未知扰动以及导航制导等不确定的情况下,利用所提交会控制律能够实现追踪航天器与目标航天器交会任务的高精度实时控制,具有较强鲁棒性。     

考虑摩擦的周边桁架式可展天线展开动力学分析

结合一种周边桁架式可展天线的模型制作,介绍了该类天线的总体布局、展开收纳机理和设计要点;然后提出了切实有效的数学算法,有效地构造了约束方程及其Jacobi矩阵,实时地模拟了结构收纳过程的约束条件,采用广义逆矩阵的方法分析了周边可展桁架运动过程;研究了摩擦这一非线性因素在其展开过程中的作用机理,建立其展开动力学模型,实现了考虑摩擦的周边桁架式可展天线结构展开动力学分析.编制了仿真程序进行算例分析,验证了分析方法的有效性.      

复合材料耳片接头承载能力试验

对各种不同铺层碳纤维复合材料耳片接头进行了拉伸、剪切和弯曲试验。本文详细地论述了这三种试验的测试过程。通过环绕铺层对复合材料耳片接头承载能力增强效果的研究，确定了不同铺层参数下耳片接头的拉伸、剪切和弯曲承载能力及破坏模式，为耳片接头设计及强度分析提供了数据。     

Design and analysis of a direct transfer trajectory from a near rectilinear halo orbit to a low lunar orbit

A near rectilinear halo orbit (NRHO) is regarded as a potential orbit for a future deep space station that can effectively support sustainable crewed lunar exploration missions. In this paper, the L₂ southern NRHOs are selected as the research object, and a direct transfer trajectory from an NRHO to a low lunar orbit (LLO) is designed and analyzed. First, based on the circular restricted three-body problem, the characteristics of NRHOs are discussed including geometric behaviour, stability and synodic resonance. Second, optimal direct transfer trajectories are obtained by combining a local gradient optimization with a numerical continuation strategy. A reachable domain calculation model is established. Finally, simulations are carried out to verify the feasibility of the trajectory design method. The relationship between the velocity change and the reachable domain is further analysed through simulation calculations.     

Venus transfer design by combining invariant manifolds and low-thrust arcs

The design of interplanetary trajectories based on patched circular restricted three body models is gradually becoming a valuable alternative to the classical patched conic approach. The main advantage offered by such a model is the possibility to exploit the manifold dynamics to move naturally far from or toward a body. Generally, propulsive maneuvers are required to match these structures. Low-thrust arcs offer the possibility to have a significant propellant mass reduction when moving from manifold to manifold. The aim of this paper is to present a methodology to design low-thrust trajectories between two planetary orbits connecting the manifolds of two circular three body systems. The approach is based on a grid search on the main parameters governing the solution to identify those trajectories moving within the manifold images on given Poincarè sections. The value of the Jacoby constant of the target libration point periodic orbit is chosen as stop condition for the thrusting phases. Ballistic arcs follow up to the proper Poincarè section intersection. A grid search for an Earth to Venus transfer is presented as test case.     

圆形薄膜太阳翼展开动力学分析与模态分析

针对圆形薄膜太阳翼展开过程中存在的柔性大、非线性强、耦合程度高以及展开过程复杂等问题,本文以UltraFlex太阳翼为研究对象,使用膜单元模拟翼面,相比于壳单元获得了更好的展开效果,利用非线性有限元软件SAMCEF对其展开过程进行动力学仿真分析,通过分析系统展开过程中能量变化曲线,研究不同转角驱动函数对其展开稳定性的影响。对圆形薄膜太阳翼展开锁定状态进行模态分析,与NASA的ANSYS分析结果相一致。将分析结果与NASA UltraFlex样机试验结果进行对比,模态频率误差在6.77%以内,符合美国TRL6技术标准,验证了SAMCEF有限元数值仿真模型的准确性和有效性,具有一定的工程实际意义。