飞机/外挂物组合体绕流的数值计算

采用嵌合体埋入方法计算带外挂翼-身组合体复杂外形的流动,将飞机/外挂物外形的流动区域分为机翼-机身和外挂物两个子区域,在机翼-机身子域上求解欧拉方程,在外挂物子域上求解全速势方程,通过两个流场的耦合迭代计算全流场的解。对C-5A飞机及某战斗机的计算表明,数值模拟与实验吻合。实现了不同子域流场使用不同方程的计算方法。     

虚拟数控车削软件系统的研制

分析了虚拟数控车削加工中的技术难点和各种相关因素对加工的影响,建立了车屑、冷却液、车削力的数学模型,利用Visual C 语言和OpenGL技术,对在虚拟数控车削加工仿真环境下的车屑、冷却液、车削力进行了动态模拟。     

PTFE/CFRP/铝合金叠层材料钻削试验研究

对PTFE/CFRP/铝合金叠层材料进行了钻削试验研究。结果表明:最高钻削温度随主轴转速的增大而增大,但随进给量的增大反而下降;相同钻削参数下,从铝合金侧钻入能获得更低的钻削温度;采用较大的进给量有利于铝合金形成碎屑状切屑,避免带状切屑排出时划伤已加工CFRP表面;采用较低主轴转速和较大的进给量可获得更好的铝合金孔出口质量。     

Time-domain modeling of a cutter exiting a workpiece in the slot milling process

In a milling operation, there must be processes of a cutter entering and exiting the work-piece boundary. The cutter exit is usually in the feed direction and the dynamic response is different from that in the normal cutting process. This paper presents a new time-domain modeling of mechanics and dynamics of the cutter exit process for the slot milling process. The cutter is assumed to exit the workpiece for the first time with one tooth right in the feed direction. The dynamic chip thickness is summed up along the feed direction and compared with the remaining workpiece length in the feed direction to judge whether the cutter is ready to exit the workpiece or not. The developed model is then used for analyzing the cutting force and machining vibration in the cutter exit process. The developed mathematical model is experimentally validated by comparing the simulated forces and vibrations against the measured data collected from real slotting milling tests. The study shows that stable cutting parameters cannot guarantee stable cutting in a cutter exit process and further study can be performed to control the vibration amplitude in this specific process.     

智能结构中埋入式光纤传感器的研究

针对复合材料结构试件内部参量的测量提出了一种新型埋入式光纤传感器的研究方案。这种方案是采用双光敏管结构来检测干涉条纹的，运用适当的处理电路来计数条纹的移动量，并判断条纹的移动方向，从而测出复合材料构件内部物理参量的变化。对这种干涉型埋入式光纤传感器用于复合材料试件内部应变测量进行了理论推导，导出了条纹的移动量与应变的关系，并把这种传感器埋入环氧树脂复合材料梁中，对其应变进行了测量，给出了实验装置和     

电缆充气机控制系统的设计

本文较详细的介绍电缆自动充气机控制系统的组成及工作原理，重点论述压力、湿度传感器的调理电路，并给出系统工作的主程序。     

指纹IC卡及其应用

介绍指纹识别技术和 IC卡技术 ,结合实践经验提出指纹 IC卡的解决方案 ,最后讨论指纹 IC卡作为身份认证的应用。     

Feasibility study of creep feed grinding of 300M steel with zirconium corundum wheel

The ultrahigh strength 300M steel has been commonly used in the manufacture of aircraft landing gear and rotor shaft parts due to its excellent mechanical properties. Creep feed grinding is one of the essential operations during the whole component manufacturing processes. In this work, the feasibility of creep feed grinding of 300M steel by using the hard zirconium corundum wheel was theoretically and experimentally evaluated. A variety of responses including grinding forces, temperature fields...     

矩形薄板在不同边界条件下的固有振动分析

研究了在弹性支撑和弹性嵌固边界条件下,弹性矩形薄板固有振动特性的变化规律。利用单项梁函数组合法推导出矩形薄板在2种边界条件下的振型和固有频率的计算公式,应用此公式计算出弹簧系数的变化和薄板固有频率等特征的变化趋势,为分析实际悬臂板类结构振动的特征打下基础。     

一种改进的LLE算法在人脸表情分类的应用研究

局部线性嵌入是一种当今比较流行的流形学习算法,该算法能够实现对数据的有效降维。人脸表情有着复杂的纹理和形状特征,提取出的数据往往存在着大量的数据冗余,因此数据降维在人脸表情识别中有着重要的作用。本文针对局部线性嵌入对分布不均匀的数据不能有效降维的问题提出了改进算法,并应用在人类表情分类中,通过仿真实验分析,改进算法对人类表情图像具有良好的降维和分类效果。