某型机燃油增压异常的分析与研究

针对某型机开车后燃油系统输油时油箱增压存在异常的现象,结合该型机燃油系统通气增压原理,分析了该故障的可能原因,并通过地面试验最终排除故障。     

Automatic differentiation based discrete adjoint method for aerodynamic design optimization on unstructured meshes

A systematic methodology for formulating, implementing, solving and verifying discrete adjoint of the compressible Reynolds-averaged Navier-Stokes (RANS) equations for aerodynamic design optimization on unstructured meshes is proposed. First, a general adjoint formulation is con-structed for the entire optimization problem, including parameterization, mesh deformation, flow solution and computation of the objective function, which is followed by detailed formulations of matrix-vector products arising in the adjoint model. According to this formulation, procedural components of implementing the required matrix-vector products are generated by means of auto-matic differentiation (AD) in a structured and modular manner. Furthermore, a duality-preserving iterative algorithm is employed to solve flow adjoint equations arising in the adjoint model, ensur-ing identical convergence rates for the tangent and the adjoint models. A three-step strategy is adopted to verify the adjoint computation. The proposed method has several remarkable features:the use of AD techniques avoids tedious and error-prone manual derivation and programming;duality is strictly preserved so that consistent and highly accurate discrete sensitivities can be obtained; and comparable efficiency to hand-coded implementation can be achieved. Upon the cur-rent discrete adjoint method, a gradient-based optimization framework has been developed and applied to a drag reduction problem.     

一种基于自测试的卫星快检技术研究

传统卫星设计以功能实现为主，可测试性较低，卫星综合测试基本依赖遥测遥控，测试周期长、效率低、成本高，不能很好地适应未来卫星批量化研制需求。参考民用汽车快速电检技术，从卫星可测试性与自测试设计出发，设计了基于总线调度的卫星快检系统，提高了卫星快速检修与快速发射能力，满足未来卫星低成本高效率研制需求。     

一种新的基于波形处理的数字式自动测距系统

提出了一种新的基于波形处理的全数字式自动测距系统的设计，介绍了该系统采用的信息匹配滤波器、波形采集和数据传输、波形分析等技术。给出了该系统的实验、雷达外场校飞试验和靶场精度校飞试验的结果。试验结果表明，该系统的原理正确，功能及扩展能力强，性能可靠。     

超低频计量自动测试系统

充分利用现有的标准仪器,在微机统一控制下,组成一个超低频参数计量的自动测试系统。系统中各台仪器仍保持其独立工作能力。整个计量测试过程,都用软件控制,自动完成,并能对数据自动采集和处理,用汉字打印输出检测结果。     

Influence and optimization of parameters of prepreg viscosity during placement

This paper tested the viscosity of prepreg in the automatic placement process, and conducted the probe and placement-90° peel tests through the test systems. The law of variation of prepreg viscosity during the laying process was studied through these tests under different conditions by taking the peel force to intuitively and quantitatively characterise the viscosity of the prepreg.The results show that this viscosity is inversely proportional to the laying rate, proportional to the laying pres...     

基于UML的自动测试系统建模方法研究

为提供自动测试系统的领域知识，在对自动测试系统的特性进行研究的基础上，将UML引入自动测试系统的建模过程中，利用UML的扩展机制为自动测试系统的框架开发提供该领域的知识。通过为一个自动测试系统开发平台不同于常规软件产品部分的建模实例，给出了自动测试系统的特定领域知识的表达方式。     

卫星控制系统的三机容错计算机系统

本文讨论了容错计算机的三种容错结构,即D/S(双机变单机)、TMR/J(三模冗余变单机)、以及TMR/D/S(三模冗余变双机再变单机)结构。给出了三种容错结构的可靠性数学模型,对影响可靠性的诸多因素进行了讨论、比较,确定采用TMR/S方案。文中对TMR/S的硬件设置及容错管理程序做了简要介绍。对从事容错设计的工程技术人员有一定参考价值。     

弹道式再入飞行器以配平攻角状态返回的轨道计算原理及相应的控制要求

弹道式再入飞行器一般为轴对称旋成体,但其质心可以偏离对称轴。我们称通过飞行器质心和对称轴的平面为飞行器的对称面。这种飞行器以配平攻角状态返回时,不仅要求其相对于地球的飞行速度矢量平行于飞行器的对称面、飞行攻角恰等于配平攻角,而且要求其相对于质心的转动角速度矢量垂直于飞行器的对称面,能使飞行器的姿态跟随飞行速度矢量的改变。基于上述考虑,本文给出了这种飞行器以配平攻角状态返回的轨道计算原理及相应的控制要求。     

主导极点圆域约束下具L_2有界不确定性系统的鲁棒优化设计问题

根据闭环极点的渐近性质，在考虑了L2有界不确定性对系统闭环极点的最坏影响下利用复s平面与复ω平面之间的Mobins变换，给出满足闭环主导极点圆域约束的状态加权阵Q的选取过程，实现保证一定稳定格度并具有主导极点与非主导极点分布的鲁棒性优化设计。仿真算例表明了设计的有效性。