基于反馈补偿K-means的救援物资需求预测

针对低空应急救援过程中救援物资需求的多样性与不确定性，提出基于反馈补偿K-means相似搜索的物资需求预测算法。通过比较非平稳数据处理方法，采用差分自回归平均移动模型（ ARIMA）对历史灾情数据进行平滑处理；将预处理后的灾情数据运用基于反馈补偿的K-means方法进行聚类分析；再对比夹角余弦，杰卡德相似系数以及相关系数这3种方法，搜索出相似度最大历史灾情案例，并线性求解当前低空应急救援所需物资量。实验结果表明，在基于反馈补偿K-means相似搜索的物资需求预测过程中，运用相关系数搜索的误差是最小的，方法不仅提高了大数据处理能力，而且在一定程度上提高了预测精度。     

基于双三次B样条插值的薄壁件加工误差补偿方法

以薄壁件加工过程为研究对象,针对薄壁件加工的误差预测、补偿问题,提出一种基于双三次B样条插值的薄壁件加工误差补偿方法.在获得薄壁件历史加工数据的基础上,运用插值理论建立误差模型,得到误差分布规律,考虑切削力与弹性变形之间的迭代影响建立误差补偿方法.该方法综合考虑了弹性变形、热误差、几何误差等多种误差源,通过数值分析方法建立误差模型,避免以往薄壁件误差建模中误差源分析不全、解析困难的弊端,最终以薄板工件为例,通过实验验证,应用该误差补偿方法可有效提高薄壁件的加工精度.     

智能机床的误差补偿技术

误差补偿技术是智能机床精度提高与保持的关键技术之一.分析了国内外机床误差补偿技术研究现状,提出智能机床误差补偿技术总框架;总结了智能机床误差源、误差元素、几何与热误差的误差元素模型及建模方法,以及典型的误差补偿方法;研究了力误差补偿技术、基于零件在线测量的误差综合补偿技术;最后,对未来智能机床误差补偿技术的发展重点进行展望.     

基于蒙特卡罗方法的冷原子干涉仪物理仿真

由于现有的噪声分析方法无法很好地评估在复杂环境下冷原子干涉仪的输出特性,本文提出了一种新的冷原子干涉仪仿真方法,可以模拟大动态条件下各项噪声及其之间的耦合对冷原子干涉仪的影响。利用单粒子波包演化的处理方式对冷原子干涉仪进行全过程物理建模,并采取蒙特卡罗方法对大量确定初态的原子进行全过程统计,最终得到冷原子干涉仪在多种噪声同时存在的情况下的响应。该方法主要优势体现在能够对噪声耦合情形进行高精度仿真,并且可以根据实际数据对干涉仪输出进行实时处理,以提升冷原子干涉仪的性能指标。     

火电厂汽包水位测量及误差分析

汽包水位信号的准确测量直接关系到机组的安全稳定运行及汽水调节的品质，是机组安全、稳定运行的重要保证，因此需要采取必要措施提高汽包水位的测量精度并减少测量误差。本文介绍了汽包水位常用的测量方法、汽包水位测量误差产生的原因以及因汽包压力及取样管温度引起的水位测量误差的校核计算方法，提出r适用于发电厂汽包水位校核计算及实际补偿的通用原理和试验方法。     

J2级经纬仪竖盘指标自动补偿误差不确定度

介绍了按照ＪＪＧ４１４—９４《光学经纬仪》检定、校准Ｊ２级经纬仪竖盘指标自动补偿误差时，依据“’９３国际指南”要求，对其测量不确定度进行的分析、计算。     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于装配约束的飞机导管几何特征建模与误差补偿

针对飞机导管实际装配过程中因装配应力大导致故障频发的问题,提出了一种基于导管装配特征的误差补偿方法.首先采用几何建模法进行了导管装配过程的几何建模,并提出了一种基于轴线矢量的导管装配模型建模方法.在此基础上,采用罗德里格旋转公式建立了基于实际装配工况下的导管空间位姿计算模型.然后基于导管装配要求进行了装配约束分析并识别...