Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

无线电陆空通话英语交际能力模型研究

民航无线电陆空通话语言是以英语为载体的一种空地交流的特殊语言。本文在应用语言学的研究成果之上,提出了该语言的交际能力模型,该模型包括语言能力、策略能力、背景知识和心理生理机制四个部分。笔者结合民航陆空通话实际,对模型各个部分进行了分析,重点解析了策略能力在模型中的核心功能。     

飞行器空中回收

文中详细介绍了飞行器空中钩取的回收方法和空中钩取作业的主要技术关键。     

运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。     

两种不同形式前起落架缓冲与前轮转弯性能对比研究

缓冲与前轮转弯纠偏性能对起落架设计具有重要影响。采用ADAMS软件分别建立支柱式和摇臂式前起落架的飞机刚柔耦合动力学模型,并分别对前起落架的着陆缓冲和转弯纠偏过程进行动力学仿真及对比分析。结果表明:在同种着陆工况下,支柱式比摇臂式前起落架样机在前起落架航向所受合力更大,前轮接地后的俯仰角速度和机头下沉量相差不大;支柱式比摇臂式前起落架样机在更小的操纵力矩、转弯角度和侧向加速度下就会发生飞机侧滑。研究结果可为前起落架的设计和选取提供有益参考。     

某型导弹控制舱壳体机械加工技术研究

结合生产实践介绍了新一代导弹的重要构件－控制舱壳体机械加工的难点及其工艺总方案的确定，并着重就控制铝合金乐于壁壳体的变形、提高偏心圆加工精度的措施进行了细致的研究，实践证明，该种工艺方法简单、合理，可以为类似的复杂舱体加工提供一条可借鉴的工艺途径。     

AEDMS工程文件编号的生成算法

工程文件编号生成算法是国航工程文件管理系统（AEDMS）开发的难点。提出的．工程文件编号生成算法包括．工程文件流水号和改版号的指派算法与自动编排算法。前者解决了新旧系统．工程文件编号的兼容问题；后者是一种新的基于关系代数的自动编号算法，其利用元组序号，具有紧凑简单、可靠性好、可维护性好、执行效率高、适用面广的特点。实算结果和AEDMS运行实践表明，此工程文件编号生成算法是可行的。     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.     

点阵结构空气舵及内部流体热流固耦合研究

开展了钛合金TC4材料激光粉末床熔融(LPBF)工艺研究,在此基础上设计了多孔轻质空气舵模型,并基于有限差分法(FDM),采用三维流固耦合共轭传热数值计算方法,利用流体体积法(VOF)追踪流体自由液面,研究了典型的点阵夹层结构的空气舵内部冷却液动态换热过程的相互影响过程,考虑了冷却液与钛合金材料蒙皮间的耦合传热及湍流换热。结果表明,空气舵的内部流体压强随速度的增加而增加,从而导致流体出口的速度增加。当压强增加到一定程度时,流体的出口以水柱形式喷出。虽然较大的流体速度可以带走较多的热量,但是影响远小于对压强的影响。综合考虑空气舵的服役要求,获得了合适的冷却水入口速度。