真空汽相焊冷却速率对多层板焊点质量的影响

为解决多层印制板真空汽相焊由于焊后冷却不足导致的焊点纹路问题,本文确定多层板焊点纹路出现的根本原因,对焊后冷却区进行改造,进而研究不同焊接工艺对焊点表面形貌、内部组织形貌及焊点力学性能的影响。实验结果表明,快冷下焊点形成的界面金属化合物（IMC）更薄,焊点组织也更加均匀,即Pb在Sn中的分布更弥散。快冷下形成的IMC层晶粒直径在1μm左右,剪切强度为17.26 MPa,较慢冷提高了43%,达到细晶强化的目的。此外,由于冷却速度过慢导致的焊点表面纹路缺陷也得到明显改善。     

基于机器学习的单孔绝热气膜冷却效率分布预测研究

为了研究利用机器学习技术对绝热冷却效率进行直接预测的方法及特点,搭建了基于上采样卷积神经网络的机器学习模型,生成了用于训练以及验证的数值模拟数据集,使用了监督式学习的方法对模型进行了训练.训练使用反向传播算法和基于随机梯度下降的Adam优化算法,输入模型的参数包括吹风比、主流湍流强度、喷射角、孔形状、孔尺寸,模型输出为...     

工业洁净室风淋系统测量方法研究

简要介绍了工业洁净室常用风淋系统的原理及其应用,分析了影响风淋系统净化效果的几种因素,给出了工业洁净室常用风淋系统的具体计量检测方法。     

基于蒙特卡罗法的航空发动机空气系统稳态算法优化

针对目前航空发动机空气系统稳态算法中收敛性依赖初值的问题,将蒙特卡罗方法与流体网络法综合应用到空气系统可压缩流体一维网络计算中,提出了一种新的计算方法Monte Carlo-Fluid Network（MC-FN）。该方法将空气系统简化为由节点和元件组成的网络,借助蒙特卡罗方法获得空气系统内各节点压力分配,再根据空气系统中各元件流阻特性和换热特性计算流量、温度。计算中通过将游动次数比较少的蒙特卡罗方法的计算结果作为流量残差法节点压力、温度的初始值,实现快速求得精确收敛解。与流量残差算法相比,MC-FN方法计算精度不变,收敛速度提升了66.5%;与线性求解法相比,MC-FN方法的计算精度提升了25.2%,收敛速度提升了43.8%。     

带增压压气机的小型脉冲爆震涡轴发动机性能分析

为了解决小型涡轴发动机采用脉冲爆震燃烧室代替主燃烧室时,由于脉冲爆震燃烧室的增压作用,无法从压气机出口引气对燃气涡轮冷却、封严的问题,提出了一种带增压压气机的脉冲爆震涡轴发动机(PDTSE)构型,并建立了相应的性能分析方法。对常规涡轴发动机与带增压压气机的PDTSE性能进行对比研究,计算结果表明：与常规涡轴发动机相比,带增压压气机PDTSE性能具有较大优势;在整个设计域内,综合考虑性能指标和设计难度,在循环最优处,带增压压气机的PDTSE相比普通涡轴的热循环效率高14.5%,耗油率低9.7%,单位功率高27%。     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

民用飞机的大气数据模块功能性分析

目前,国内外对于民用飞机大气数据系统的研究多集中于大气数据计算机和皮托管气动特性方面,而鲜有关于大气数据模块对大气数据系统提供有效数据的研究。为了研究大气数据模块对民用飞机压力管路和数据精度的影响,以机上管路和高度参数建立模型,对大气数据惯性基准系统中大气数据模块的组成结构、工作性能进行分析,得到 CRJ200、G450 和 G550 三种机型的大气测试数据,并找到造成不同误差范围的原因。结果表明：装有大气数据模块的 G450 和 G550 机型能够有效提高飞机的渗漏精度,实时反映民用飞机的大气数据信息;大气数据模块的使用对管道变形、渗漏以及数据精度等问题有重大改善,可为民用飞机大气数据系统设计提供参考。     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

空管基础数据分类标准研究

从当前国际、国内军民航各方面,对航空数据标准应用现状进行资料汇集和整理,分析现有技术和标准的局限性,参考国际数据交互标准AIXM,提出我国空管基础数据分类标准和编码规则,为实现全球范围内的航空数据交换奠定基础。     

中国民航管制员以考促学模式研究

“民航管制员英语等级测试”并不是最终目的,以考促学,全面提升中国民航管制员整体英语水平才是根本。本文通过相关空管局（站）的试验运行,总结出两种有效的管制员英语学习模式,一是集中培训,以点带面,一是构建平台,自主学习,以期对我国民航管制员英语水平的提高有所帮助。