三维编织复合材料圆柱壳轴压下的屈曲分析

根据边界层理论,采用奇异摄动法,考虑非线性前屈曲、大挠度和初始几何缺陷的影响,分析在固支条件下,三维四向编织复合材料圆柱壳在轴压下的屈曲和后屈曲性态,讨论了纤维体积含量、几何参数等因素对圆柱壳屈曲的影响.结果表明,纤维体积含量、编织角和初始缺陷对编织复合材料圆柱壳的影响是不可忽视的.     

塞式喷管三维流场的数值模拟

从曲线坐标下的三维平均雷诺的N-S方程出发,并用k-ε两方程湍流模型封闭方程组,采用二阶精度的精度无波动、无自由参数的耗散差分格式(NND格式),发展了模拟塞式喷管三维流场的数值程序,并对线性塞式喷管和瓦状塞式喷管在不同落压比下的三维流场进行了数值模拟研究.结果较好地预示了塞式喷管的三维流场特征,并且显示瓦状塞式喷管除了圆柱形结构比平板更能承载外,其塞锥压强分布可以进一步改善其受力情况.     

彩色三维激光快速成型技术的研究

目前逆向工程采用线结构激光和一个彩色面阵CCD摄像机构成三维彩色扫描系统,彩色CCD摄像机分两次对被测物体成像,首先摄取物体的彩色图片,然后加用滤光片再摄取激光光平面上的三维信息.最后将两次获取的信息重叠,便可得到三维彩色信息.提出了激光光平面方程式三维测量方法,建立了相应的数学模型.研制成一套适用于彩色逆向工程流程,并进行了实验研究,给出了实验结果.     

自适应DBF与空间谱估计

讨论了自适应数字波束形成(DBF)技术和超分辨空间谱估计技术,并提出了一种基于信号协方差矩阵特征分解的时-空二维信号高分辨谱估计算法。以上技术应用于相控阵雷达系统,可以精确获得多个运动目标的方位信息和多普勒信息。文章最后给出了计算机模拟结果。     

Initial nighttime ionospheric observations with advanced ionospheric probe onboard FORMOSAT-5

FORMOSAT-5 satellite was launched into a sun-synchronous orbit at 720 km altitude with 98.28° inclination on 25 August 2017. The onboard scientific payload, Advanced Ionospheric Probe (AIP) is capable of measuring topside ionospheric ion density, cross-track flow velocities, ion composition and temperature, and electron temperature. Initial observations of nighttime midlatitude ionospheric density and vertical flow velocity variations at 2230 LT sector during a few quiet magnetic days in December 2017 are studied here. Longitudinal density variations in the equatorward edge of midlatitude ionospheric trough (MIT) region are noticed. Accompanied with this density variation, the vertical flow velocities also behave differently. Although the density difference has been stated due to zonal wind effect related to the declination of the geomagnetic field lines, the vertical flow velocity variation seems to play the opposite role. All these density and vertical flow observations in the northern winter hemisphere can only be explained by the longitudinal differences in the diffusion velocity coming down from the protonsphere (plasmasphere). In addition, the hemispheric asymmetry in the vertical flow velocity can also be explained by the interaction between the topside ionosphere and the protonsphere. The observed vertical flow variations near MIT at different longitudes should present a new potential tool for the study of MIT formation.     

数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

基于体积力模型的1维涡轮特性评估方法

涡轮低维气动特性评估方法的预测精度对涡轮气动设计有重要意义.基于适用于轴流涡轮特性评估的1维体积力方法,分析和局部调整了Adam和Leonard的1维体积力模型中的叶片力源项和离心力源项,并在特性计算中引入涡轮损失模型.通过1个低压涡轮和1个含冷气高压涡轮对该方法进行验证,计算结果表明:该方法对2个算例在涡轮设计工况点的流量效率预测偏差均在1％以内,且能够反映涡轮气动特性随膨胀比的变化趋势,具有良好的精度,可用于快速可靠地评估涡轮低维气动特性.     

Nb/Nb5Si3微叠层材料及其制备技术

Nb/Nb5Si3合金是未来最具潜力的超高温结构材料,实现该材料的结构微叠层化是一种新颖的材料设计思路和制备方法.Nb/Nb5Si3微叠层材料是将Nb和Nb5Si3按一定的层间距及层厚比以ABABAB型交互重叠结构形成的多层材料,其几种典型的制备技术包括热压、等离子喷涂、磁控溅射和电子束物理气相沉积(EB-PVD).其中EB-PVD是一种最适合工程应用的Nb/Nb5Si3微叠层材料制备方法,结构和功能复合、纳米化叠层、高韧化工艺是EB-PVD技术制备Nb/Nb5Si3微叠层材料的发展方向.     

基于代理模型的二元收扩喷管流道型面优化设计

在二元收扩（2D-CD）喷管设计参数对喷管气动性能影响研究的基础上,以获得尽可能高的喷管推力系数为目标,以喉道宽高比、喉道型面半径比、收敛半角和扩张半角为设计变量,对二元收扩喷管的流道型面进行了优化设计。设计过程中,利用正交试验设计方法确定初始样本点,建立喷管推力系数与设计参数间的Kriging代理模型,采用自适应模拟退火算法（ASA）对代理模型进行分析求解。结果表明,二元收扩喷管的优化型面参数为:喉道宽高比为6,喉道型面半径比为0.3,收敛半角为15°,扩张半角为5.64°,此时最大推力系数为0.97847,流量系数为0.98778.