Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

Critical wake vortex encounter scenarios

A simulation-based method was developed to investigate the severity of Wake Vortex Encounters (WVEs). This paper describes an important part of this method: the determination of worst-case WVE conditions, which is referred to as Worst-Case Search (WCS). The WCS results permit to reduce time and costs of WVE severity related piloted simulator tests and allow the comparison of the hazard that vortices of different generator aircraft exert on a follower aircraft.The WCS is based on a high fidelity, offline simulation of the follower aircraft that includes the interacting wake vortex, a hazard criterion that rates the severity of each WVE, and a pilot model. It can be formulated as an optimisation problem that is solved with the optimisation tool MOPS (Multi Objective Parameter Synthesis). MOPS varies the encounter geometry until the simulation yields maximum values of the WVE hazard criterion.Worst-case encounter conditions for different parameters were investigated and sensitivity studies performed. The influence of the height above ground, the core radius, and the models for the wake vortex velocity profiles on the severity of a WVE was examined. To show the capability of the method, a comparison of the severity of a WVE behind two different heavy transport aircraft for a 20 t aircraft was made. The WCS method demonstrated its applicability and delivered the worst-case encounter geometry.

Zusammenfassung

Zur Untersuchung der Heftigkeit von Wirbelschleppen wurde eine simulationsbasierte Methode entwickelt. Dieser Beitrag beschreibt einen wichtigen Bestandteil dieser Methode: die Bestimmung der ungünstigsten (worst case) Einflugbedingungen in die Wirbelschleppe. Die Kenntnis dieser Bedingungen gestattet eine Zeit- und Kostenreduzierung bei wirbelschleppenbezogenen Simulatorversuchen mit Piloten und ermöglicht gleichzeitig einen Vergleich der vom Wirbel ausgehgehenden Gefährdung für verschiedene Kombinationen voraus- und einfliegender Flugzeuge.Die Worst-Case-Bedingungen werden mit einer Offline-Simulation des Folgeflugzeugs bestimmt, die Modelle für die Wechselwirkung mit der Wirbelschleppe und für das Pilotenverhalten sowie Kriterien für die Gefährdung durch den Wirbel umfasst. Für die Steuerung der Simulation und die Worst-Case-Suche wird die Optimierungssoftware MOPS (Multi Objective Parameter Synthesis) verwendet. MOPS variiert die Geometrie des Wirbelschleppendurchflugs bis die Simulation die maximalen Kriterienwerte für die Gefährdung durch den Wirbel liefert.Die Worst-Case-Bedingungen wurden für unterschiedliche Parameter untersucht. Der Einfluss der Höhe über Grund, des Kernradius' und der unterschiedlichen Modelle für das Wirbelgeschwindigkeitsprofil auf die von den Wirbelschleppen ausgehenden Gefährdung wurde dabei ermittelt. Um die Leistungsfähigkeit der Methode zu demonstrieren, wurde die Gefährdung von Wirbelschleppen zweier generierender Flugzeuge (heavy class) auf ein nachfolgendes 20 t Transportflugzeug verglichen. Die Anwendbarkeit der Methode wurde bestätigt und die ungünstigsten Einflugbedingungen berechnet.     

固体发动机喷管延伸锥展开前级间分离的热环境分析

通过FLUENT流场计算软件,采用RNGK k-ε湍流模型,针对带有延伸喷管的多级固体发动机级间热分离的热环境进行了数值分析。研究表明,延伸喷管尾流受到连接筒、前封头、延伸段的阻碍后,其流动特征变化显著,尤其在一级前封头的影响下形成回流,并在喷管内形成激波。计算得到的热环境参数,对发动机的热防护设计具有一定的参考价值。     

一种应用于实时深空干涉测量的电离层时延修正方法

针对"嫦娥4号"中继星任务S频段信标信号的高精度实时干涉测量需求,结合深空测控干涉测量系统采用的稀疏标校工作模式,研究验证了一种面向测控模式实时干涉测量的电离层时延修正方法。首先分析了电磁波经电离层传播的延迟机理及特性;基于深空站历史观测数据,通过自相关函数分析验证了天顶向TEC的周日特性;在此基础上,结合深空干涉测量中心数据处理设备软件系统,讨论了电离层时延修正方法;通过任务期间的实测数据处理分析,验证了所提方法可以将实时测量精度提升1～3 ns,对低仰角跟踪弧段,该技术方法优势更为明显。该方法为后续深入推进深空测控干涉测量系统在任务中的实时应用提供了技术储备。     

中国探月工程

"嫦娥4号"于2019年1月3日成功实现人类航天器首次在月球背面软着陆,"玉兔2号"月球车率先在月背刻上了中国足迹。至今,国际月球探测活动共实施126次,期间出现两个探月高潮。20世纪50—70年代,美苏两个航天大国之间的竞争引起第一轮探月高潮。20世纪末至今,各航天国家意识到月球探测的战略意义,纷纷提出月球探测计划并积极实施,月球成为各国争先探测的热点,掀起第二轮探月热潮。中国自2004年首次绕月探测工程立项实施以来,共开展了"嫦娥1号""嫦娥2号""嫦娥3号""嫦娥4号"及再入返回飞行试验共5次月球探测任务,实现"五战五捷",在空间技术、空间科学与应用、国际合作等方面取得了非凡成就,积累了丰富的经验,后续将继续开展以无人月球科研站为主的月球探测活动。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

Statistical characteristics of low latitude Pc4s: Influence of solar wind and IMF parameters

Pc4 signatures for the year 2013, extracted from geomagnetic north–south and east–west components of induction coil magnetometer (LEMI 30) from low latitude station Desalpar (DSP), operated by Institute of Seismological Research (ISR), India have been investigated vis-à-vis the prevalent interplanetary parameters (IMF) as well as the geomagnetic activity indices. A clear dominance of Pc4-5 (467 events) over Pc3 (17 events) is observed. Local time variation of Pc4 shows a peak in the noon sector in both X and Y components. Our investigations show that the dominant peak frequency is 10 mHz at low latitude region. Correlations with solar wind and IMF parameters illustrate highest occurrence of Pc4 for a solar wind speed of 300–400 km/s and average IMF B field of 3–6 nT. The amplitude of Pc4s at DSP shows an increase with increasing solar wind speed, plasma density, solar wind dynamic pressure and average B field which is also reflected in the trend of frequency variation of these pulsations. We report that IMF clock angle at low latitude does not have influence on Pc4 occurrence. Based on the characteristics of these events, detected in latitudinally distributed stations from low and mid-latitudes from northern and southern hemisphere, we infer that modes were compressional, which could be driven by K-H instability or solar wind dynamic pressure, as compressional modes can propagate to low latitude with little attenuation.     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。     

对转涡轮基本分析

对于对转涡轮基元级的特性,首先分析不同基元级的负荷特性应以单位叶列平均的负荷能力为准。其次,模拟常规级的经典分析,讨论了对转涡轮基元级的自变变量及定义了不同类型的典型对转涡轮基元级,按此可以很简明地得出它们在不同转速比下的负荷特性。同时,还初步比较了对转级与常规级的基元级效率。由此可见,对转涡轮的单位叶列负荷系数可比常规级有成倍的增长而且有更高的效率。     

开关点预置三相四线SPWM逆变器研究

脉宽调制型交直交变速恒频电源采用开关点预置SPWM逆变器,该逆变器由三相桥,交流滤波器,中点形成变压器及控制、驱动电路组成。绝缘栅双极性晶体管是一种新型的电力电子器件;应用该器件为功率器件,研制了一套15kVA开关点预置SPWM逆变器。由于对电路各个部分均进行了充分分析和优化设计,实际制作的逆变器具有较小的体积、重量,并具有优越的电性能。