Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

Attitude control of a satellite with redundant thrusters

Redundant thrusters are generally used for a reliable attitude control system. Also, redundant thrusters yield a better performance if they are used appropriately. In this paper, the authors propose an efficient redundancy management algorithm to reduce the fuel consumption. The algorithm is based on a linear programming problem which is a constrained optimization problem. For the algorithm, a cost function is defined as a quantity related to the fuel consumption for a maneuver. The independent variables are the thrusters' on-times which are control input variables of a satellite dynamic model. The advantage of the proposed method is verified by numerical examples. The examples show that the proposed method consumes less fuel than an existing method for a given maneuvering command. A sub-optimal algorithm is also discussed for an onboard computation. The proposed algorithm is applied to two maneuvers: move-to-rest and rest-to-rest. This is verified by a numerical simulation.     

The Russian experience in medical care and health maintenance of the International Space Station crews

The main purpose of the medical support system aboard International Space Station (ISS) is crew health maintenance and high level of work capability assurance prior to during and after in space flights. In the present communication the Russian point of view dealing with the problems and achievements in this branch is presented. An overview on medical operations during flight and after finalization of the space missions based on Russian data of crew health and environment state monitoring, as well as data on the inflight countermeasures (prophylaxis) jointly with data on operational problems that are specific to ISS is presented. The report summarizes results of the medical examination of Russian members of the ISS and taxi crews during and after visits to the ISS.     

Optimal positioning of piezoelectric actuators on a smart fin using bio-inspired algorithms

In this paper a novel approach is developed for optimization of piezoelectric actuators in vibration suppression. A scaled model of a vertical tail of F/A-18 is developed in which piezoelectric actuators are bounded to the surface. The frequency response function (FRF) of the system is then recorded and maximization of the FRF peaks is considered as the objective function of the optimization algorithm to enhance the actuator authority on the mode, which assigns the optimal placement of the pair of piezoelectric actuators on the smart fin. Six multi-layer perceptron neural networks are employed to perform surface fitting to the discrete data generated by the finite element method (FEM). Invasive weed optimization (IWO), a novel numerical stochastic optimization algorithm, is then employed to maximize the FRF peak which in due reduces the vibration of the smart fin. Results indicated an accurate surface fitting for the FRF peak data as well as the optimal placement of the piezoelectric actuators for vibration suppression.     

Coupled thermal,structural and vibrational analysis of a hypersonic engine for flight test

This paper describes a relatively simple and quick method for implementing aerodynamic heating models into a finite element code for non-linear transient thermal-structural and thermal-structural-vibrational analyses of a Mach 10 generic HyShot scramjet engine. The thermal-structural-vibrational response of the engine was studied for the descent trajectory from 60 to 26 km. Aerodynamic heating fluxes, as a function of spatial position and time for varying trajectory points, were implemented in the transient heat analysis. Additionally, the combined effect of varying dynamic pressure and thermal loads with altitude was considered. This aero-thermal-structural analysis capability was used to assess the temperature distribution, engine geometry distortion and yielding of the structural material due to aerodynamic heating during the descent trajectory, and for optimising the wall thickness, nose radius of leading edge, etc. of the engine intake. A structural vibration analysis was also performed following the aero-thermal-structural analysis to determine the changes in natural frequencies of the structural vibration modes that occur at the various temperatures associated with the descent trajectory. This analysis provides a unique and relatively simple design strategy for predicting and mitigating the thermal-structural-vibrational response of hypersonic engines.     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.     

Investigation of phase transition-based tethered systems for small body sample capture

This paper summarizes the modeling, simulation, and testing work related to the development of technology to investigate the potential that shape memory actuation has to provide mechanically simple and affordable solutions for delivering assets to a surface and for sample capture and possible return to Earth. We investigate the structural dynamics and controllability aspects of an adaptive beam carrying an end-effector which, by changing material equilibrium phases, is able to actively decouple the end-effector dynamics from the spacecraft dynamics during the surface contact phase. Asset delivery and sample capture and return are at the heart of several emerging potential missions to small bodies, such as asteroids and comets, and to the surface of large bodies, such as Titan.     

基于权重的层次矢量量化体压缩算法及其在空间环境中的应用

空间环境数据可视化是空间环境预报和服务的重要手段.目前基于矢量量化的压缩体绘制算法均只考虑了数据特点和压缩效果,并未结合具体应用需求.为适应空间环境体数据可视化具体应用需求,提出了一种应用驱动的压缩体绘制算法—-基于权重的层次矢量量化算法(WHVQ).算法将体数据划分为43的数据块,并为数据块设置权重,重点关注区域的数...     

Analysis of the Bugatti data for turbulent parameters

The high frequency measurements of N₂ and Ar concentrations by rocket borne mass spectrometers in the region 95 to ∼ 120 km are analysed for turbulence coefficients. The data, measured every 2m, are averaged over 20 m, and spectrally analysed. The spectra in the lower altitude region (Z < 108 km) are representative of lower atmospheric turbulence wherein the spectrum displays the “inertial” behavior. Thus we may determine turbulent parameters such as: viscous dissipation (ϵ), Reynolds stress (<u‘w’>), density flux (<w‘n’), diffusivity (K_ϱ), the flux Richardson number, mean wind shear and an estimate of local temperature.Also determined at the upper region (108<z<120 km) is a non-“turbulent” noise-like fluctuation that diffusively transfers mass, but demonstrates random statistics. Density, spectral distributions, analytic processes and statistical characteristics of the two atmospheric mechanisms will be given.