基于二次调节原理的力矩负载模拟器中压力波动的补偿

 基于静液二次调节原理的力矩负载模拟器具有能够连续高速旋转和无多余力矩的特点。在恒压网络中,二次元件的力矩输出与其斜盘倾角成正比,即：如果系统压力出现波动,也将导致输出力矩的波动。导致系统压力变化的原因可能是油源压力脉动,但更主要是负载的变化。为了研究压力波动的影响及补偿,建立了基于静液二次调节原理的力矩负载模拟器,给出了仿真参数,并在此基础之上进行了仿真研究。为了提高力矩跟踪精度,提出利用斜盘倾角传感器和系统压力传感器来进行压力补偿,可有效地将系统压力波动对于力矩输出的影响抑制到20%左右。仿真和试验验证了此补偿方法的有效性。     

Analysis on Potential Conflict Frequency of Intersected Air Routes in Terminal Airspace Design

In order to obtain accurate conflict risks in terminal airspace design, the concept and calculation model of potential conflict frequency for intersected routes are proposed. Conflict frequency is represented by the product of horizontal conflict frequency and vertical conflict probability. The horizontal conflict frequency is derived from the probability density distribution of conflicts in a period of time. Based on the recorded radar trajectory data, the concept and model of ROUTE distance are proposed, and the probability density function of aircraft height at a specified ROUTE distance is deduced by kernel density estimation. Furthermore, vertical conflict probability and its horizontal distribution are achieved. Examples of three intersected arrival and departure route design schemes are studied. Compared with scheme 1, the conflict frequency values of the other two improved schemes decrease to 53 % and 24%, respectively. The results show that the model can quantify potential conflict frequency of intersec ted routes.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

UHMWPE/PCH复合材料性能研究

采用超高分子量聚乙烯(UHMWPE)纤维作增强材料,结构与UHMWPE纤维相似、且对纤维表面具有良好润湿性的全碳氢树脂(PCH)作基体,通过热压成型工艺制备UHMWPE/PCH复合材料,并通过扫描电镜、介电谱仪等方法对复合材料的力学性能、介电性能、吸水、湿热性能及界面粘接性能进行表征.结果表明,UHMwPE/PCH复合材料力学性能良好、介电性能优异、吸水率小、吸湿率低、粘接性能好.     

超声速燃烧斜坡喷注器结构与性能的研究

为了进一步研究斜坡结构特点对超声速流场混合增强作用,设计了膨胀型和压缩型两种斜坡实验件,并分别进行了火焰传播、纹影及油流谱实验。利用数值仿真的方法对斜坡后压力分布、激波间相互作用以及流向涡的卷起过程进行了分析研究,与实验结果对比一致。最后分析了本实验结果与国外相关研究的差异,论证了本文设计的两种斜坡喷注器中膨胀型斜坡有更好的自燃及火焰稳定作用。     

The Lunar Gravity Ranging System for the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Lunar Gravity Ranging System (LGRS) flying on NASA’s Gravity Recovery and Interior Laboratory (GRAIL) mission measures fluctuations in the separation between the two GRAIL orbiters with sensitivity below 0.6 microns/Hz^1/2. GRAIL adapts the mission design and instrumentation from the Gravity Recovery and Climate Experiment (GRACE) to a make a precise gravitational map of Earth’s Moon. Phase measurements of Ka-band carrier signals transmitted between spacecraft with line-of-sight separations between 50 km to 225 km provide the primary observable. Measurements of time offsets between the orbiters, frequency calibrations, and precise orbit determination provided by the Global Positioning System on GRACE are replaced by an S-band time-transfer cross link and Deep Space Network Doppler tracking of an X-band radioscience beacon and the spacecraft telecommunications link. Lack of an atmosphere at the Moon allows use of a single-frequency link and elimination of the accelerometer compared to the GRACE instrumentation. This paper describes the implementation, testing and performance of the instrument complement flown on the two GRAIL orbiters.     

90°强曲率弯管内三维湍流流场的数值分析

本文根据作者发展的一种能计算任意截面形状 90°弯管内三维不可压缩湍流流场的分析方法,利用作者实验的圆截面弯管数据 ( R_c/D=0.87)检验 k- ε双方程湍流模型预示强曲率三维湍流流场的精度。计算了 R_c/D=2.3的矩形截面和 R_c/D=0.87的圆截面 90°弯管,并将计算结果与相应实验数据进行了比较分析。结果表明,即使对曲率很强的弯管,吸力面 (内侧壁 )不出现二次流迁移所形成的低速区前,标准 k- ε双方程模型仍能较好地预示出平均速度场。      

特征结构配置在飞机模态解耦中的应用

主要对特征结构配置在飞机模态解耦中的应用问题进行研究,并以某飞机横航向小扰动运动为例,按照飞机飞行品质规范要求,给出荷兰滚模态和滚转模态解耦控制的设计方法。     

测量旋涡脱落频率的实验研究

本文提出了一种由表面摩擦测量旋涡脱落频率的方法,阐述了其原理,给出了实验研究的结果,可作为涡街式流量计测量旋涡脱落频率的一种途径。