用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

基于小波变换的图像低通去噪

提出了一种利用小波变换的多分辨率特性对图像进行低通去噪的方法,系统的阐述了其基本原理和核心算法,并对加噪后的图像实现了低通去噪处理。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

集中涡的细微结构和破裂机理初探

本文利用微分方程定性理论和分叉的基本概念,证明了在轴向逆压梯度时集中涡截面流态是一个附着螺旋点,且存在至少一个极限环。破裂截面上的流态对应于一个退化结点。由此推出破裂时有V_θ/r|_(r=o)=0。通过分析认为,涡破裂是由于涡轴上轴向逆压梯度的扰动自动放大造成的。     

Pro／Engineer中的圆角特征处理

本文从设计原理的角度结合作者的使用经验，分析了Pro／E中圆角特征的作用、构造方法及注意事项，以利于该特征在众多菜单中理清思路并正确构造圆角特征。     

新型半导体导电类型判别仪设计与研制

在详细分析金属和半导体接触的整流理论基础上,通过增加补偿二极管、保护电路和数码显示电路改进了传统的三探针整流法,设计了一款用于对半导体材料导电类型判别的测试仪,实际运行结果表明该测试仪具有准确度高、电路结构简单、操作简便、成本低等特点,可满足实际生产和教学的需要.     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

金属工艺学课件的设计与制作

计算机辅助教学是计算机发展的新领域。本文主要介绍了金属工艺学课件的设计制作思路 ,制作的素材 ,它是传统课堂教学的有益补充     

水平冲量作用下共面椭圆轨道上航天器的交会

本文研究了在三次水平冲量作用下,一般共面椭圆轨道上两个航天器的固定时间交会问题。推导了完成交会的必要条件,给出了三次水平冲量的大小及其作用时刻的计算方法。