数控车削加工仿真系统结构研究

根据实际加工情况提出了一种虚拟NC车削加工的仿真系统的设计及实现原理。在Visual C++平台上利用OpenGL技术建立虚拟加工机床数字化模型,用C++语言实现物理仿真相关的各个数学模型的建立,进行虚拟环境下数控车削加工的几何仿真及物理仿真,实现产品的虚拟车削制造。     

INITIALIZATION METHODS FOR GROUP TRACKING

ＩＮＩＴＩＡＬＩＺＡＴＩＯＮＭＥＴＨＯＤＳＦＯＲＧＲＯＵＰＴＲＡＣＫＩＮＧＹａｎｇＣｈｅｕｇｙａｎｇ；ＱｕＪｉａｎｍｉｎｇ；ＭａｏＳｈｉｙｉ（ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，Ｂｅｉｊｎｇ，Ｃ...     

Active damping control of vibrational systems

The problem of vibration suppression in large flexible space structure (LFSS) is investigated. Based on the structure property of LFSS, an active damping strategy is proposed to effectively attenuate the critical vibrations of the structure subject to modeling uncertainty and external disturbance. Control algorithms are derived with the aim of suppressing both the vibrating magnitude and vibrating rate to an acceptable level. It is shown that the strategy exhibits robust and adaptive properties and is truly model-independent. The novelty of the proposed approach lies in the fact that it is fairly easy to set up the strategy and the overall computation involved is much less than any other strategies available to date. A two-bay truss is used to verify the validity of the proposed approach     

航天产品工艺定型阶段工艺文件的编制与审查

从编制《工艺定型标准化要求》、审定有关工艺定型文件和编写《工艺定型标准化审查报告》等方面浅述航天产品工艺定型阶段应做好的标准化文件的编制与审查,并对其工作内容作了介绍。     

串联系统耗用资源最小的一种直接寻优算法

本文提出了串联系统在满足系统目标可靠性要求y之下,使非线性约束(资源)达到极小的一种直接寻优算法。     

高燃速丁羟推进剂配方研究

通过多种途径的试验,对高燃速丁羟推进剂配方进行了研究.试验结果表明,采用超细防结块氧化剂和液固组合燃速催化剂能使推进剂的燃速达到70mm/s以上(在6.864Mpa压强下);采用组合工艺助剂可改善推进剂工艺性能.本推进剂燃烧稳定,压强指数和温度敏感系数较低,力学性能良好,为高燃速推进剂的研制奠定了良好的基础.     

综合运用"四个机制"促进航空装备研制

根据航空武器装备研制应当建立竞争、评价、监督、激励“四个机制“的规定,结合本企业实际,就综合运用“四个机制“、促进航空装备研制提出了见解与建议.     

激光外差干涉仪光电信号处理方法及特点

叙述和分析了外差激光干涉光电信号处理主其特点，指出了它们各自的应用范围，同时介绍了一处新型的光电信号处理方法，它不仅使外差干涉仪用于动态测量，而且可以同时实现高分辩率测量 。     

复杂系统的可靠性分析方法研究

本文对未来的运载器的复杂控制系统的可靠性建模、分配和预计的一般方法和程序及综合分析方法进行了讨论和研究。并简述了复杂系统的计算机辅助可靠性分析。     

Implementation of a three-phase high-power-factor rectifier with NPC topology

A three-phase four-wire power factor corrector based on neutral-point-clamped (NPC) topology is adopted to reduce the current harmonics and increase the input power factor. Using the NPC topology, the voltage stress of power switches can be reduced to the half of the dc-link voltage. With the dc-link voltage controller and the phase locked loop circuit, the balanced and sinusoidal line currents can be drawn from the ac supply system under the balance and unbalance mains voltages. The hysteresis current comparators are adopted in the current control loop to track the line current commands. Three voltage levels are generated on the ac terminal to the neutral point. Simulations and experiments are provided to verify the validity and the effectiveness of the proposed control scheme.