乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

电子技术基础课程研究型教学模式的探索与实践

本文首先阐明对培养学生创新意识培养的认识,然后讲述怎样结合电子技术基础课程的特点建立研究型教学模式,进而介绍丰富的教学实践,以及多层次、系列化和立体化的教材建设,最后说明教学效果。     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

时延平滑系统对实时数据传输影响分析

在实时数据传输过程中,科考船海事卫通链路会出现数据丢包和乱序数据处理不当的问题。通过分析科考船海事卫通链路系统组成,数据传输协议和类型,数据传输时延及抖动,时延平滑系统工作机制和处理流程等,发现时延平滑系统设计上存在缺陷。针对这一缺陷,提出在时延平滑系统中增加数据包分点实时监测、序号判定、序号重排等改进方法,对时延平滑系统的处理流程进行了完善。通过搭建仿真环境并进行模拟演练,验证了改进设计方法的可行性;在某工程应用中,科考船海事卫通链路采用改进后的时延平滑系统,未出现丢包和乱序问题,达到了预期效果。     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).     

气动计算软件集成系统中的远程控制

随着我国航空航天技术的飞速发展，气动计算软件集成技术日趋成熟，但用户在并行计算中需要手动输入的操作较多。鉴于此，通过编程开发了基于TCP／IP协议的FTP客户端应用程序，实现了对网格文件的信息采集、过滤并将其和参数、脚本文件等批量自动上传的功能。根据批处理文件中的命令，调用Windows平台自带的客户端Telnet，向远程集群管理节点发出命令，远程启动服务器集群的并行计算任务。最后，在客户端实现了远程控制服务器集群上的计算流体力学软件Fluent进行并行计算。结果表明：使用该远程控制系统能够减少用户输入操作，提高计算效率，保证数据的实时更新。     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。     

一类滞后不确定相似组合系统的分散控制

本文给出了一个使滞后的相似组合大系统镇定的分散鲁棒控制器的设计方法。不确定性是时变的,是以不确定参数出现在每个子系统中,而存在于互联项中的不确定性假设可能知道它的边界,当系统具有某种特征时,简化了一般控制器的设计。     

Recursive temporal-spatial information fusion with applications totarget identification

Centralized/distributed recursive algorithms for temporal-spatial information integration using the Dempster-Shafer technique are developed. Compared with the Bayesian approach, the Dempster-Shafer technique has the strong capability of handling information uncertainties, which are particularly desirable in many applications. In the centralized integration algorithm, all information is pooled into the central processor and integrated. In contrast, the distributed integration algorithm shares the computational burden among the local processors, which increases the computational efficiency. The developed algorithms are effectively applied to a target identification problem with three sensors: identification of friend-foe-neutral (IFFN), electronic support measurement (ESM), and infrared search and track (IRST)