卫星遥感数据的浏览查询技术

遥感卫星图像数据的预处理包括数据编目、存档管理、浏览查询和产品生产等部分。其中，浏览查询是向遥感数据的用户提供查询和检索卫星原始数据各级产品数据的手段，浏览查询系统的功能和性能直接影响到遥感数据的使用效率。本文介绍了新一代高码速率遥感卫星地面数据处理中浏览查询系统研制的主要技术。本文所研究的浏览查询技术已成功的运用到资源二号遥感卫星地面站的数据处理系统中。本文论述的数据处理技术将为其它遥感卫星地面数据处理系统的研制提供重要的帮助。     

实时微分控制的算法研究

实时微分控制是进行航天器轨道控制的主要方法。本文在费景高所提出的算法基础上 ,提出了一种有效的改进算法 ,扩大了算法的适用范围。文章对算法的稳定性进行了研究 ,并给出了此算法在弹道导弹显式制导中的应用实例。     

固体火箭发动机模态分析的缩聚方法

对于一些复杂结构的模态分析，要得到能够指导工程设计的结果，几何模型和力学模型划分单元必须足够多，这必然耗费大量的空间和时间资源，并导致计算困难。文中以某上面级固体火箭发动机模态分析为例，利用有限元法、固定界面法和Guyan缩聚法进行自由度缩聚后再进行模态分析，分析结果令人满意。     

关于卫星网整网自主定轨方法的探讨

随着在轨卫星数量的不断增多，卫星网的自主定轨已经成为迫切需要，本文重点阐述如何利用星间相对测量（相对距离测量和相对速度测量）技术，将卫星精密轨道确定方法和大地测量中的整网平差方法相结合，来实现卫星网的自主定轨，仿真结果表明，这一方法是切实有效的。     

Rankine涡作用下激波变形和分叉的数值研究

数值模拟了激波和Rankine涡相互作用，重点研究了波涡相互作用引起的激波结构的变化过程。应用非结构化适应网格下的二阶精度Godunov型的PLM格式来求解Elder方程，对一平面激波与不同涡强Rankine涡相互作用下瞬态激波的运动、发展进行了研究。漩涡与激波间相对强度的大小对激波结构的影响明显，弱相互作用诱导激波变形，强相互作用诱导激波变形并产生分叉。计算结果表明，应用非结构化适应网格的PLM格式所得到的数值解较好地反映了瞬态激波结构的有关特征和信息。     

战术弹道导弹中段多弹头进攻方法的研究

由于弹道导弹防御技术的不断发展完善，没有突防手段的战术弹道导弹进攻的成功概率正在不断下降。本文利用零射程线给出了一种在中段初始阶段使用的多弹头突防手段，并进行了理论证明和仿真验证。这种方法不仅工程实现简单，而且在对抗过程中十分有效。     

毛细泵环路系统运行特性的数值研究

给出了描述毛细泵环路(CPL)系统运行特性的非稳态模型,并运用该模型模拟了系统的启动过程,考察了储液罐中温度波动以及蒸发器上热负荷的突然改变对系统稳定性的影响;从数值模拟的角度更好地预测和分析CPL系统运行的过程和特点,该模型的数值结果与实验现象和实验数据相比有较好的一致性。通过该模型还可以进一步揭示CPL系统运行过程中启动困难、储液罐温度不能波动过大以及热流密度突然改变引起系统失效等内在原因,为设计出性能优良的CPL系统提供了理论依据。     

Tracking multiple objects with particle filtering

We address the problem of multitarget tracking (MTT) encountered in many situations in signal or image processing. We consider stochastic dynamic systems detected by observation processes. The difficulty lies in the fact that the estimation of the states requires the assignment of the observations to the multiple targets. We propose an extension of the classical particle filter where the stochastic vector of assignment is estimated by a Gibbs sampler. This algorithm is used to estimate the trajectories of multiple targets from their noisy bearings, thus showing its ability to solve the data association problem. Moreover this algorithm is easily extended to multireceiver observations where the receivers can produce measurements of various nature with different frequencies.     

基于FPGA的BCH(31,21)码译码器的设计

本文介绍了采用FPGA设计BCH(31．21)码的译码器的方法．译码器能对BCH(31．21)码进行译码和纠正低于或等于2位的随机错误．并给出了在MAX PLUSⅡ软件平台下的仿真结果。     

Discrete-time observability and estimability analysis for bearings-only target motion analysis

Observability in the context of bearings-only tracking (BOT) is still the subject of important literature. Different from previous approaches, where continuous-time analysis was considered, our approach relies on discrete-time analysis. It is then shown that this allows us to use directly and efficiently the simple formalisms of linear algebra. Using the direct approach, observability analysis is essentially reduced to basic considerations about subspace dimensions. Even if this approach is conceptually quite direct, it becomes more and more complex as the source-encounter scenario complexity increases. For complex scenarios, the dual approach may present some advantages essentially due to the direct use of multilinear algebra. New results about BOT observability for maneuvering sources are thus obtained. Observability analysis is then extended to unknown instants of source velocity changes. Even if observability analysis provides thorough insights about the algebraic structure of the BOT problem, the optimization of the observer maneuvers is essentially a control problem. Basic algebraic considerations prove that a relevant cost functional for this control problem is the determinant of the Fisher information matrix (FIM). So, a large part of this work is devoted to the analysis of this cost functional. Using multilinear algebra, general approximations of this functional are given. In order to involve only directly estimable parameters, the source bearing-rates are examined. Using these approximations, a general framework for optimizing the observer trajectory is derived which allow us to approximate the optimal sequence of controls. It is worth stressing that our approach does not require the knowledge of the source trajectory parameters and is still valid for a maneuvering source.