Angular Accuracy of a Scanning Radar Employing a Two-Pole Filter

A two-pole filter is proposed as a detector for a scanning radar. The optimum values of the filter coefficients are found and are approximated by a simple expression. The optimum two-pole filter requires a 0.15-dB increase in signal-to-noise ratio in order to provide the same detection capability as the optimum detector, and yields azimuth estimates whose standard deviation are within 15 percent of the Cramér-Rao lower bound. The estimator is simple to implement, avoiding the storage requirements of the moving window detector and the bias complications of the feedback integrator.     

‘Good’ events selection efficiency of the scintillation time-of-flight system of the Gamma-1 telescope in the 30–300 MeV energy range

The scintillation time-of-flight triggering system of the Gamma-1 gamma-ray telescope provides for both the time-of-flight discrimination and the pulse height discrimination of the secondary particles. The paper gives some experimental results for energy dependence of the instrument efficiency in 30–300 MeV energy range for different trigger logics.     

X-ray emission from Be star/X-ray binaries

Observations of X-ray emission from Be star/X-ray binaries are reviewed. Some optical characteristics of these binaries are also presented. Theoretical aspects pertaining to the X-ray emissions are given.     

Modeling of dynamic evolution of coronal loops

Parameters of expanding magnetic loops and arches and of mass flows generated by them in the corona have been computed in a 1D two-fluid approximation. Two possible trigger mechanisms of the coronal transients have been considered: (i) sudden increase of the background magnetic field strength, and (ii) heating and compression plasma inside these magnetic structures. We discuss the formation of shock waves and their dependence on dynamics and geometry of the magnetic structures.     

Simplified analysis of PWM converters using model of PWM switch.II. Discontinuous conduction mode

For pt.I see ibid., vol.26, no.3, p.490-6 (1990). According to the method of state-space averaging, when a pulsewidth modulation (PWM) converter enters discontinuous conduction mode (DCM), the inductor current state is lost from the average model of the converter. It is shown that there is neither theoretical nor experimental justification for the disappearance of the inductor state as claimed by the method of state-space averaging. For example, when the model of the PWM switch in DCM is substituted in the buck, boost, or buck-boost converter while the inductor is left intact, the average model has two poles: the first pole f_p1 agrees with the single pole of state-space averaging, while the second pole f_p2 occurs in the range f_p2⩾F_s/π. It is shown that the right-half plane zeros present in the control-to-output transfer functions of the boost, buck-boost, and Cuk converters in continuous conduction mode are also present in discontinuous conduction mode     

Bounds on Elevation Error Estimates of a Target in Multipath

The Cramer-Rao bound for an unbiased estimate of the elevation angle of a target in the presence of multipath is calculated for the symmetric (target and image symmetric about the elevation symmetry plane of antenna) and nonsymmetric cases for an antenna consisting of 21 elements. These bounds are compared to the maximum likelihood estimates and it is found that the rms error of the maximum likelihood estimate (which has a bias) is below the Cramer-Rao bound for unbiased estimates.     

False alarm control using Doppler estimation

A technique which uses maximum-likelihood estimates (MLEs) of target Doppler and target amplitude is developed for rejecting clutter residues. Multiple estimates are made and consistency checks are applied to the estimates. Simulation results indicate that for large clutter-to-noise ratios (C/N⩾55 dB) the probability of false alarm from clutter residues is reduced from 1.0 to below 0.01     

GTD Terrain Reflection Model Applied to ILS Glide Scope

The capability of calculating the reflection of electromagnetic signals from uneven terrain has many applications. One of these is the determination of instrument landing system (ILS) glide slope performance. For this application the wavelength is approximately 1 m, incidence angles are usually near grazing, and the fields are horizontally polarized, so that gross irregularities such as dropoffs and hills are more important than surface roughness. Past approaches used to calculate the ground reflections for this application have been three-dimensional physical optics models which were very cumbersome and time consuming and which neglected important diffraction and shadowing phenomenon; a two-dimensional physical optics model which was faster than the three-dimensional models but ignored many shadowing and transverse terrain variation effects; and a half-plane diffraction model which is applicable only to a specified type of terrain geometry. In this paper a terrain reflection model based on the geometrical theory of diffraction (GTD) is described which can accommodate any piecewise linear terrain profile, requires less computer time than the physical optics models, is capable of including transverse terrain effects, and determines the reflected fields with all important diffraction and blockage effects included.     

An Upper Bound on Detection Probability for Fluctuating Signals

In the theory of signal detectability, the signal-to-noise ratio (SNR), defined as the quotient of the average received signal energy and the spectral density of the white Gaussian noise, is a fundamental parameter. For a signal which is exactly known, or known except for a random phase, this ratio uniquely defines the detection performance which can be achieved with a matched filter receiver. However, when the signal amplitude is a random parameter, the detection performance is changed and must be determined from the probability density function (pdf) of the amplitude. Relative to the case of a constant signal amplitude, such signal amplitude fluctuation usually degrades performance when a high probability of detection (Pd) is required, but improves performance at low values of Pd; the corresponding change in the required SNR is the so-called signal fluctuation loss Lf. Thus, since Lf in some cases represents an improvement in performance for low values of Pd, a question of at least theoretical interest is: how large might this improvement be, when the class of all signal amplitude pdf's is considered. The solution, presented here, results in a lower bound on the signal fluctuation loss Lf as a function of Pd, or equivalently an upper bound on Pd as a function of SNR. The corresponding most favorable pdf was determined using the Lagrange multiplier technique and results of a numerical maximization are included to provide insight into the general properties of the solution.