Optimal motion planning for dual-spacecraft interferometry

We address the question of design and optimal control of a class of dual-spacecraft interferometric imaging formations. The first main contribution is that we combine two ideas introduced separately in the literature and propose a maneuver that offers improved imaging performance. We then formulate an optimal control problem to minimize fuel consumption and maximize image quality by minimizing the relative speed, which is proportional to the signal-to-noise ratio (SNR) of the reconstructed image. We show that the necessary conditions are also sufficient and that the resulting optimal control is unique. Finally, we apply a continuation method to solve for the unique optimal trajectory.     

Peculiarities of biological processes under conditions of microgravity.

The results of experiments aboard spacecraft demonstrated the dependence of the pattern of biological processes on microgravity and on the ability of biological objects to adapt themselves to new environmental conditions. This is of fundamental importance for solving theoretical and practical problems of space biology, or elaborating the theory of organism's behavior in weightlessness, and for elucidating the global mechanisms of the action of microgravity on living systems.     

Changes of deoxyribonucleoprotein in the spleen, thymus and liver of rats exposed to weightlessness and artificial gravity aboard the Cosmos biosatellites

Changes of deoxyribonucleoprotein in the spleen, thymus and liver of rats exposed to wegithlessness or artifical gravity on board biosatellites Cosmos 782 and Cosmos 936 after 20 days of flight were investigated. The level of polydeoxyribonucleotides in the spleen and thymus of rats exposed during the flight to weightlessness increased 4 – 11 hours after landing, suggesting breakdown of a part of the deoxyribonucleoprotein present. The use of artifical gravity prevented this breakdown in the thymus but not in the spleen. The breakdown was accompanied in the majority of cases by a decrease in teh deoxyribonucleoprotein content. We believe the breakdown of deoxyribonucleoprotein is due to a nonspecific stress reaction to the change from the weightless state to that of terrestrial gravity during landing. The polydeoxyribonucleotide level and amount of deoxyribonucleoprotein in the majority of cases returned to normal values during the 25 days of readaptation. No substantial change of deoxyribonucleoprotein was found in the liver. The different findings in the three organs are due to the fact that breakdown of deoxyribonucleoprotein takes place in sensitive cells underlying pycnosis. These cells are found in the spleen and thymus, but not in the liver.     

Low fluence.

The question of the appropriate extrapolation to low dose has long been a subject of controversy. A linear no-threshold model is favored by regulatory bodies as the basis of RBE assignments and estimates of radiation hazards to the general population. This model is largely supported by extensive application of the linear-quadratic survival formula "fitted" statistically to a wide variety of experimental data obtained at doses typically exceeding 1 Gy, and then extrapolated to mGy for practical applications, and even to the prediction of hazards from single electrons. Such extrapolations are questionable at best, and may even prove hazardous for risk evaluations. Fluence and geometry rather than dose based data are proposed as a basis for a limiting "threshold" for a "low dose" extrapolation. The proposed threshold is one where the fluence of particles is one per square micron, where on average only 2/3 of the 1 micrometers2 pixels covering an irradiated area are traversed by one or more particles. The corresponding dose threshold is determined by the LET of the bombarding radiation. For relativistic electrons this dose is about 0.032 Gy.     

The influence of gravity on the structure and functions of plant material

Growth process generate plant form and relate to most physiological functions. The Earth's gravity force affects plant growth in both obvious and subtle ways. It is a major environmental influence on morphology and physiology of plants. Gravity is less important as an agent for plant stress than as an environmental signal to guide growth. The plant's bioaccelerometers are remarkably sensitive, especially in hypogravity. Simulation (clinostat) studies and experiments in satellite laboratories are needed to understand the sensing, transduction, and response characteristics of g related mechanisms. By examining how plants alter growth processes to accomplish developmental or physiological “objectives” we may find it pragmatically desirable to ask ourselves how we might design a plant to achieve such responses to environmental influences. Examples of this design engineering approach for gravity related effects are described as an aid to experimentation.     

Lunar habitat concept employing the space shuttle external tank

The space shuttle external tank, which consists of a liquid oxygen tank, an intertank structure, and a liquid hydrogen tank, is an expendable structure used for approximately 8.5 min during each launch. A concept for outfitting the liquid oxygen tank-intertank unit for a 12-person lunar habitat is described. The concept utilizes existing structures and openings for both man and equipment access without compromising the structural integrity of the tank. Living quarters, instrumentation, environmental control and life support, thermal control, and propulsion systems are installed at Space Station Freedom. The unmanned habitat is then transported to low lunar orbit and autonomously soft landed on the lunar surface. Design studies indicate that this concept is feasible by the year 2000 with concurrent development of a space transfer vehicle and manned cargo lander for crew changeover and resupply.     

Characterization of an acoustic liner by means of Laser Doppler Velocimetry in a subsonic flow

This paper describes a new experimental approach to acoustic liner characterization in the presence of a grazing flow. The traditional methods of measurement use microphones to determine liner impedance. The in situ method in particular requires the simultaneous use of two microphones. The first is mounted flush with the surface of the liner grazed by the flow and the second is flush-mounted to the rear face of the liner. However, this method is invasive and assumes the reaction of the liner to be independent of the incidence of the waves (locally-reacting liner). The approach suggested here is radically different since Laser Doppler Velocimetry (LDV) is used to measure the acoustic perturbation of velocity, or acoustic velocity. This latter allows us to determine the acoustic displacement, which is the key parameter in Galbrun's linear theory for assessing the perturbation of pressure and the field of active intensity. The wall impedance and the propagation paths of acoustic energy in the presence of the liner may be deduced without any assumption and non-invasively. This approach was applied for characterizing a resistive liner in a test bench specially designed for aeroacoustic measurements, with a 2D LDV system. The flow was turbulent and the measured nominal Mach number was 0.13. The impedance and field of active intensity were then obtained. A comparison was carried out between the new approach and the in situ method using microphones. According to previous theoretical works in the literature and the presented test results, one has to be cautious about the definition of the impedance when performing in-flow acoustic measurements.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

The effects of the solar magnetic polarity and the solar wind velocity on Bz-component of the interplanetary magnetic field

We have studied the effect of both solar magnetic polarity and the solar wind velocity on the Bz-component of the interplanetary magnetic field, IMFBz, for the minimum activity of the solar cycles 21, 22, 23 and 24. We made a statistical study of IMFBz in the first section which is considered as an extension of Lyatsky et al. (2003). They made a statistical study of IMFBz for two periods of minimum solar activity 22 and 23 related to 1985–1987 and 1995–1997 when the solar magnetic field had opposite polarity. Our results seem to be consistent with the results obtained by Lyatsky et al. (2003). We found that there is a dependence of IMFBz on the IMFBx and the solar magnetic polarity for the minimum periods of the selected four solar cycles. In addition, we found that there is a dependence of IMFBz on the solar wind velocity.