七轴超精密铣-车复合加工中心RM3-7 Axes

RM3-7 Axes七轴高速超精密铣-车复合加工中心,是SPINNER-REALMECA最新推出的高端产品,适用于航空、航天、医疗器械、生物医学,微精机械、电子通信、汽配制造、光学零件等高技术领域的精细复杂加工.     

大攻角非对称涡特性及消除侧向力和力矩方法

本文提出了一个消除非对称力的头部外形方案。通过风洞实验,论证了方案是有效和稳定的。实验发现由对称涡向非对称涡的转变有一个不稳定区,建议用动态测力,得到与激光蒸汽屏流场相一致的结果,并研究其相互关系。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

涡喷发动机H∞控制参数化Riccati方程的解

由分块矩阵的奇异值不等式关系,给出了初猜值γ０、λ０的对半求解法,在此基础上直接给出带参数的Ｒｉｃｃａｔｉ方程迭代求解法。用此方法对涡喷发动机不确定性系统设计控制器并在发动机气动热务学非线性模型上进行了仿真验证,结果表明控制系统能够取得满意的鲁棒性能,抗干扰性能和伺服跟踪性能。     

F12/环氧复合材料力学性能研究

测定了Ｆ１２／环氧复合材料的基本力学性能,并比较了Ｆ１２纤维在单向板、强力环及薄壁容器中的纤维强度转化率。实验结果表明,Ｆ１２／环氧单向复合材料与其ＮＯＬ环的拉伸强度相近,而薄壁容器中的复合强度约为单向拉伸强度的６０％,但三种复合材料的纤维强度转化率相近,约为（７０．１±１．６）％。     

高分子纳米复合材料研究进展(Ⅰ)──高分子纳米复合材料的制备、表征和应用前景

综述了高分子纳米复合材料的发展研究现状,将高分子纳米复合材料的制备方法分为四大类：纳米单元与高分子直接共混（内含纳米单元的制备及其表面改性方法）;在高分子基体中原位生成纳米单元;在纳米单元存在下单体分子原位聚合生成高分子及纳米单元和高分子同时生成。介绍了高分子纳米复合材料的表征技术及其应用前景。