Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

(70~100)MeV准单能中子参考辐射场设计

国内基于串列加速器建立了144keV~15MeV的单能中子参考辐射场，解决了20MeV以下能区中子探测器注量、剂量等参数的量值溯源，但尚未建立20MeV以上能区准单能中子参考辐射场。随着航天空间中子探测任务的需要以及地面高能质子加速器的发展，20MeV以上能区准单能中子参考辐射场需求越来越突出。发展20MeV以上能区高能中子参考辐射场对于满足国防需求、推动中子计量学科发展具有重要意义。     

低温推进剂空间管理技术研究进展与展望

本文介绍了低温推进剂的性能优势与空间管理挑战，梳理了低温流体空间管理(CFM)技术特征及其研究现状，建议按照重力依赖型与重力无关型分类开展技术成熟度提升研究。调研了美国逾半个世纪的CFM技术搭载实验研究历程，分析了各类平台的工作特性与性能优势。基于我国航天发展现状与未来需求，探析了我国开展CFM技术攻关、飞行搭载实验的可行方案。建议在我国载人空间站规划舱内低温技术实验柜与舱外暴露平台实验模块，加速我国CFM技术向工程应用的转化。     

加油机加油过程视频监控需求分析

通过对一般加油过程的分析,提出了空中加油机加油过程视频监控需求。将加油过程分为会合、编队、对接、解散四个部分对监控区域进行讨论,并对监控区域进行整理及优化,从功能、分辨率及显示等方面进行分析,给出适应性的视频监控需求,为机外摄像头布局,摄像头和显示器选型,机外照明布置提供有效支持。     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

民用飞机全机静力试验前机身工况配平载荷设计

民用飞机全机静力试验中由于加载方案复杂,为了简化试验加载数量,传统的配平方案主要保证考核区的加载准确性,对于非考核区的载荷简化到若干加载点上。对于飞机机身这种薄壁结构,非考核区的配平对考核区影响较大。以某飞机前机身严重工况为例,基于飞机全机有限元模型,研究静力试验的载荷配平方案;通过对比分析态载荷与传统试验态配平载荷方案下的内力解,对传统全机静力试验载荷配平方案进行优化。结果表明：优化后的试验态内力解与分析态内力解基本吻合;对于飞机机身薄壁结构,圣维南原理并不适用,全机静力试验的载荷配平要与真实工况受力情况吻合,才能达到试验验证目的。     

基于 Kriging与多点取样算法的压气机特性建模

针对航空燃气轮机流量系数插值建模过程中,获取样本数据时的实验成本较高以及插值模型精度偏低这 2个问题,根据样本点在设计空间中的分布与模型精度的关系,在 Kriging插值模型的基础上,采用把垂距作为设计变量取值标准的取样算法。首先,将样本点与相邻 2点之间连线的垂距与垂距阈值进行比较,筛选出符合条件的数据点,形成候选点集;其次,选用高斯函数判定基础点集和候选点集的相关性;最后,使用该算法筛选后的样本点构建 Kriging插值模型。实验结果表明,该方法使用的样本点为原来数量的 70%左右,并且预测精度得到了提高,该方法是有效可行的。