Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程，并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程；设计模拟柔性负载，对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明，SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动；2)控制参数选取不当引起的转角波动。     

一种基于求解椭圆型方程的结构动网格生成方法

基于椭圆型网格生成法,实现了一种简单高效的贴体结构动网格生成方法,可用于具有移动边界问题的非定常流动数值模拟。该方法提出,在网格变形过程中,Poisson方程需要的控制网格间距和正交性的源项可以通过提取已知的静态网格源项直接得到,并在整个动网格生成过程中保持不变。因此,在椭圆型网格生成中需要通过外迭代确定源项的过程可以得到省略,而且该方法不需要人工指定参数。这使得方法具有高效和易于嵌入到已有程序中的特点。数值模拟结果证明,采用这种方法获得的网格能够较好地保持静态网格原有的正交性和光滑性,在相同迭代步数约束下,网格求解效率低于传统弹簧模拟法,但鲁棒性优于弹簧模拟法。     

前处理工艺对航空铝锂合金硫酸阳极氧化膜层性能影响

针对一种新研制的航空用Al-Li-Cu-Zn-Mg系铝锂合金,采用了光学显微镜、电子显微镜和能谱分析技术,分析碱腐蚀和三酸脱氧两种不同前处理工艺对铝锂合金硫酸阳极氧化膜层的外观、耐蚀性和疲劳性能的影响规律。结果表明:相比三酸脱氧工艺,碱腐蚀工艺对铝锂合金表面的腐蚀程度较深,晶界处的耐腐蚀能力较差,硫酸阳极氧化膜层表面形成了网状晶界形貌;采用碱腐蚀处理的试样疲劳寿命较三酸脱氧处理试样更低,而不同前处理后经过硫酸阳极氧化的试样疲劳寿命相差不大。不同前处理对铝锂合金的硫酸阳极氧化膜层的耐蚀性的影响不大。     

内外分区空间统一精度场建立方法研究

针对内外分区空间内结构和设备安装的数字化测量需求,研究内外参考点之间的关联技术,构建与外测量精度场相统一的内测量精度场。对于内外空间不同的开口数,利用多测点定位法、二测点和水平仪单站位定位法、二测点和水平仪双站位定位法等方法建立内精度场,实现与外精度场的统一。以某型设备为例进行试验表明,利用内外精度场测量同一检测点进行比较,测量的最大不一致误差为0.14 mm,证明构建模式可行、简单、可靠。     

A fast and automatic full-potential finite volume solver on Cartesian grids for unconventional configurations

To meet the requirements of fast and automatic computation of subsonic and transonic aerodynamics in aircraft conceptual design,a novel finite volume solver for full potential flows on adaptive Cartesian grids is developed in this paper.Cartesian grids with geometric adaptation are firstly generated automatically with boundary cells processed by cell-cutting and cell-merging algo rithms.The nonlinear full potential equation is discretized by a finite volume scheme on these Cartesian grids and iteratively solved in an implicit fashion with a generalized minimum residual (GMRES) algorithm.During computation,solution-based mesh adaptation is also applied so as to capture flow features more accurately.An improved ghost-cell method is proposed to implement the non-penetration wall boundary condition where the velocity-potential of a ghost cell is modified by an analytic method instead.According to the characteristics of the Cartesian grids,the Kutta condition is applied by specially computing the gradients on Kutta-faces without directly assigning the potential jump to cells adjacent wake faces,which can significantly improve the solution con verging speed.The feasibility and accuracy of the proposed method are validated by several typical cases of sub/transonic flows around an ONERA M6 wing,a DLR-F4 wing-body,and an unconventional figuration of a blended wing body (BWB).The validation cases demonstrate a fast convergence with fully automatic grid treatment and computation,and the results suggest its capacity in application for aircraft conceptual design.     

基于单平面双螺旋谐振单元新型左手传输线研究

对基于单平面双螺旋谐振单元的左手传输线进行了研究.对设计的单平面双螺旋单元结构的电磁特性进行仿真并与实际测量结果比较.用散射参数提取算法提取了该结构的折射率和相位常数,提取结果表明上述参数在特定频段同时为负,证明该结构具有左手特性.提出调整螺旋圈数控制传输线电磁特性的方法.通过仿真总结和检验了该参数的调整规律.     

光纤陀螺仪中尖峰脉冲引起漂移 的误差分析及其抑制

首次分析了光纤陀螺仪探测器输出信号中频率固定的尖峰脉冲对光纤陀螺 仪零偏漂移的影响机理,给出了尖峰脉冲影响光纤陀螺仪零偏漂移的误差模型;根据干 涉式数字闭环光纤陀螺仪探测器输出信号的特点,提出了一种基于高速集成模拟开关的 时域选通尖峰脉冲抑制具体实现方法,实验验证了尖峰脉冲引起的零偏漂移大小和理论 分析接近,表明了误差模型的正确性,同时表明该方法能够有效降低尖峰脉冲引起的光 纤陀螺仪零偏漂移。     

带后缘小翼的旋翼振动载荷计算

建立了考虑弹性桨叶、刚性小翼的旋翼气动弹性分析模型和旋翼载荷计算方法.以广义质量和广义力的形式描述小翼惯性力和气动力对系统的影响,以非定常/动态失速模型计算剖面气动力,结合基于实验数据修正的组合气动模型计算带小翼部分的剖面气动力,集成大变形桨叶模型考虑弹性变形的非线性,以力积分法计算桨叶剖面振动载荷.通过计算分析与实验结果相比较,验证了建立的气动弹性模型和载荷计算方法.结果表明:建立的桨叶结构模型精度很高,气弹模型能够准确预测旋翼的振动载荷,挥舞弯矩平均误差控制在9.1%,使用修正的小翼气动模型能有效提高小翼运动时桨叶振动载荷的计算精度.      

固体火箭发动机CT图像条状伪影校正

为了校正窄角扇束工业CT扫描重建的固体火箭发动机图像中的条状伪影,分析了条状伪影的产生原因.针对条状伪影是由重排和数据对齐后固体火箭发动机投影数据的非光滑连续性引起的,提出了条状伪影校正的两种算法.两种算法均以中间平移步数的投影数据为基准进行投影数据的重排,一种将重排和数据对齐过程分开处理;另一种将重排和数据对齐过程合并处理.为了验证两种条状伪影校正算法的有效性,采用窄角扇束工业CT对某型固体火箭发动机进行3种不同扫描步长的扫描和重建.结果表明重排和数据对齐过程分开处理的校正算法只有在小步长扫描的情况下重建效果较好,条状伪影较少;而重排和数据对齐过程合并处理的校正算法在3种不同的扫描步长下图像重建质量均较好,条状伪影较少.