飞行器板结构中Lamb波解析建模研究

通过理论分析,计算得到特定条件下的板结构中Lamb波的解析解和理论波形,从而为机遇Lamb波的飞行器结构健康监测工作提供坚实的基础.基于对金属板结构的空间-波数域弹性力学分析和压电材料传感器的力电耦合场分析,得到了金属板中Lamb波传播的一般解析解.基于此解析解,可以得到Lamb波传播的理论波形建模结果.为了验证这一解析建模结果,进行了金属板结构中的Lamb波传播实验,通过对比实验结果与建模结果,证明了这一解析建模结果的准确性.     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

基于Shannon复数小波和时间反转聚焦的复合

 在飞机结构上,复合材料结构大量应用。该种材料结构容易受到外界冲击而产生内部脱层等损伤,所以对复合材料结构的冲击事件进行在线结构健康监测是十分必要的。为了克服信号在复合材料结构中传播存在的频散、多种模式及模式转换的现象给冲击定位带来的困难,研究了一种基于Shannon复数小波和时间反转聚焦的复合材料结构多源冲击成像定位方法。分析了信号的时间反转聚焦原理,在此基础上,提出了冲击响应信号时反合成成像方法。针对宽带的冲击响应信号,利用Shannon复数小波变换提取冲击响应信号中特定尺度下的信号成分参与到成像过程中。整套方法在碳纤维复合材料层合板上得到了验证。验证结果表明该方法能够正确地对冲击监测区域中的多个冲击源进行成像和定位,冲击定位误差不超过2 cm。     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

空间材料实验炉的模拟热分析与地面试验分析

空间材料实验炉的温度分布对空间材料制备至关重要.通过对用于天宫二号空间实验室材料实验炉的物理模型进行合理简化,建立了三维传热数值计算模型,测量了实验炉材料的热物性参数,并根据地面试验工况进行模拟热分析计算,其结果能够很好地与地面试验结果吻合.采用模拟计算的方法分析样品物性参数对炉膛和样品中温度分布的影响,对实验炉的隔热部件进行优化设计,进而对炉体外表面温度进行了预测.数值仿真计算弥补了实验中测温点不足的问题,有助于进一步了解样品的温度分布,同时为实验炉隔热优化设计和安全运行提供了依据.      

Environmental stress level evaluation approach based on physical model and interval grey association degree

 Associating environmental stresses (ESs) with built-in test (BIT) output is an important means to help diagnose intermittent faults (IFs). Aiming at low efficiency in association of traditional time stress measurement device (TSMD), an association model is built. Thereafter, a novel approach is given to evaluate the integrated environmental stress (IES) level. Firstly, the selection principle and approach of main environmental stresses (MESs) and key characteristic parameters (KCPs) are presented based on fault mode, mechanism, and ESs analysis (FMMEA). Secondly, reference stress events (RSEs) are constructed by dividing IES into three stress levels according to its impact on faults; and then the association model between integrated environmental stress event (IESE) and BIT output is built. Thirdly, an interval grey association approach to evaluate IES level is proposed due to the interval number of IES value. Consequently, the association output can be obtained as well. Finally, a case study is presented to demonstrate the proposed approach. Results show the proposed model and approach are effective and feasible. This approach can be used to guide ESs measure, record, and association. It is well suited for on-line assistant diagnosis of faults, especially IFs.     

Evaluation of a combined electrostatic and magnetostatic configuration for active space-radiation shielding

Developing successful and optimal solutions to mitigating the hazards of severe space radiation in deep space long duration missions is critical for the success of deep-space explorations. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding. Here, we continue to extend the electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) a much better shielding and repulsion of incident ions from both solar particle events (SPE) and galactic cosmic rays (GCR), (ii) reductions in the power requirement for re-charging the electrostatic sub-system, and (iii) low requirements of the magnetic fields that are well below the thresholds set for health and safety for long-term exposures. Furthermore, our results show transmission levels reduced to levels as low as 30% for energies around 1000 MeV, and near total elimination of SPE radiation by these hybrid configurations. It is also shown that the power needed to replenish the electrostatic charges due to particle hits from the GCR and SPE radiation is minimal.     

基于某微型发动机对比分析轴流涡轮与向心涡轮的气动性能与减重

为了确定厘米级微型涡轮发动机在相对较大功率、流量需求时的涡轮形式,以实现发动机更高的性能,本文基于某直径12厘米微发样机开展研究。本文估算了该样机整机环境下单级轴流涡轮的做功能力,并按参数优选规律设计了一台微型轴流涡轮,将之与该样机所采用的微型向心涡轮进行对比,基于CFD和CAD工具分析了两种叶轮在功率、效率及尺寸重量方面的差别。研究表明：在先进微小型发动机总压比提高（4～6,本文设计采用4.2）的情况下,涡轮为了在保持效率的同时满足压气机更高的功率需求,轴流式必须采用双级方案,向心式单级就可满足要求;在压气机压比4～6条件下,进一步对比双级轴流与单级向心方案的结果显示,当流量小于500g/s时,向心式具有尺寸重量优势,发动机能实现较高的推重比。针对厘米级微型发动机,在发动机增压比较高且没有超出单级向心涡轮做功能力的范围时,向心涡轮方案是更好的选择。     

基于虚拟仪器的航空电气控制盒测试系统设计与实现

介绍了一种基于虚拟仪器的航空电气控制盒测试系统的设计和实现,该系统是一种针对各类飞机电气控制盒的开放式的综合测试系统。对系统中主要硬件的设计和上层测试软件的设计思想做了相关讨论,同时阐述了整个测试系统的实现功能和方法。利用该综合测试系统,可以开发出各类飞机电气控制盒的测试系统,克服了以往测试设备只能测试一个产品的缺点,提高了测试准确度和效率。     

航空发动机多路模糊切换控制系统设计

针对航空发动机在不同控制通路切换过程中出现的转速等参数发生大幅度跳变以及系统不稳定的问题,提出了一种模糊切换控制方法,设计了基于不同结构控制通路的模糊切换控制器,基于无源性概念对航空发动机多路模糊切换控制系统进行了稳定性分析,得到了多路模糊切换控制系统稳定的充分条件。航空发动机模糊切换系统与直接切换系统仿真结果表明了航空发动机多路模糊切换控制方法的有效性。