面向对象技术的防空导弹Simulink建模与仿真

为防空导弹系统性能改进研究和优化设计,提出了一种新的方法,首先给出了一般防空导弹制导控制系统的数学模型,并采用面向对象建模技术结合动态仿真软件Simulink建立了仿真模型并进行了仿真研究,该模型具有容易理解,可重复使用,易于扩展等优点,即通过部分模块更换或改变参数等就可对该系统在其他条件下进行仿真,仿真结果和实际遥测数据基本吻合,表明了该模型和方法的有效性和实用性。     

基于特征模型的全系数自适应控制系统稳定性研究

讨论了基于特征模型的黄金分割加逻辑微分自适应控制律组成闭环系统的稳定性问题。针对参数未知、线性定常或慢时变的二阶不稳定对象,本文给出了在采样周期满足一定条件下,上述闭环系统渐近稳定的充分条件,其中包含对于时变参数变化范围和非线性阻尼系数的约束条件。     

Earthshine and Asteroseismology Telescope (East) Network

Several automated optical telescopes have been setup at appropriate longitudes around the globe to study earthshine variations and asteroseismology. The first telescope has been setup at Teide Observatory, Tenerife, Spain in October 2004. The intensity of earthshine relates to the average of Earth’s albedo, and in turn relates to the global temperature of the Earth. A global network is necessary because each site can measure the earthshine reflected from only a part of the Earth. The network will also be used for asteroseismology study. It can measure photometric variations of pulsating stars. The long-term and continuous measurements allow the accurate determination of mode frequencies of stellar pulsations, which provides information on the properties of stellar interior.     

企业经济效益综合评价与分级管理方法

本文针对财政部设计的企业经济效益评价指标体系，用多目标优化方法的思想对其进行优化处理，并且数理统计方法将各指标值折算成分数以符合人们的习惯；同时，用数理分析等方法将所得的评价序列进行分级归类管理。     

陶瓷量块的研制

介绍了氧化锆精细陶瓷材料性能及二氧化锆陶瓷量块的优点 ,重点介绍了陶瓷量块的主要技术参数的检测结果 ,陶瓷量块的高硬度、耐磨损、不锈蚀和氧化、线膨胀系数接近于钢、尺寸稳定、研合性好、易维护的特性使之有着良好的市场发展前景。     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

毕棚沟 一路走过

梦是对无限、永远的可能的相信，而现实并不……黑、白棋总是在棋盘上腾转挪移，而黑、白并不……[编者按]     

航天任务飞行控制分析系统的设计和应用

介绍了一个基于windows环境下的多任务航天任务飞行控制分析系统的设计以及实际应用,该系统为任务分析人员、指挥决策人员在任务准备、实施中快速灵活地进行各种复杂条件下的航天任务分析提供了可视化的操作平台以及全面的图表和文字报告。系统采用数据库技术,为用户提供了各种航天器参数和测站参数等信息。文中介绍了该系统的软件结构、数学模型和功能设计,并给出了具体的仿真应用。