基于网格自适应的飞行器防热材料热传导系数辨识

为准确辨识高超声速飞行器防热材料热传导系数，构造了针对热传导偏微分方程系统的约束泛函极值问题，基于表征多项式逼近性能的Weierstrass定理，采用Lagrange多项式对热传导系数进行参数化建模，进而将无穷维的约束泛函极值问题转化为有限维的非线性规划问题，再利用基于动态优化方程的优化方法将此非线性规划问题转化为常微分方程初值问题进行求解。为从较有限的测量数据中准确地“学习”热传导系数，建立采用“过拟合”判别准则的网格自适应迭代算法改善辨识精度。研究表明本文采用的辨识策略与优化方法有效，辨识结果可以较准确地反映材料热传导系数的变化规律。     

Multi-parameter optimization of machining impeller surface based on the on-machine measuring technique

Selecting the optimal machining parameters for impeller surface is a challenging task in the automatic manufacturing industry, due to its free-form surface and deep-crooked flow channel. Existing experimental methods require lots of machining experiments and off-line tests, which may lead to high machining cost and low efficiency. This paper proposes a novel method of machining parameters optimization for an impeller based on the on-machine measuring technique. The absolute average error and standard deviation of the measured points are used to define the grey relational grade for reconstructing the objective function, and the complex problem of multi-objective optimization is simplified into a problem of single-objective optimization. Then, by comparing the values of the defined grey relational grade in a designed orthogonal experiment, the optimal combination of the machining parameters is obtained. The experiment-solving process of the objective function corresponds to the minimization of the used errors, which is advantageous to reducing the machining error. The proposed method is efficient and low-cost, since it does not require re-clamping the workpiece for off-line tests. Its effectiveness is verified by an on-machine inspection experiment of the impeller blade.     

Preliminary analysis of the quality and positioning performance of BDS-3 global interoperable signal B1C&B2a

BeiDou-3 Navigation Satellite System (BDS-3) satellites are equipped with the new generation GNSS signals B1C and B2a, which support the interoperability with GPS and Galileo systems. In this study, the pseudo-range multipath error and carrier phase observation noise of the BDS-3 B1C and B2a signals were evaluated based on zero baseline measurements from the day of year (DOY) 113 to 116, 2020. Further, the precision and performance of the single point positioning (SPP) and precise point positioning (PPP) are assessed at 9 stations. This assessment manifests that the standard deviations (STDs) of the pseudo-range multipath error are about 0.09 ~ 0.22 m, while STDs of the carrier phase observation noise are about 0.075 mm. For the single-frequency SPP, its positioning precision is about 2.03 ~ 4.85 m and 3.29 ~ 10.73 m at the 99.99% confidence level in horizontal and vertical directions, respectively, while the dual-frequency SPP precision is about 1.92 ~ 8.02 m and 4.81 ~ 12.77 m in horizontal and vertical directions, respectively. For the daily static PPP, the convergence time is about 20 ~ 30 min, while the daily positioning precision can reach 1.38 ~ 4.42 cm and -1.31 ~ 4.34 cm in horizontal and vertical directions, respectively. In general, the quality and the SPP and PPP performance of the BDS-3 B1C&B2a signals are comparable to the GPS and Galileo.     

飞机铆接件隐藏缺陷的远场涡流检测探头优化与试验

远场涡流检测技术因检测深度深和检测结果可靠性高等诸多优点适合飞机多层金属铆接构件的快速检测。针对飞机铆接件铆钉孔沿边隐藏裂纹的原位检测，建立了多层金属铆接构件隐藏缺陷平面远场涡流检测有限元模型，对激励线圈内径、磁路结构以及屏蔽阻尼进行了仿真优化，研制了激励线圈和检测线圈均带组合屏蔽结构的传感器，采用激励-检测线圈环绕铆钉旋转扫描的方式，研究多层金属铆接构件铆钉孔沿边隐藏裂纹信号特征。仿真与试验结果表明：罐形磁芯聚磁效果是柱形磁芯的1.85倍，采用铝+铜组合屏蔽罩能够将远场区提前10 mm，检测线圈位于缺陷正上方时，检测信号的幅值和相位存在极大值，且极大值随着缺陷埋深的增加逐渐下降，研究成果可望用于指导飞机多层金属铆接构件的工程检测实践。     

Inertial aided BDS triple-frequency integer ambiguity rounding method

The integer ambiguity resolution (AR) of carrier phase is significant for Global Navigation Satellite System (GNSS) precise positioning. However, in kinematic case, single-epoch AR methods based on alone GNSS are usually not reliable due to the instable pseudorange accuracy. Moreover, the computation of classical AR method Least Squares Ambiguity Decorrelation Adjustment (LAMBDA) is large. Thus, the inertial measurement unit (IMU) is introduced, a new inertial-aided AR method that directly rounds the float ambiguity of BeiDou triple-frequency combined observations, which is characterized by long wavelength, low carrier-phase noise and ionospheric delay, is proposed. The mathematical model of the new method is derived first. Then the impacts of the carrier-phase noise, ionospheric delay and inertial navigation system (INS) position error on the AR success ratio of combined observation are analyzed through probabilistic approach. Based on above investigation, the combinations (0, ?1, 1), (1, 4, ?5) and (4, ?2, ?3) are selected to resolve the original ambiguity. A vehicular integrated navigation test is performed to demonstrate the proposed method. The results show that the average AR success ratios of the three selected combinations, whose float ambiguity errors are 0.041, 0.146, 0.279 cycle respectively, are above 97.25% without regard to low-elevation C05. With respect to positioning accuracy based on our AR method when compared with IE software, the east, north, up error RMS of position are 0.042, 0.024, 0.069 m, respectively. In terms of the AR recover after the BeiDou signals outage, as long as 62 s BeiDou signal complete outage, all the ambiguities of all satellites could be re-fixed immediately. Besides, during the 90 s signals partial outage, the AR is not influenced by the position error, since the float ambiguity errors are all below half-cycle. The research of this contribution demonstrates the effectiveness of the proposed new method, which indicates it is applicable to kinematic positioning, even in BDS degraded and denied environments.     

Simulated microgravity inhibits cell wall regeneration of Penicillium decumbens protoplasts

This work compares cell wall regeneration from protoplasts of the fungus Penicillium decumbens under rotary culture (simulated microgravity) and stationary cultures. Using an optimized lytic enzyme mixture, protoplasts were successfully released with a yield of 5.3 × 10⁵ cells/mL. Under simulated microgravity conditions, the protoplast regeneration efficiency was 33.8%, lower than 44.9% under stationary conditions. Laser scanning confocal microscopy gave direct evidence for reduced formation of polysaccharides under simulated conditions. Scanning electron microscopy showed the delayed process of cell wall regeneration by simulated microgravity. The delayed regeneration of P. decumbens cell wall under simulated microgravity was likely caused by the inhibition of polysaccharide synthesis. This research contributes to the understanding of how gravitational loads affect morphological and physiological processes of fungi.     

大型或复杂构形辐射等效热平衡试验方法

对于大型或复杂构形不能参加的不完整状态热平衡试验,提出并证明了使试验等效完整状态的必要条件,即补偿两种状态下参试部位吸收的辐射热流之差。为验证这种等效方法的充分性,利用两种热分析软件对一个构造算例的多种状态进行了数值试验,结果表明方法可行。     

MPI和Pthread混合编程在NCS算法中的设计和实现

根据星载合成孔径雷达（Synthetic Aperture Radar,SAR）实时和准实时成像的需求,论文设计和实现了一种混合编程模式的非线性CS（Nonlinear Chirp Scaling, NCS）成像算法。此方法基于SMP（Symmetric Multiprocessing）集群系统,利用MPI（Message Passing Interface）和Pthread混合编程,实现了多进程和多线程的两级流水线并行成像处理。通过在HP刀片系统上的实验验证和结果分析,这种混合编程的流水线NCS并行成像算法既能较好适应前端系统传输一景原始回波数据时间不小于8s的情况,又能较好适应大规模原始回波数据堆积并且等待处理的情况。     

剥蚀对含孔试件疲劳寿命影响研究

剥蚀是影响老龄飞机结构完整性的重要因素之一。本文对LY12CZ铝合金含孔试件进行了预剥蚀疲劳试验,试验结果表明剥蚀使疲劳寿命下降,但其与剥蚀程度并不成正比。运用MSC.Marc中的单元"软化"技术模拟了剥蚀对试件应力分布影响,结果表明最大主应力不但与腐蚀深度有关,还与腐蚀形貌和位置有关。最后基于材料的初始不连续状态(initial discontinuity state,IDS),建立了评估剥蚀对含孔试件疲劳寿命影响的模型。预测值与试验结果比较表明,该模型预测结果精确,方法可靠。     

介质弹性对风洞液压控制系统影响的分析与测试

电液伺服系统广泛应用于风洞各种执行机构的控制中.随着风洞试验技术的发展,以及对机构小型化的要求,电液伺服系统的工作压力、控制精度不断提高.这种情况下,液体的弹性是不能忽略的.本文提出对液体体积弹性模量进行测试的两种工程方法,并进行了实际测量.对于风洞常用电液伺服系统,液体体积弹性模量在900~1000MPa.针对某风洞执行机构调试中发生的问题,利用油液弹性模量的测量结果进行了计算、分析,结果与现象吻合.