Physical characterization of the deep-space debris WT1190F: A testbed for advanced SSA techniques

We report on extensive ${\mathit{BVR}}_c{I}_c$ photometry and low-resolution ($\lambda /\mathrm{\Delta }\lambda ～250$) spectroscopy of the deep-space debris WT1190F, which impacted Earth offshore from Sri Lanka, on 2015 November 13. In spite of its likely artificial origin (as a relic of some past lunar mission), the case offered important points of discussion for its suggestive connection with the envisaged scenario for a (potentially far more dangerous) natural impactor, like an asteroid or a comet.Our observations indicate for WT1190F an absolute magnitude $R_c={32.45}_{\pm 0.31}$, with a flat dependence of reflectance on the phase angle, such as ${\mathit{dR}}_c/d?～{0.007}_{\pm 2}$?mag?deg^?1. The detected short-timescale variability suggests that the body was likely spinning with a period twice the nominal figure of $P_{\mathrm{flash}}={1.4547}_{\pm 0.0005}\mathrm{s}$, as from the observed lightcurve. In the ${\mathit{BVR}}_c{I}_c$ color domain, WT1190F closely resembled the Planck deep-space probe. This match, together with a depressed reflectance around 4000 and 8500 Å may be suggestive of a “grey” (aluminized) surface texture.The spinning pattern remained in place also along the object fiery entry in the atmosphere, a feature that may have partly shielded the body along its fireball phase perhaps leading a large fraction of its mass to survive intact, now lying underwater along a tight ($～1\times 80$?km) strip of sea, at a depth of 1500?m or less.Under the assumption of Lambertian scatter, an inferred size of ${216}_{\pm 30}/\sqrt{\alpha /0.1}$?cm is obtained for WT1190F. By accounting for non-gravitational dynamical perturbations, the Area-to-Mass ratio of the body was in the range $(0.006?\mathit{AMR}?0.011)$?m²?kg^?1.Both these figures resulted compatible with the two prevailing candidates to WT1190F’s identity, namely the Athena II Trans-Lunar Injection Stage of the Lunar Prospector mission, and the ascent stage of the Apollo 10 lunar module, callsign “Snoopy”. Both candidates have been analyzed in some detail here through accurate 3D CAD design mockup modelling and BRDF reflectance rendering to derive the inherent photometric properties to be compared with the observations.     

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

一种地理围栏内无人机航迹跟踪方法

针对UTM体制中无人机在地理围栏内的飞行监视问题,提出一种约束状态相关模态转换混合估计算法(CSDTHE)。采用随机线性混杂系统模型对无人机运动状态进行建模,利用CV、CT和CA三种模态描述无人机的飞行状态,以构建地理围栏内无人机运行的通用模态转换模型框架。利用飞行模态改变点(FMCP)定义相关模态转换参数,设计模态转换条件,生成模态转换概率矩阵,从而建立与状态相关的模态转换模型。运用约束卡尔曼滤波(CKF)方法对直线阶段和转弯阶段的无人机运动速度分别施加等式约束,并通过仿真实验验证了CSDTHE算法对无人机跟踪的有效性。     

基于动网格技术的飞机舱弹分离过程 CFD/ RBD耦合数值仿真

飞机舱弹分离瞬间特性严重影响导弹/炸弹的打击精度。采用计算流体动力学(CFD)和刚体动力学(RBD)模型耦合求解的数值仿真方法,应用网格弹性光顺和局部重构相结合的动网格技术,有效地避免了刚体运动而引起的网格畸变,仿真计算了炸弹舱弹分离后俯仰角度变化过程 .仿真结果表明,舱弹分离时向炸弹施加 1个合适的抛 射力矩,有助于炸弹在下降过程中快速地调整其打击姿态。     

奥氏体合金熔焊接头形变再结晶态的疲劳性能

焊接接头的微观组织和力学性能不均匀性影响疲劳性能,常用焊后热处理等工艺方法来改善。但奥氏体型合金固态无同素异构转变,焊后热处理难以明显地改善其微观组织和疲劳性能。形变再结晶工艺可以同时改善其微观组织和力学性能,进而可以非常显著地提高该焊接接头的抗疲劳断裂能力。本文主要讨论１Ｃｒ１８Ｎｉ９Ｔｉ熔焊接头形变再结晶态的微观组织和疲劳性能,并以该焊接接头的低循环疲劳性能来验证     

SQP方法在航空发动机加速过程控制中的应用研究

本文研究了采用非线性规划方法中的序列二次规划最优化方法解决涡轮风扇发动机加速过程的最优控制问题。在研究中,考虑了发动机加速过程中的压气机喘振边界、涡轮最高温度限制、转子最高转速限制、燃烧富油熄火限制等各种约束条件,以及执行机构的惯性、延迟等机械特性。仿真结果表明:应用序列二次规划法进行加速最优控制是可行的,发动机在加速过程中能准确地沿着各约束边界进行加速,从而充分发挥了发动机的潜力,大大地改善了发动机的加速性。      

基于Web技术的产品数据管理研究

将Web技术引入产品数据管理系统(PDM)的研究和设计,分析了PDM系统中原有构架的特点与存在的不足,利用Web技术所提供独到的网络、数据库和分布式处理技术,结合开发实例提出了在Internet/Intranet解决方案下开发和研究产品数据管理系统的基本构想,并给出产品数据管理应用的组织和底层数据模式,研究了其对产品数据管理技术应用前景的影响.研究表明,Web技术的引入,将有力地推进产品数据管理技术的发展和应用.